Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Creating a VM
Operating Systems SCO Creating a VM Post 302992763 by jgt on Wednesday 1st of March 2017 11:26:57 AM
Old 03-01-2017
Creating a VM
Also, in my tinkering around I was able to get SCO installed on a VM, using VM Workstation version 12.5 in a Windows 7 Pro-64 computer. I chose the VM Workstation 8.x compatibility model for my VM, an IDE hard drive at 0:0 and an IDE CD Rom at 1:0 using the physical drive of the computer. Using the defbootstr command at installation it went like a champ. I even installed the keyboard mouse and the graphic screen/mouse is working. The only problem I have is I can't find instructions about how to install the network card driver. I selected "bridge mode" when I created the VM, and SCO did not recognize my NIC at installation, it is a Realtek PCIe GBE Family NIC on the mother board. I believe it is compatible with 5.0.6a, and I think I found the driver, but I have no clue how to get it installed. My only option is from a CD (I think) and I don't know how to do that. The Software Manager does not recognize what I downloaded and burned to the CD as "software" and I am clueless - could you advise me? I can't find any instructions online. I would like to have this VM as a "backup" plan, I would not use it unless the physical server goes down again. Thanks again for all your help.

---------- Post updated at 11:26 AM ---------- Previous update was at 11:23 AM ----------

Run netconfig to add a new network card.
How the driver is installed depends upon the format of the device driver file.

If it is VOL.000.000 then it is installed through 'custom'. Otherwise it may have a setup or intall binary or script, or it may install using pkgadd.
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Need help creating a script

I need to automate the following process: I have a list of ip address for printers in a file called iplist.txt, I need to take that list and run the command snmpget -v 1 -c public ip address sysName.0 for each ip address to see if the printer is running snmp, I want to the create a file... (4 Replies)
Discussion started by: inLine6
4 Replies

2. Programming

creating so's

hi everyone i have a doubt about ".so" files. what is the need of ".so" files. why we use ".so" files. where we can use ".so" files. how can i create ".so" files. can u tell me a good example please thank you (6 Replies)
Discussion started by: ramesh.jella
6 Replies

3. HP-UX

creating users

hi, can any one help in how to get the numeric user id through useradd command ?? or any other command for the same?? (1 Reply)
Discussion started by: vishwaraj
1 Replies

4. UNIX for Dummies Questions & Answers

creating a schema

hi guys, Unix dummy here. I need help creating a script for class. The assignment reads as follows: create a script that will create a new schema in schema.txt, it must accept 7 arguments (the first being the name of the schema) the other 6 being the 6 field names. the schema has to be tested... (1 Reply)
Discussion started by: zodester
1 Replies

5. Solaris

Creating a partition....???

I have created a pool named earthpool using zpool command. Later I created a file system named earth using zfs command. I changed the mountpoint of earth (file system) using zfs set mountpoint=/earth earthpool/earth. Where /earth is a directory created in root using mkdir. Now, I have a... (8 Replies)
Discussion started by: bharu_sri
8 Replies

6. Shell Programming and Scripting

creating scripts

Hello... First of all, as a new member, i found this forum very helpful and all the members have great knowledge. I am trying to learn unix online, as i have to make a script to monitor a solaris machine performance. I found UNIX not as hard as i thought but making scripts and printing it... (5 Replies)
Discussion started by: mohamedh_14
5 Replies

7. Shell Programming and Scripting

help needed with creating challenging bash script with creating directories

Hi, Can someone help me with creating a bash shell script. I need to create a script that gets a positive number n as an argument. The script must create n directories in the current directory with names like map_1, map_2 etcetera. Each directory must be contained within its predecessor. So... (7 Replies)
Discussion started by: I-1
7 Replies

8. Shell Programming and Scripting

Creating Directory

Hi All, As I m very new for Unix, I need to check for a directory and move a file. If Directory is not found, The script should create a directory and move the file. Can any one help here. (7 Replies)
Discussion started by: vikramtk
7 Replies

9. UNIX for Dummies Questions & Answers

Creating an array

I am having trouble creating an array, I've tried everything google gives me but it won't work, and it seems as though it should. Using Ubunto 12.04 and bash. #!/bin/bash ARRAY=one two three echo ${ARRAY}When I do this I receive the error : two: not found and : Bad substitution When I... (3 Replies)
Discussion started by: jrymer
3 Replies

