03-01-2017
Could be many things. The configuration from the Unix side looks fine, but have your considered:-
- A physical link issue
- not connected to right switch
- faulty or disabled port on the NIC
- faulty or disabled port on the switch
- faulty cable
- Configuration on the switch making the port part of a different VLAN
- Routing error on the switch
- Something else?
10 More Discussions You Might Find Interesting
1. IP Networking
We are unable to bring one of our linux boxes into the network once it was restarted. But once we stop and start the network service. We are able to ping the gateway and get into network. After a minute or two we get the following reponse for the ping command
64 bytes from 124.168.215.40:... (6 Replies)
Discussion started by: chrisanto_2000
6 Replies
2. IP Networking
Hello this is my first post at this forum.
Apologize for my lack of network understanding
but Im posting to learn.
I have a problem reaching default gateway 10.18.110.1
If I use my laptop I can ping 10.18.110.1 but with our red hat multihomed server the gateway does not respond to ping.
cat... (11 Replies)
Discussion started by: vettec3
11 Replies
3. Solaris
I was install new solaris10 on m4000 model after that i "ping -s" to default gateway but it's take longtime (2 Min) to reply and if i use "ping" only it's reply to fase(2 sec). any body who can tell me about my problem and how to fix it please. i'm try to fix several days. (2 Replies)
Discussion started by: cesmk
2 Replies
4. AIX
Hello,
I am new to Unix :D and have been trying to configure an AIX server running 5.3. I used smitty or smit to configure interface 0 on the server. I am able to ping the IP I set, however I am still unable to ping the gateway. I configured the IP by navigating to Communications Applications... (6 Replies)
Discussion started by: cdub50
6 Replies
5. Red Hat
I know the subject line is very similar to: destination host unreachable
but the problem with my machine appears to be somewhat different from that thread. apologies if I missed something from there.
We recently moved a machine physically and from one subnet to another . I used... (1 Reply)
Discussion started by: mirage
1 Replies
6. UNIX for Dummies Questions & Answers
I have NCR MP-RAS unix. I have been trying for several months to get our network working since we had never used it before. I have setup all routes that I can think of. I know it has something to do with the routing table, because out of sheer luck I was able to get it working, and than like a... (4 Replies)
Discussion started by: Rutgerncas
4 Replies
7. AIX
I just reinstalled a fresh install of 5300 07 on an old 44p model 170, after installing I set an IP Address on en2 and I tried to the ping default gateway, no response. I tried a
startsrc -g tcpip
... and then I can ping the default gateway. I broke the ping and tried again to ping. I cannot... (1 Reply)
Discussion started by: asyed123
1 Replies
8. Red Hat
Hi,
Here is the issue: There are 2 identical systems in the same subnet here. They can ping and ssh each other. One can ping the default gateway and one can not with error '... icmp_seq Destination Host Unreachable'. I can't find any difference between the two systems in terms of network... (4 Replies)
Discussion started by: aixlover
4 Replies
9. AIX
Hi,
I installed AIX 7.1 on a blade though (hmc with vio). I can ping the IP address, but not the gateway. Is there anything that I should configure?
Is there anything that I have to check with vio setting or Am I missing any configuration?
Please let me know further.
Thank you (5 Replies)
Discussion started by: pjeedu2247
5 Replies
10. UNIX for Beginners Questions & Answers
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
routes(4) Kernel Interfaces Manual routes(4)
NAME
routes - Specifies Internet routing information to the routing tables
SYNOPSIS
/etc/routes
DESCRIPTION
Static routes can be defined in the /etc/routes file. The /etc/routes file identifies static routes that are automatically added to the
network routing tables with the /usr/sbin/route add command. The /sbin/init.d/route script contains the /usr/sbin/route add command that
is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.
The general format of an entry in the /etc/routes file is: Dest Name1 Name2
The following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
work or to a host. The two possible keywords are -net and -host. The name or address of the destination network or host. Name1 can be
either a symbolic name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format. The
name or address of the gateway host to which messages should be forwarded. Name2 can be either a symbolic name (as used in the /etc/hosts
file) or an Internet address specified in dotted-decimal format.
The routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such. See the System Administration manual for more
information.
EXAMPLES
To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:
-net net2 host4
This example specifies a route to a network, net2, through the gateway host4. To specify a route to a host through a gateway host
with an entry in the /etc/routes file, enter:
-host host2 host4
This example specifies a route to a host, host2, through the gateway host4. To specify a route to a default gateway host with an
entry in the /etc/routes file, enter:
default 130.9.0.5
This example specifies a route to a default gateway with an Internet address of 130.9.0.5.
FILES
Contains the /usr/sbin/routed add command.
RELATED INFORMATION
Commands: route(8)
Daemons: gated(8), routed(8)
Files: gated.conf(4)
Network Administration delim off
routes(4)