Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Hello gurus,
I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place.
Environment: Migrating from CX4 to VMAX - using OR/Hot Pull.
Here are the steps I have put together - HPUX gurus please... (5 Replies)
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT FREEBSD
zfsloader
ZFSLOADER(8) BSD System Manager's Manual ZFSLOADER(8)NAME
zfsloader -- kernel bootstrapping final stage
DESCRIPTION
zfsloader is an extended variant of loader(8) with added support for booting from ZFS. This document describes only differences from
loader(8).
ZFS FEATURES
zfsloader supports the following format for specifying ZFS filesystems which can be used wherever loader(8) refers to a device specification:
zfs:pool/filesystem:
where pool/filesystem is a ZFS filesystem name as described in zfs(8).
If /etc/fstab does not have an entry for the root filesystem and vfs.root.mountfrom is not set, but currdev refers to a ZFS filesystem, then
zfsloader will instruct kernel to use that filesystem as the root filesystem.
ZFS COMMAND EXTENSIONS
lsdev [-v]
Lists ZFS pools in addition to disks and partitions. Adding -v shows more ZFS pool details in a format that resembles zpool status
output.
lszfs filesystem
A ZFS extended command that can be used to explore the ZFS filesystem hierarchy in a pool. Lists the immediate children of the
filesystem. The filesystem hierarchy is rooted at a filesystem with the same name as the pool.
FILES
/boot/zfsloader zfsloader itself.
EXAMPLES
Set the default device used for loading a kernel from a ZFS filesystem:
set currdev=zfs:tank/ROOT/knowngood:
SEE ALSO gptzfsboot(8), loader(8), zfs(8), zfsboot(8), zfsloader(8), zpool(8)HISTORY
The zfsloader first appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BSD September 15, 2014 BSD