10. Homework & Coursework Questions

Creating a .profile, displaying system variables, and creating an alias

Use and complete the template provided. The entire template must be completed. If you don't, your post may be deleted! 1. The problem statement, all variables and given/known data: Here is what I am supposed to do, word for word from my assignment page: 1. Create/modify and print a... (2 Replies)
Discussion started by: Jagst3r21
2 Replies

LEARN ABOUT HPUX

insf

insf(1M)																  insf(1M)

NAME

       insf - install special (device) files

SYNOPSIS

       class | driver] directory] hw-path] instance] npty] nstrpty]

DESCRIPTION

       The  command  installs  special	files  in the devices directory, normally If required, creates any subdirectories that are defined for the
       resulting special file.	Both the legacy and persistent device special files (see intro(7)) are created, unless specified.

       If no options are specified, special files are created for all new devices in the system.  New devices are those devices for which no  spe-
       cial files have been previously created.  A subset of the new devices can be selected with the and options.

       With the option, reinstalls the special files for pseudo-drivers and existing devices.  This is useful for restoring special files when one
       or more have been removed.

       Normally, displays a message as the special files are installed for each driver.  The (quiet) option suppresses the  installation  message.
       The (verbose) option displays the installation message and the name of each special file as it is created.

       With  the  option,  enables  the  legacy naming model.  If the option is included, also displays the current mode, legacy, or agile without
       changing the current mode.

   Options
       recognizes the following options.

	      Match devices that belong to a given device class,
			     class.  Device classes can be listed with the command (see lsdev(1M)).  The special class includes  all  pseudo-driv-
			     ers.  This option cannot be used with

	      Match devices that are controlled by the specified device driver,
			     driver.  Device drivers can be listed with the command (see lsdev(1M)).  This option cannot be used with

	      Override the default device installation directory
			     and  install  the special files in directory instead.  directory must exist; otherwise, displays an error message and
			     exits.  See

	      Reinstall the special files for pseudo-drivers and existing devices.
			     This is useful for restoring special files if one or more have been removed.

	      Match devices at a given hardware path,
			     hw-path.  Hardware paths can be listed with the command (see ioscan(1M)).	A hardware path specifies the addresses of
			     the  hardware  components	leading  to  a device.	It consists of a string of numbers separated by periods such as (a
			     card), (a target address), and (a device).  If a hardware component is a bus converter, the following period, if any,
			     is replaced by a slash as in and

			     If  the  specified  path  contains fewer numbers than are necessary to reach a device, special files are made for all
			     devices at addresses that extend the given path.  If the specified path is  then  special	files  are  made  for  the
			     devices  at  addresses etc.  In the agile view (see intro(7)), the devices will have new hardware path formats, which
			     can be displayed using the command with option (see ioscan(1M)).

	      Match a device with the specified
			     instance number.  Instances can be listed with the option of the command (see ioscan(1M)).

			     This option is effective only if the option is specified or if an appropriate device class  or  driver  is  specified
			     with a or option.

	      Enable the legacy naming model.
			     This  command reinstalls the legacy I/O nodes and legacy device special files which might have been removed with (see
			     rmsf(1M)).  When used with the option, reports on whether legacy mode is enabled or disabled.

	      Install	     npty special files for each specified and driver.	The driver specifies both the and drivers.  npty is a decimal num-
			     ber.

			     This  option  is  effective  only if the option is specified or if an appropriate device class or driver is specified
			     with a or option.

			     If this option is omitted, npty defaults to 60 for the and drivers.

	      Quiet option.  Normally, displays a message as each driver is processed.	This option suppresses the driver message, but	not  error
			     messages.	See the option.

	      Install	     nstrpty  slave-side  stream  special files for the driver.  nstrpty is a decimal number.  This option only applies to
			     the special file installation.

			     This option is effective only if the option is specified or if an appropriate device class  or  driver  is  specified
			     with a or option.

			     If this option is omitted, nstrpty defaults to 60.

	      Verbose option.
			     In  addition  to  the  normal  processing	message,  display the name of each special file as it is created.  See the
			     option.

