08-06-2017
Solaris to EMC Storage connectivity is a big subject, so much so that EMC issued a book on it. Whilst fully respecting EMC's Copyright to this material, I uploaded a copy to this forum over 5 years ago. You can find it attached to this thread:
Iscsiadm issue
If you are well experienced with Unix/HP-UX this might be all you need along with a good supply of coffee.
Last edited by hicksd8; 08-06-2017 at 11:25 AM..
These 2 Users Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. HP-UX
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Discussion started by: Hils
0 Replies
2. Solaris
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Discussion started by: dede
2 Replies
3. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
4. Solaris
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Discussion started by: rahul.kurumkar
0 Replies
5. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
6. HP-UX
Hello gurus,
I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place.
Environment: Migrating from CX4 to VMAX - using OR/Hot Pull.
Here are the steps I have put together - HPUX gurus please... (5 Replies)
Discussion started by: jps460
5 Replies
7. AIX
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies
8. HP-UX
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
9. AIX
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies
10. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT DEBIAN
libravatar::url
Libravatar::URL(3pm) User Contributed Perl Documentation Libravatar::URL(3pm)
NAME
Libravatar::URL - Make URLs for Libravatars from an email address
SYNOPSIS
use Libravatar::URL;
my $url = libravatar_url( email => 'larry@example.org' );
DESCRIPTION
See <http://www.libravatar.org> for more information.
Functions
libravatar_url
# By email
my $url = libravatar_url( email => $email, %options );
# By OpenID
my $url = libravatar_url( openid => $openid, %options );
Constructs a URL to fetch the Libravatar for the given $email address or $openid URL.
%options are optional. "libravatar_url" will accept all the options of "gravatar_url" in Gravatar::URL except for "rating" and "border".
The available options are...
size
Specifies the desired width and height of the avatar (they are square).
Valid values are from 1 to 512 inclusive. Any size other than 80 may cause the original image to be downsampled using bicubic resampling
before output.
size => 40, # 40 x 40 image
default
The url to use if the user has no avatar.
default => "http://www.example.org/nobody.jpg"
Relative URLs will be relative to the base (ie. libravatar.org), not your web site.
Libravatar defines special values that you may use as a default to produce dynamic default images. These are "identicon", "monsterid",
"wavatar" and "retro". "404" will cause the URL to return an HTTP 404 "Not Found" error instead and "mm" will display the same "mystery
man" image for everybody. See <http://www.libravatar.org/api> for more info.
If omitted, Libravatar will serve up their default image, the orange butterfly.
base
This is the URL of the location of the Libravatar server you wish to grab avatars from. Defaults to <http://cdn.libravatar.org/avatar/>
for HTTP and <https://seccdn.libravatar.org/avatar/> for HTTPS.
short_keys
If true, use short key names when constructing the URL. "s" instead of "size", "d" instead of "default" and so on.
short_keys defaults to true.
https
If true, serve avatars over HTTPS instead of HTTP.
You should select this option if your site is served over HTTPS to avoid browser warnings about the presence of insecure content.
https defaults to false.
LICENSE
Copyright 2011, Francois Marier <fmarier@gmail.com>.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
See http://dev.perl.org/licenses/artistic.html
SEE ALSO
<http://www.libravatar.org> - The Libravatar web site
<http://www.libravatar.org/api> - The Libravatar API documentation
perl v5.14.2 2012-04-04 Libravatar::URL(3pm)