In a test directory on my host, where I created all the files you showed with the touch command.
Again: the error you posted is not reproducible without further information. The reason I insist is that the proposal in post#2 is the most cost / resource effective one and should work perfectly.
Hello RudiC,
you can download the Valentina Server Linux 64 DEB deb package from here: Download
then unpack it with
Then you get three files:
control.tar.gz
data.tar.xz
debian-binary
Further, you can unpack the data.tar.xz archive and get three directories:
etc/
opt/
usr/
In the opt/VServer/ dir there is among others the
vcomponents/ dir, which contains the files which are in question.
You can see there that in vcomponents/ dir is only one version of libraries, currently it is 740 version. So at a time there is only one number at the end of some filenames.
When my ebuild on Gentoo Linux system unpack the downloaded deb package, it gets the exact dirs and files out there. Naturally, the files and it's versions will change at time.
I hope I explained to you what is the situation. Right?
Hi,
I need to extract only a part of the filenames of some files. The files are named this way :
.tap_profile_SIT02
I want the "SIT02" part, which is not the same for each file. I was able to get what I want with bash, but not with ksh. Here is the command I used in bash :
find... (8 Replies)
I like to have the date in the 2008-09-01 format at the beginning of my filenames. I then hyphenate after that and then have my filename.
I have a script that creates this for me. However, I may be working on files that already have the date format already in there and so I don't want to have a... (4 Replies)
I've many file like this
01-file
01_-_file
01_-_file
01_-_file
01_-_file
01-file
I would remove bold part from filename. Suggestions?Thanks (4 Replies)
Hi All,
I'm trying to get part of a filename and my skill with regular expression are lacking. I know I need to use SED but have no idea how to use it. I'm hoping that someone can help me out. The file names would be:
prefix<partwewant>suffix.extension
the prefix and suffix are always 3... (4 Replies)
Hi All,
I have the file & name is "/a/b/c/d/e/xyz.dat"
I need "/a/b/c/d/e/" from the above file name.
I tryning with echo and awk. But it not come. Please help me in this regard.
Thanks & Regards,
Dathu (3 Replies)
Hi All,
Thanks in Advance
I am working on a shell script. I need some assistance.
My Requirement:
1) There are some set of files in a directory like given below
OTP_UFSC_20120530000000_acc.csv
OTP_UFSC_20120530000000_faf.csv
OTP_UFSC_20120530000000_prom.csv... (0 Replies)
Hi All,
Thanks in Advance
I am working on a shell script. I need some assistance.
My code:
if
then
set "subscriber" "promplan" "mapping" "dedicatedaccount" "faflistSub" "faflistAcc" "accumulator"\
"pam_account";
for i in 1 2 3 4 5 6 7 8;... (0 Replies)
Hi All,
Thanks in Advance
Shell Script or Perl Script
I am working on a shell script. I need some assistance.
My Requirement:
1) There are some set of files in a directory like given below
OTP_UFSC_20120530000000_acc.csv
OTP_UFSC_20120530000000_faf.csv... (7 Replies)
Hi guys!
I have quite a lot of files like
all_10001_ct1212307460308.alf*
and I want to get rid of the first number for all at once like:
all_ct1212307460308.alf*
How can I do this in the shell? (12 Replies)
Hello,
I need to add a part of folder name to the files inside it. For instance the file is
HMCBackup_20150430.155027.tgz
and it is under directory /nim/dr/HMCBackup/cops22
I need to add cops22 to the file name so as it would be cops22_HMCBackup_20150430.155027.tgz
Any help in doing... (10 Replies)
Discussion started by: hasn318
10 Replies
LEARN ABOUT POSIX
deb
deb(5) dpkg suite deb(5)NAME
deb - Debian binary package format
SYNOPSIS
filename.deb
DESCRIPTION
The .deb format is the Debian binary package file format. It is understood since dpkg 0.93.76, and is generated by default since dpkg 1.2.0
and 1.1.1elf (i386/ELF builds).
The format described here is used since Debian 0.93; details of the old format are described in deb-old(5).
FORMAT
The file is an ar archive with a magic value of !<arch>. Only the common ar archive format is supported, with no long file name
extensions, but with file names containing an optional trailing slash, which limits their length to 15 characters (from the 16 allowed).
File sizes are limited to 10 ASCII decimal digits, allowing for up to approximately 9536.74 MiB member files.
The tar archives currently allowed are, the old-style (v7) format, the pre-POSIX ustar format, a subset of the GNU format (new style long
pathnames and long linknames, supported since dpkg 1.4.1.17; large file metadata since dpkg 1.18.24), and the POSIX ustar format (long
names supported since dpkg 1.15.0). Unrecognized tar typeflags are considered an error. Each tar entry size inside a tar archive is
limited to 11 ASCII octal digits, allowing for up to 8 GiB tar entries. The GNU large file metadata support permits 95-bit tar entry sizes
and negative timestamps, and 63-bit UID, GID and device numbers.
The first member is named debian-binary and contains a series of lines, separated by newlines. Currently only one line is present, the
format version number, 2.0 at the time this manual page was written. Programs which read new-format archives should be prepared for the
minor number to be increased and new lines to be present, and should ignore these if this is the case.
If the major number has changed, an incompatible change has been made and the program should stop. If it has not, then the program should
be able to safely continue, unless it encounters an unexpected member in the archive (except at the end), as described below.
The second required member is named control.tar. It is a tar archive containing the package control information, either not compressed
(supported since dpkg 1.17.6), or compressed with gzip (with .gz extension), xz (with .xz extension, supported since 1.17.6) or zstd (with
.zst extension, supported since 1.19.0.5ubuntu2), as a series of plain files, of which the file control is mandatory and contains the core
control information, the conffiles, triggers, shlibs and symbols files contain optional control information, and the preinst, postinst,
prerm and postrm files are optional maintainer scripts. The control tarball may optionally contain an entry for '.', the current
directory.
The third, last required member is named data.tar. It contains the filesystem as a tar archive, either not compressed (supported since
dpkg 1.10.24), or compressed with gzip (with .gz extension), xz (with .xz extension, supported since dpkg 1.15.6), zstd (with .zst
extension, supported since 1.19.0.5ubuntu2), bzip2 (with .bz2 extension, supported since dpkg 1.10.24) or lzma (with .lzma extension,
supported since dpkg 1.13.25).
These members must occur in this exact order. Current implementations should ignore any additional members after data.tar. Further members
may be defined in the future, and (if possible) will be placed after these three. Any additional members that may need to be inserted after
debian-binary and before control.tar or data.tar and which should be safely ignored by older programs, will have names starting with an
underscore, '_'.
Those new members which won't be able to be safely ignored will be inserted before data.tar with names starting with something other than
underscores, or will (more likely) cause the major version number to be increased.
MEDIA TYPE
Current
application/vnd.debian.binary-package
Deprecated
application/x-debian-package
application/x-deb
SEE ALSO deb-old(5), dpkg-deb(1), deb-control(5), deb-conffiles(5)deb-triggers(5), deb-shlibs(5), deb-symbols(5), deb-preinst(5), deb-postinst(5),
deb-prerm(5), deb-postrm(5).
1.19.0.5 2018-04-16 deb(5)