How to check the IP:PORT firewall uses? Post: 303003987

10 More Discussions You Might Find Interesting

1. IP Networking

how can i check if port is busy or if someone is using it ?

Hello i have application that using ports , how can i check if the port im using is not captured by any applications?

2. Solaris

How to open SSH port on firewall?

Hi, So that potential responders will have an idea of what they're dealing with let me say that while I am a UNIX newbie I have been in IT for over 10 years. We have several SUN boxes running ver 5 of the OS that have been sitting dormant for some time as they were part of a now defunct...

3. Linux

can ping without firewall; no port 631

Well, since I wrote the below, I've learned a little more about Samba, and got them to at least acknowledge each other. Still can't use Gaurd dog. Still cant print from one to the other. I'm learning I'm learning I recently installed mepis 7 on both my laptop and laptop. (I came...

4. Linux

using firewall to block port

Hi, I will like to allow access to the mysql port (3306) to certain IP address. All other IP's should be automatically blocked. What is the best way to do this?

5. UNIX for Dummies Questions & Answers

How do you check whether a port currently being used?

Hi, Please help me out, how to check whether a port currently being used or not. is there any command which give the result? Thanks Rajesh

6. IP Networking

Is there any way to add an exception for a port in the firewall setting, permanently?

Hello, I want to add a port in the firewall exception list so that my application can be accessed over network even if firewall is disabled. I am using iptables command to add exception. The problem is, after setting the rule if I change the firewall setting i.e. on/off then it is overwriting...

7. Shell Programming and Scripting

Firewall Check Script

Hello, I made a following script that check every 5 minutes to check firewall is running or not, if firewall down that raise an alert only once, but following script generate an alert every 5 minutes according to cronjob: FILE="/var/log/fwstatus" CHK="/tmp/fwstatus" service...

8. UNIX for Dummies Questions & Answers

Rsync port and firewall

hi guys I doing some collocation for a customer, customer requested to use other port for ssh not the default one. OK no problem and customer will be using rsync to sync backups among other things I know we have to open port let's say port 5999 for ssh since we are using that one now but I...

9. Shell Programming and Scripting

Good way to check firewall port on Linux centos 7

Hi, I need to know what kind of firewall settings does the linux box have? Is port 25 blocked in any way? Linux techx 3.10.0-514.10.2.el7.x86_64 #1 SMP Fri Mar 3 00:04:05 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux I'm coming from this thread.

10. Shell Programming and Scripting

Unable to open firewall port for external traffic.

Below is what i did to open the firewall port on # sudo firewall-cmd --zone=public --add-port=27012/tcp --permanent Warning: ALREADY_ENABLED: 27012:tcp success # sudo firewall-cmd --reload success # firewall-cmd --list-all public target: default icmp-block-inversion: no ...

LEARN ABOUT DEBIAN

fwb_iosacl

fwb_pix(1)							 Firewall Builder							fwb_pix(1)

NAME

       fwb_ipt - Policy compiler for Cisco IOS ACL

SYNOPSIS

       fwb_iosacl [-vV] [-d wdir] [-4] [-6] [-i] -f data_file.xml object_name

DESCRIPTION

       fwb_iosacl  is  firewall  policy compiler component of Firewall Builder (see fwbuilder(1)). Compiler reads objects definitions and firewall
       description from the data file specified with "-f" option and generates resultant Cisco IOS ACL configuration file.  The  configuration	is
       written	to  the  file  with the name the same as the name of the firewall object, plus extension ".fw". Compiler generates extended access
       lists for Cisco routers running IOS v12.x using "ip access-list <name>" syntax. Compiler  also  generates  "ip  access-group"  commands	to
       assign  access  lists  to interfaces. Generated ACL configuration can be uploaded to the router manually or using built-in installer in the
       fwbuilder(1) GUI.

       The data file and the name of the firewall objects must be specified on the command line. Other command line parameters are optional.

OPTIONS

       -4     Generate iptables script for IPv4 part of the policy. If any rules of the firewall refer to IPv6 addresses, compiler will skip these
	      rules.   Options	"-4"  and  "-6"  are  exclusive.  If  neither option is used, compiler tries to generate both parts of the script,
	      although generation of the IPv6 part is controlled by the option "Enable IPv6 support" in the "IPv6"  tab  of  the  firewall  object
	      advanced settings dialog.  This option is off by default.

       -6     Generate iptables script for IPv6 part of the policy. If any rules of the firewall refer to IPv6 addresses, compiler will skip these
	      rules.

       -f FILE
	      Specify the name of the data file to be processed.

       -d wdir
	      Specify working directory. Compiler creates file with ACL configuration in this directory.  If this parameter is missing, then  gen-
	      erated ACL will be placed in the current working directory.

       -v     Be verbose: compiler prints diagnostic messages when it works.

       -V     Print version number and quit.

       -i     When this option is present, the last argument on the command line is supposed to be firewall object ID rather than its name

URL

       Firewall Builder home page is located at the following URL: http://www.fwbuilder.org/

BUGS

       Please report bugs using bug tracking system on SourceForge:

       http://sourceforge.net/tracker/?group_id=5314&atid=105314

SEE ALSO

       fwbuilder(1), fwb_pix(1), fwb_ipfw(1), fwb_ipf(1), fwb_ipt(1) fwb_pf(1)

FWB
																	fwb_pix(1)