deleted data, now 99% free- but same result
do I have to destroy and recreate?
---------- Post updated at 06:29 AM ---------- Previous update was at 05:01 AM ----------
for some reason I can not get it to see the new disk , the new disk slice is 500 gig, but it is still seeing the old one that is 200g. do i have to destroy and re create using the new disk? i just thought replacing would do the trick.
Last edited by Scott; 11-10-2017 at 05:03 PM..
Reason: CODE tags
Actually have a few different issues, wondering if I could get input on (tried reading/searching for an answer, with no luck)
1. Have a v240 running sol9 that needs a bad disk replaced. So, here are the steps I took:
a. detached from mirroring
b. cleared mirroring (metaclear)
c.... (4 Replies)
solaris os run on X86.
bootdisk have been mirrored.but there is one disk miss,I want to replace the fail disk,but after I replace the disk,the system can't boot!
pls help! (2 Replies)
Originally Posted by panos83
Hello there Sir,
according to this old post,
https://www.unix.com/sco/100001-warni...ler-found.html
i try to restore an old image to a new hard disk drive.
The problem is that i don't have basic information such as:
1) Which btld driver do i... (3 Replies)
Hi,
Quick question.
I have a data zpool that consists of 1 disk.
pool: data
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
I added a disk to a zpool using "zpool add diskname"
My intention was mirror a zpool disk that no mirror; that is a zpool with only one disk. I did not issue the right command. Now, the disk has been added successfully but I cannot remove nor detach it as Solaris 11 thinks it has data on it... (14 Replies)
Hello,
I need some help in recovering ZFS pool. Here is scenerio. There are two disks -
c0t0d0 - This is good disk. I cloned it from other server and boot server from this disk.
c0t1d0 - This is original disk of this server, having errors. I am able to mount it on /mnt. So that I can copy... (1 Reply)
Hello,
I see hard and transport errors on all disks under treso pool and looks like some data corruption too. I want to take backup before, I reboot and replace disk. As of now, there are no slots free on server, so one option is, to break mirror, remove second disk (I need two disks, because... (5 Replies)
On an OmniOS server, I removed a single-disk pool I was using for testing.
Now, when I run zpool import it will show it as FAULTED, since that single disk not available anymore.
# zpool import
pool: fido
id: 7452075738474086658
state: FAULTED
status: The pool was last... (11 Replies)
Discussion started by: priyadarshan
11 Replies
LEARN ABOUT DEBIAN
dpm-getspacemd
DPM-GETSPACEMD(1) DPM Administrator Commands DPM-GETSPACEMD(1)NAME
dpm-getspacemd - get space metadata
SYNOPSIS
dpm-getspacemd --space_token s_token
dpm-getspacemd [ --token_desc u_token ]
dpm-getspacemd --help
DESCRIPTION
dpm-getspacemd gets the space metadata for a given space token or a space token description. If none of the options is specified, the
metadata for all the space tokens accessible by the user will be listed. For each token, it displays three lines. The first one gives the
space token, the user description and the poolname associated with it.
The second one gives the space usage restriction, either a DN or a list of VOMS FQANs.
The third one gives the size of the space, the amount of free space, the remaining space lifetime, the retention policy and the access
latency.
s_token
specifies the space token returned by a previous reservespace request.
u_token
specifies the user provided description associated with a previous reservespace request.
EXAMPLE
setenv DPM_HOST dpmhost
setenv DPNS_HOST dpnshost
dpm-getspacemd
fe869590-b771-4002-b11a-8e7430d72911 myspace pool1
dteam
10.00G 9.00G 24.0h REPLICA ONLINE
80e35f8b-7e4e-49a9-90b0-5d5a7ce7e8bc gilbert_1 pool1
dteam
146.48k 127.01k 1.1m REPLICA ONLINE
023a5ec1-03ea-464c-9af7-5246183ff5c5 gilbert_2 pool1
dteam
146.48k 127.01k 1.1m REPLICA ONLINE
dpm-getspacemd --token_desc myspace
fe869590-b771-4002-b11a-8e7430d72911 myspace pool1
dteam
10.00G 9.00G 24.0h REPLICA ONLINE
dpm-getspacemd --space_token fe869590-b771-4002-b11a-8e7430d72911
fe869590-b771-4002-b11a-8e7430d72911 myspace pool1
dteam
10.00G 9.00G 24.0h REPLICA ONLINE
EXIT STATUS
This program returns 0 if the operation was successful or >0 if the operation failed.
SEE ALSO dpm(1), dpm-reservespace(1)LCG $Date: 2008/09/24 11:25:00 $ DPM-GETSPACEMD(1)