   Naming Conventions
       Some special files follow a naming convention, where class is the driver class, and instance is the instance number assigned by the operat-
       ing system to the device.

       Many other special files are named using the naming convention.	These variables have the following meaning wherever they are used.

	      card	The unique interface card identification number from (see ioscan(1M)).	It is represented as a decimal number.

	      target	The  device  target  number, for example the address on a HP-FL or SCSI bus.  It is represented as a decimal number with a
			typical range of 0 to 15.

	      device	A address unit within a device, for example, the unit in a HP-FL device or the LUN in a SCSI device.  It is represented as
			a decimal number with a typical range of 0 to 15.

   Special Files
       This subsection shows which special files are created and the permissions for each of the supported device drivers.

       The special file names are relative to the installation directory, normally This directory may be overridden with the option.

       sets the file permissions and the owner and group IDs.  They are shown here in a format similar to that of the command:

		       special-file   permissions owner group
       For example:

       The following special file is installed:

       For the built-in serial port, the following special files are installed for
	      each card instance:

						Direct connect

       For the SAS console ports, the following special files are installed for
	      each card instance:

						local console port (direct connect)

						remote session port (direct connect)

						internal console port (direct connect)

						UPS port (direct connect)

						local session port (direct connect)

       The following special files are installed:

       The following special files are installed.
	      Note the underscore before card in each special file name.

	      For card 0, the device files are linked to files without the trailing in their names.

						Default audio device

						Audio control device

						All outputs, A-law format

						All outputs, 16-bit linear format

						All outputs, Mu-law format

						External output, A-law format

						External output, 16-bit linear format

						External output, Mu-law format

						Internal speaker output, A-law format

						Internal speaker output, 16-bit linear format

						Internal speaker output, Mu-law format

						Line output, A-law format

						Line output, 16 bit linear format

						Line output, Mu-law format

						No output, A-law format

						No output, 16 bit linear format

						No output, Mu-law format

       The following special file is installed:

       For each card instance, the following special file is installed.

							  Handshake mode 2, character entry

       For each card instance, the following special files are installed:

						Direct connect

       The following special files are installed:

       The following persistent special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special files are installed:

       For each disk device, the following special files are installed:

							       Block entry

							       Character entry

	      For disc3 instances, the following additional special files are installed:

							       Block entry

							       Character entry

	      For disk instances that are partitioned, the following additional special files are installed:

								  Block entry

								  Character entry

       The following special files are installed:

       The following special file is installed:

       The following special file is installed:

       The following persistent special file is installed:

       The following persistent special file is installed:

       For each driver instances of
	      the following persistent special files are installed:

						     Block entry

						     Character entry

	      For disk instances that are partitioned, the following additional persistent special files are installed:

								  Block entry

								  Character entry

       For each driver instances of
	      the following persistent special files are installed:

								  Character entry

								  Character entry

								  Character entry

								  Character entry

       The following special file is installed:

       For each graphics device, the following special files are installed.

		     device_number
	      is 0 indexed and is assigned in the order in which the devices appear in output.

	      If  the  console	device	is  a  graphics device, the files and are created as the console device.  If the console is not a graphics
	      device, and are identical to and

       For each device, the following special files are installed.
	      Note the underscore before card in each special file name.

	      For card 0, the device files are linked to files named for the link addresses 1 to 7; for the cooked keyboard device;  and  for  the
	      controller device.

						addr:
				  link addresses to

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       For each card instance, the following special files are installed:

       For each card instance, the following special files are installed:

							  Normal access

							  Exclusive access

       For each card instance, the following special files are installed:

       The following special files are installed:

						Minor

						Minor

						Minor

       The following persistent special files are installed:

       For each instance of a 6-channel card,
	      the following special files are installed:

						port:
				  to direct connect

						For each instance of a 16-channel card,
				  the following special files are installed:

						port:
				  to direct connect

       For each instance of an 16-channel card,
	      the following special files are installed:

						port:
				  to direct connect

						For each card instance of an 8-channel card,
				  the following special files are installed:

						port:
				  to direct connect

						For each card instance of an 3-channel card,
				  the following special files are installed:

						port:
				  and direct connect

       For each card instance,
	      the following special files are installed:

						port:
				  and direct connect

       The following special file is installed:

