I have intall a REdhat 9.0 as a server and Ive configure to act as a DHCP however Im having technical problems b/c the file /etc/dhcpd.conf does not exists. I went to the text edit and I created :
subnet 192.192.168.100.0 netmask 255.255.255.0 {
range 192.168.100.10 192.168.100.150;... (1 Reply)
Hi,
I need to get a script together to edit the dhcp service configuration file dhcpd.conf.
Mac addresses are defined in classes ex.
class "HOST1" { match if substring (hardware, 1,18)=00:11:11:FF:FF:FF;}
class "HOST2" ...
class "HOST3" ...
...
followed by allow or deny statements:... (4 Replies)
Hi,
I've setup DHCP Server on RH linux AS3 and everything works fine except static routes. They are not getting effected on client systems.
My dhcpd.conf:
+++++++++++
ddns-update-style interim;
ddns-updates off;
option domain-name-servers 192.168.116.122;
option domain-name... (3 Replies)
HI,
I want a help for Configuring snmpd.conf and snmptrapd.conf (i.e Configuring SNMP)
for receiving
TRAPS in my networks. I am using RHEL4.0 OS.
Please tell me How I can configure above two files in a proper way and at an
advanced level.
Especially I am getting... (2 Replies)
Hi all,
I am too new for this stuff and i am lost in perl tutorials. I need help to change dhcp entries in .conf file with a perl script.
The file entries are like below :
host bertha-clp-0 {
hardware ethernet AA:0A:A0:00:6c:40;
fixed-address 10.10.10.72;
option... (6 Replies)
Hi All,
Could you please help to resolve my following issues:
Problem Description:
Suppose my user name is "MI90".
i.e. $USER = MI90
when i run below command, i get all the processes running on the system containing name MQ.
ps -ef | grep MQ
But sometimes it lists... (8 Replies)
Hello all,
Newbie here.
I'm currently tasked with updating rsyslog.conf and auditd.conf on a large set of servers. I know the exact logging configurations that I want to enable. I have updated both files on on a server and hope to use the updated files as a template for the rest of the... (3 Replies)
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Hi Experts,
Our DHCP server currently answers the DHCP Discover requests from ServerX. In our dhcpd.conf file there are parameters defined for ServerX.
Now we introduced some additional Servers into the network and want them to get service from the same DHCP server.
Similar configuration... (13 Replies)
Discussion started by: ekorgur
13 Replies
LEARN ABOUT SUSE
tgt-setup-lun
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8)NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target
SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]
DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.
The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.
EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82
Create a target that uses /dev/sdb1 and allows connections from any initiator:
tgt-setup-lun -d /dev/sdb1 -n my_target
Display help:
tgt-setup-lun -h
AUTHOR
Written by Erez Zilber
REPORTING BUGS
Report bugs to <erezz@voltaire.com>.
COPYRIGHT
Copyright (C) Voltaire Ltd. 2008.
tgt-setup-lun(8)