11-29-2017
thank you, but has many errors, forcing me to boot into maintenance mode. I will run some commands to see what i can find,
thanks
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
Discussion started by: agustincm
1 Replies
2. HP-UX
I have a machine running HP-UX 11.23 (PARISC) and APA startup fails on boot. This is found in /etc/rc.log:
Configure Auto-Port Aggregation(LAN Monitor) interfaces
Output from "/sbin/rc2.d/S343hplm start":
----------------------------
get_start_dlpi_version: failed, errno is 22
ERROR: ... (1 Reply)
Discussion started by: kknigga
1 Replies
3. Solaris
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Discussion started by: fugitive
3 Replies
4. UNIX for Advanced & Expert Users
Hi,
I am trying to setup a server for a diskless boot of a computer class (with ubuntu)
I followed the guidelines in https://help.ubuntu.com/community/DisklessUbuntuHowto
I have two computers: one is the server I installed and the other is my macbook on which I run a virtual machine... (8 Replies)
Discussion started by: yotamhc
8 Replies
5. Solaris
Good evening all,I'm new to your site, so please bear any infringements or transgressions on my part.I'm new to the whole Solaris boot install over the net scenario, but here's where I'm stuck:I have an M5000 with 2 domains (running unimode). Domain 0 is configured and running Solaris 10. Domain 1... (9 Replies)
Discussion started by: RandomSun
9 Replies
6. Solaris
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
Discussion started by: belalr
1 Replies
7. Solaris
I have a T2000 enterprise SPARC server that's no longer on contract with Oracle. It's on old firmware (6.3.x). After a power-down this weekend, it won't boot normally. Boot snapshot at the bottom of the post.
It can boot to cdrom, and it'll boot to failsafe mode, but it won't do a regular... (9 Replies)
Discussion started by: val riverwalk
9 Replies
8. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
9. UNIX for Beginners Questions & Answers
My OS solarius 5.10 Generic_147148-2 i86
Error: please review new boots environments using options
1. Solution - show me the commands
Partition is full, try to remove some unneeded files,
then try to compress some other unneeded files.
man command creates a temp file under... (0 Replies)
Discussion started by: zbest1966
0 Replies
10. Solaris
My system suddenly crash and when it rebooted there was an error:
/dev/rdsk/c1t0d0s3 is logging
svc.startd: svc:/network/nis/client:default: Method "/method/yp" failed with status 96.
The system completes booting however when I log in a user account / directory is not longer... (1 Reply)
Discussion started by: NeedSolarisHelp
1 Replies
LEARN ABOUT FREEBSD
color.4th
COLOR.4TH(8) BSD System Manager's Manual COLOR.4TH(8)
NAME
color.4th -- FreeBSD color-detection boot module
DESCRIPTION
The file that goes by the name of color.4th is a set of commands designed to simplify color logic. The commands of color.4th by themselves
are not enough for most uses. Please refer to the examples below for the most common situations, and to loader(8) for additional commands.
Before using any of the commands provided in color.4th, it must be included through the command:
include color.4th
This line is present in /boot/loader.4th file, so it is not needed (and should not be re-issued) in a normal setup.
The commands provided by it are:
loader_color? Returns FALSE if the loader_color environment variable is set to ``NO'' (case-insensitive) or ``0''. Otherwise
returns TRUE (unless booting serial).
The environment variables that effect its behavior are:
loader_color
If set to ``NO'' (case-insensitive) or ``0'', causes loader_color? to return FALSE, indicating to many modules that color
should not be used.
FILES
/boot/loader The loader(8).
/boot/color.4th color.4th itself.
/boot/loader.rc loader(8) bootstrapping script.
EXAMPLES
Standard i386 /boot/loader.rc:
Use color where applicable:
loader_color="YES"
SEE ALSO
loader.conf(5), loader(8), loader.4th(8)
HISTORY
The color.4th set of commands first appeared in FreeBSD 9.0.
AUTHORS
The color.4th set of commands was written by Devin Teske <dteske@FreeBSD.org>.
BSD
August 6, 2013 BSD