Hi;
Can someone please explain how do connections differ from threads? or a link to a good site about connection pooling and how threads are utilized by the OS.
Thanks (1 Reply)
hi,
i am looking for a tool to see how many CPUs, controlled by FSS inside a pool, a project used over some time....
i have a 20k with several zones inside some pools. the cpu-sets/pools are configured with FSS and the zones with different shares. Inside the zones, i use projects with FSS... (2 Replies)
I created a pool the other day. I created a 10 gig files just for a test, then deleted it.
I proceeded to create a few files systems. But for some reason the pool shows 10% full, but the files systems are both at 1%? Both files systems share the same pool.
When I ls -al the pool I just... (6 Replies)
I need to migrate an existing raidz pool to a new raidz pool with larger disks. I need the mount points and attributes to migrate as well. What is the best procedure to accomplish this. The current pool is 6x36GB disks 202GB capacity and I am migrating to 5x 72GB disks 340GB capacity. (2 Replies)
i have this pool1 on my sun4u sparc machine
bash-3.00# zpool get all pool1
NAME PROPERTY VALUE SOURCE
pool1 size 292G -
pool1 used 76.5K -
pool1 available 292G -
pool1 capacity 0% -... (1 Reply)
Hi!
I would also like to know if I need first to create a pool before I can mirror my disks inside that pool.
My first disk is c7t0d0s0 and my second disk is c7t2d0s0 as seen in the figure below.
I would create a pool named rpool1 for this 2 disks.
# zpool create rpool1 c7t0d0p0 c7t2d0p0 ... (18 Replies)
I am trying to test simple zfs functionality on a FreeBSD 8.2 VM. When I try to run a 'zpool create' I receive the following error:
# zpool create zfspool /dev/da0s1a
cannot create 'zfspool': no such pool or dataset
# zpool create zfspool /dev/da0
cannot create 'zfspool': no such pool or... (3 Replies)
I have a single zpool with 3 2-way mirrors ( 3 x 2 way vdevs) it has a degraded disk in mirror-2, I know I can suffer a single drive failure, but looking at this how many drive failures can this suffer before it is no good? On the face of it, I thought that I could lose a further 2 drives in each... (4 Replies)
Hi all,
I am trying out Solaris 11.3
Realize the option of -p when using beadm that i can actually create another boot environment on another pool.
root@Unicorn6:~# beadm create -p mypool solaris-1
root@Unicorn6:~# beadm list -a
BE/Dataset/Snapshot Flags... (1 Reply)
Discussion started by: javanoob
1 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
04-19-2017
