08-06-2017
Solaris to EMC Storage connectivity is a big subject, so much so that EMC issued a book on it. Whilst fully respecting EMC's Copyright to this material, I uploaded a copy to this forum over 5 years ago. You can find it attached to this thread:
Iscsiadm issue
If you are well experienced with Unix/HP-UX this might be all you need along with a good supply of coffee.
Last edited by hicksd8; 08-06-2017 at 11:25 AM..
These 2 Users Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. HP-UX
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Discussion started by: Hils
0 Replies
2. Solaris
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Discussion started by: dede
2 Replies
3. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
4. Solaris
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Discussion started by: rahul.kurumkar
0 Replies
5. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
6. HP-UX
Hello gurus,
I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place.
Environment: Migrating from CX4 to VMAX - using OR/Hot Pull.
Here are the steps I have put together - HPUX gurus please... (5 Replies)
Discussion started by: jps460
5 Replies
7. AIX
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies
8. HP-UX
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
9. AIX
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies
10. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT DEBIAN
io::all::http
IO::All::HTTP(3pm) User Contributed Perl Documentation IO::All::HTTP(3pm)
NAME
IO::All::LWP - Extends IO::All to HTTP URLs
SYNOPSIS
use IO::All;
$content < io('http://example.org'); # GET webpage into scalar
io('http://example.org') > io('index.html'); # GET to file
"hello
" > io('http://example.org/index.html'); # PUT webpage
# two ways of getting a page with a password:
$content < io('http://me:secret@example.org');
$content < io('http://example.org')->user('me')->password('secret');
DESCRIPTION
This module extends IO::All for dealing with HTTP URLs. Note that you don't need to use it explicitly, as it is autoloaded by IO::All
whenever it sees something that looks like an HTTP URL.
The SYNOPSIS shows some simple typical examples, but there are many other interesting combinations with other IO::All features! For
example, you can get an HTTP URL and write the content to a socket, or to an FTP URL, of to a DBM file.
METHODS
This is a subclass of IO::All::LWP. The only new method is "http", which can be used to create a blank IO::All::HTTP object; or it can also
take an HTTP URL as a parameter. Note that in most cases it is simpler just to call io('http://example.com'), which calls the "http" method
automatically.
OPERATOR OVERLOADING
The same operators from IO::All may be used. < GETs an HTTP URL; > PUTs to an HTTP URL.
SEE ALSO
IO::All, IO::All::LWP, LWP.
AUTHORS
Ivan Tubert-Brohman <itub@cpan.org> and Brian Ingerson <ingy@cpan.org>
COPYRIGHT
Copyright (c) 2007. Ivan Tubert-Brohman and Brian Ingerson. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
See <http://www.perl.com/perl/misc/Artistic.html>
perl v5.10.0 2007-03-29 IO::All::HTTP(3pm)