       The following special file is installed:

       For each instance of a PCI mux card,
	      the following "Direct Connect" special files are created.  The term card below refers to the instance number of the mux card.

								  port_module:
						    to port module name
						    port: to port number

       For each card instance, the following special files are installed:

							       Block entry

							       Character entry

       The following special files are installed:

						Autosearch for first ps2 keyboard

						Autosearch for first ps2 mouse

						ps2 port 0

						ps2 port 1

       The following special file is installed:

       The following special files are installed:

						number:
				  to

       Specifying this driver tells
	      to install the special files for both the master and slave pty drivers, and

	      The command is equivalent to the two commands and

       The following special files are installed:

							  index:
					    to to to number: to (hexadecimal)

					    The first 48 special files are linked to

							  index:
					    to to to number: to

							  index:
					    to to to number: to

       The following special files are installed:

							  index:
					    to to to number: to (hexadecimal)

					    The first 48 special files are linked to

							  index:
					    to to to number: to

							  index:
					    to to to number: to

       The following special file is installed:

       The following special file is installed:

       The following special files are installed:

       The following special file is installed:

       For each card instance, the following special files are installed:

						port:
				  to direct connect

       Special file names for
	      use the format:

	      For each autochanger device, the following special file is installed:

							       Character entry

       The following special files are installed:

							  Character entry

       See

       See

       The following persistent special file is installed:

       For each driver instance, different special files are installed
	      depending  on  the number of characters allowed in the target directory.	There are two lists below, one for long file name directo-
	      ries and one for short file name directories (14 characters maximum).

	      Note that the first four special files in each list for tape driver instances 0-9 are also linked to and respectively.

	      For installation in a long file name directory:

							       AT&T-style, best available density, character entry

							       Berkeley-style, best available density, character entry

							       AT&T-style, no rewind, best available density, character entry

							       Berkeley-style, no rewind, best available density, character entry

	      For installation in a short file name directory:

							       AT&T-style, best available density, character entry

							       Berkeley-style, best available density, character entry

							       AT&T-style, no rewind, best available density, character entry

							       Berkeley-style, no rewind, best available density, character entry

	      For both long and short file name directories, the following additional files are created.

							       Tape configuration, character entry

							       For
						 only, diagnostic access, character entry

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       See

       The following special file is installed:

       The following persistent special files are installed:

       The following special file is installed:

       The following special files are installed:

						number:
				  to

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       The following special file is installed:

       RETURN VALUE
	      exits with one of the following values:

	      Successful completion, including warning diagnostics.
	      Failure.

DIAGNOSTICS

       Most diagnostic messages from are self-explanatory.  Listed below are some messages deserving further clarification.

   Warnings
		     The indicated device driver or device class is not present in the kernel.
	      A device driver and/or device class can be added to the kernel using

	      All of the instance numbers available for the device class are already assigned.	Use the command to  remove  any  unneeded  devices
	      from the system (see rmsf(1M)).

	      does  not  know  how  to	create	special  files	for  the specified device driver.  Use to create special files for the device (see
	      mknod(1M)).

EXAMPLES

       Install special files for all new devices belonging to the device class claimed by driver:

       Install special files to the new device added at hardware path

       Install persistent special files to the new device added at the hardware path

       Reinstall persistent special files for all the devices belonging to the device driver:

       Enable legacy mode (reinstalls all legacy I/O nodes and legacy device special files):

       Find out if legacy mode is enabled or disabled:

WARNINGS

       can change the mode, owner, or group of an existing special file, or unlink and recreate one; special files that are currently open may	be
       left in an indeterminate state. Hence is recommended to be run in single-user mode.

       Many commands and subsystems assume their device files are in therefore the use of the option is discouraged.

AUTHOR

       was developed by HP.

FILES

       I/O system special file

       I/O system configuration database

       I/O system configuration database

SEE ALSO

       ioscan(1M), kcmodule(1M), lsdev(1M), lssf(1M), mknod(1M), mksf(1M), rmsf(1M), intro(7).

																	  insf(1M)
All times are GMT -4. The time now is 06:18 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy