Linux router help needed Post: 302996228

Sponsored Content

Top Forums UNIX for Beginners Questions & Answers Linux router help needed Post 302996228 by ygemici on Friday 21st of April 2017 03:51:23 PM

04-21-2017

Registered User

Hi apoklyps3

* we have needed some inputs/outputs Smilie

could you write what you did ( commands and outputs ) ?
where did you extract to unpack the firmware ? ( external stroage ? )
can you see the images/files as separately ( bootloader/kernel/rootfs and the others.. )
do you have the orginal firmware image outside the flash ?

* i can try search your hardware but i cannot find any usefull infos.

so i have to learn this :

your device chip details
your flash chip details
cat /proc/mounts ( and fstab ? )
cat /proc/mtd
have you any tools ? ( flash_erase / nandwrite ... )
( can you list the your binaries related flash that you have .. )
what is your boot-loader ? any screen output releated booting ?
can you execute the boot-loader commands ( so is there any prompt ? )
can you paste the dmesg or /var/log/messages files ?
did you try the plug in the usb drive and kernel see it ? ( like /dev/sdaX )
are there any kernel configs ( /proc/configXX , /boot/config* )

ygemici

View Public Profile for ygemici

Find all posts by ygemici

3 More Discussions You Might Find Interesting

1. IP Networking

Linux Router?

I am trying to set up a linux box as a router, but I am a little confused on how to do this. I am using Red Hat 9.0 on a machine that has 2 nic cards. Also, I am using a DSL pppoe connection. I have installed rp-pppoe and I am connected to the internet via the pseudo pppoe interface. I have...

2. Cybersecurity

Help needed in IPTables firewall/router setup - Linux

HI all, I have setup IPTables firewall/Router and my home network, with address space 192.168.10.XXX Form my private network hosts, i can ping the gateway ( 192.168.10.101 ) , but the reverse is not happening. Can someone help me as of what i need to do, so that i can ping my private...

3. Shell Programming and Scripting

Expect script help needed- script failing if router unavailable

Hey all. Sometimes I'm tasked to change some router configs for the entire network (over 3,000 Cisco routers). Most of the time its a global config parameter so its done with a loop and an IP list as its the same configuration change for all routers. This is working OK. However, sometimes an...

LEARN ABOUT LINUX

ipwfw

IPWFW(4)						   BSD Kernel Interfaces Manual 						  IPWFW(4)

NAME

     ipwfw -- Firmware Module for Intel PRO/Wireless 2100 driver

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device ipwfw

     This will include three firmware images inside the kernel.  If you want to pick only the firmware image for the mode you want to operate your
     network adapter in choose one of the following:

	   device ipwbssfw
	   device ipwibssfw
	   device ipwmonitorfw

     Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):

	   ipw_bss_load="YES"
	   ipw_ibss_load="YES"
	   ipw_monitor_load="YES"

DESCRIPTION

     This module provides access to firmware sets for the Intel PRO/Wireless 2100 series of IEEE 802.11 adapters.  It may be statically linked
     into the kernel, or loaded as a module.

     For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/intel_ipw/LICENSE must be agreed to by adding the following
     line to loader.conf(5):

	   legal.intel_ipw.license_ack=1

FILES

     /usr/share/doc/legal/intel_ipw/LICENSE  ipwfw firmware license

SEE ALSO

     ipw(4), firmware(9)

BSD
								 January 14, 2010							       BSD