03-21-2017
Hi,
Hmm, OK - that looks like I'd expect it to. Normally errors like that appear if the SETGID bit isn't properly set on the binary (the 's' in the
r-s group permissions), but it appears to be.
Does your Sendmail log shed any light on this ? On RHEL this would normally be
/var/log/maillog. You could also take a look at the other logs in
/var/log while you're at it, in case something there sheds light on why this isn't working.
Also - is SELinux enabled on this system ? If it is, do you need it to be ?
---------- Post updated at 04:55 PM ---------- Previous update was at 04:49 PM ----------
Hi,
Also, another follow-up: I've just really realised you're running this as a regular user, sorry. If you try using the
mail command instead, does it work ? So something like this:
/bin/mail -s "test" address@domain.com
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello All,
I have installed Cygwin on Windows XP and working with some Shell scripting work, I have needed to schedule my script using the cornetab and whatever commands such as "cron", "cron-config" are not working in my cygwin shell,
I re-installed the Cygwin but the same problem is with... (2 Replies)
Discussion started by: sriya
2 Replies
2. Shell Programming and Scripting
i am having a weird error on mac os x running some shell scripts. i am a complete newbie at this and this question concerns 2 scripts. one of which a friend of mine wrote (videochecker.sh) a couple weeks ago and it's been running fine on another machine.
then last week i wrote capture.sh and it... (2 Replies)
Discussion started by: danpaluska
2 Replies
3. Shell Programming and Scripting
I am trying to create a shell that asks the user to enter their name, and compare it to my own by saying we have the same name or saying my name and that they have a nice name too. Here is my script...
#!/bin/bash-x
echo "Enter your name".
read name
if
then
echo "My name is Adam too"... (1 Reply)
Discussion started by: amaxey45
1 Replies
4. Post Here to Contact Site Administrators and Moderators
Hi,
Today, I've submitted a new tread in "Shell Programming and Scripting" forum, with title "-bash: ELF: command not found ". However, this thread has disappear.
Can somebody give me an explanation?
Regards. (3 Replies)
Discussion started by: Sonia_
3 Replies
5. Shell Programming and Scripting
Hi All,
Linux lxs3er06 2.6.9-67.ELsmp #1 SMP Wed Nov 7 13:58:04 EST 2007 i686 i686 i386 GNU/Linux
Issue:
While executing shell scripts in bash shell, following error messages are thrown:
rm:command not found
On doing little investigation, I added '/bin' to $PATH and on doing echo... (9 Replies)
Discussion started by: a1_win
9 Replies
6. Red Hat
Hi all
I am relatively new to linux (specifically red hat). I have installed Fedora 13 on my machine and started playing with the terminal when i found a very strange behavior when typing a command that is not found:
the terminal does not prompt me back. In other words, i am logged as root (or... (4 Replies)
Discussion started by: abohmeed
4 Replies
7. Shell Programming and Scripting
I downloaded and installed "Cygwin yesterday onto my PC running Windows XP. When I tried to type "vi" in Cygwin's window, I got the following message bash: vi: Command not found
What shud i do inorder to get into vi editor
Thanks (10 Replies)
Discussion started by: bobby1015
10 Replies
8. Shell Programming and Scripting
I created a script that I need to run from time to time, but get this error message. To get it working again I run this command from time to time:
export PATH="$PATH:~/scripts"
I put all my automated scripts in the /scripts directory and would like to run my scripts from any directory... (5 Replies)
Discussion started by: catalinawinemxr
5 Replies
9. Shell Programming and Scripting
Hello Geeks,
Greetings...I have the following script:
#!/usr/bin/bash
#Script to generate number of active PDP context & calculate PDP activation #failurefrom EPG-M
#Script written by Gbenga Adigun
#September 12, 2013
username="xxxxxx"
password="xxxxxxxxx"
HOSTS=(
ggsn01... (6 Replies)
Discussion started by: infinitydon
6 Replies
10. Shell Programming and Scripting
In the bash below, if the answer is "y" then goto function remove. If the answer is "n" then goto the id variable line (where the date is inputted). However, I am getting command remove not found, but remove is a function not an command. I must have the syntax incorrect? Thank you :).
... (3 Replies)
Discussion started by: cmccabe
3 Replies
LEARN ABOUT OSF1
syslog.conf
syslog.conf(4) Kernel Interfaces Manual syslog.conf(4)
NAME
syslog.conf - syslogd configuration file
SYNOPSIS
facility.severity destination Where: Is part of the system generating the message, specified in /usr/include/sys/syslog_pri.h.
See also the syslogd(8) reference page. The severity level, which can be emerg, alert, crit, err, warning, notice, info, or debug. See
/usr/include/sys/syslog_pri.h.
The syslogd daemon logs all messages of the specified severity level plus all messages of greater severity. For example, if you
specify level err, all messages of levels err, crit, alert, and emerg or panic are logged. A local file pathname to a log file, a
host name for remote logging or a list of users. In the latter case the users will receive messages when they are logged in. An
asterisk (*) causes a message to be sent to all users who are currently logged in.
DESCRIPTION
The /etc/syslog.conf file is a system file that enables you to configure or filter events that are to be logged by syslogd. You can specify
more than one facility and its severity level by separating them with semicolons.
You can specify more than one facility logs to the same file by separating the facilities with commas, as shown in the EXAMPLES section.
The syslogd daemon ignores blank lines and lines that begin with an octothorpe (#). You can specify # as the first character in a line to
include comments in the file or to disable an entry. The facility and severity level are separated from the destination by one or more tab
characters.
If you want the syslogd daemon to use a configuration file other than the default, you must specify the file name with the following com-
mand: # syslogd -f config_file
Daily Log Files
You can specify in the /etc/syslog.conf file that the syslogd daemon create daily log files. To create daily log files, use the following
syntax to specify the path name of the message destination: /var/adm/syslog.dated/ { file} The file variable specifies the name of the log
file, for example, mail.log or kern.log. If you specify a /var/adm/syslog.dated/file path name destination, each day the syslogd daemon
creates a sub-directory under the /var/adm/syslog.dated directory and a log file in the sub-directory, using the following syntax:
/var/adm/syslog.dated/ date / file Where: The date variable specifies the day, month, and time that the log file was created. The file
variable specifies the name of the log file you previously specified in the /etc/syslog.conf file. The syslogd daemon automatically cre-
ates a new date directory every 24 hours and also when you boot the system. The current directory is a link to the latest date directory.
To get the latest logs, you only need to reference the /var/adm/syslog.dated/current directory.
EXAMPLES
The following is a sample /etc/syslog.conf file: # # syslogd config file # # facilities: kern user mail daemon auth syslog lpr binary #
priorities: emerg alert crit err warning notice info debug # kern.debug /var/adm/syslog.dated/kern.log user.debug /var/adm/sys-
log.dated/user.log daemon.debug /var/adm/syslog.dated/daemon.log auth.crit;syslog.debug /var/adm/syslog.dated/syslog.log mail,lpr.debug
/var/adm/syslog.dated/misc.log msgbuf.err /var/adm/crash.dated/msgbuf.savecore kern.debug /var/adm/messages kern.debug /dev/console *.emerg
*
FILES
/etc/syslog.conf
/etc/syslog.auth - Authorization file for remote logging.
/usr/include/sys/syslog_pri.h - Common components of a syslog event log record.
RELATED INFORMATION
Commands: /usr/sbin/syslogd(8), /usr/sbin/binlogd(8)
System Administration delim off
syslog.conf(4)