DAT="dat"
while read fname
do
fname=${fname/(sysdate)/$TIMESTAMP}
if [ -f $location1/$fname*$DAT ]; then
echo " $fname.dat exists in $location1" > $log_file
else
# ...
fi
It's working fine for
Code:
file_claim_(sysdate)_mly.dat
But not for
Code:
file_claim_(sysdate)_mly.bz2
I did add else if condition for bz2 file it does not seem to work .i just wanna trigger alert if both of these doesn't exist or any one from both name should be printed in mail I am sending.
... ... ...
Look at the text marked in red from your post above. Note that the names you are using are inconsistent. If you are looking for a filename with an underscore between claim and today's date, you won't find it using a pattern that does not have an underscore in that position. (Close may count in horseshoes; but not in programming. )
Hi
If there is a file upload done from a remote server
and if the file remains without being extracted for more than an hour,
I need to identify the files and create an alert message to the
users in the other end.
please help me writing a shell script for it.
Regards
Yazhini (2 Replies)
Hey all,
I'm attempting to migrate a zone from one system to another, but I noticed that on the new system ssl BASEDIR was missing. I was wondering if creating the directory path for this would fix the issue when I migrate files over.
SSL is installed on the new system but does not show a... (1 Reply)
My whatis file is missing from my /usr/share/lib directory. I know I can recreate it by using catman -w command.
My question is, why do all of my other servers have it and this one doesn't. Maybe due to a recent move of old to new servers and it just wasn't copied over. Unlikely, 'cause all... (0 Replies)
Hi All,
Below is my requirement.
I want to display the missing files in the directory. Below is my example
From SFTP we are copying 10 files every day. if any files missed on that day need to send a notification with missing files
Test1.dat
20121107_00_file.csv
20121107_01_file.csv... (8 Replies)
Hi,
Archive backup log is /oracle_backup/logs .
Since yesterday /logs directory is missing.How to find What has changed since the last time it has worked?
OS -- Linux 2.6 x86_64
Regards,
Maddy (4 Replies)
Hi,
i am using rhel6.4, i lost my directory under /home .is there any way to find the reason how that directory deleted and how to recover deleted folder. (2 Replies)
The contents of my service file srvtemplate-data-i4-s1.conf is
Description=test service for users
After=network.target local-fs.target
Type=forking
RemainAfterExit=no
PIDFile=/data/i4/srvt.pid
LimitCORE=infinity
EnvironmentFile=%I
.
.
.
WantedBy=multi-user.target (0 Replies)
In the below bash I am trying to ensure that all folders (represented by $folders) in a given directory are created. In the file f1 the trimmed folder will be there somewhere (will be multiple trimmed folders).
When that trimmed folder is found (represented by $S5) the the contents of $2 printed... (19 Replies)
Discussion started by: cmccabe
19 Replies
LEARN ABOUT SUNOS
datadm
datadm(1M)datadm(1M)NAME
datadm - maintain DAT static registry file
SYNOPSIS
/usr/bin/datadm [-v] [-u] [-a service_provider.conf] [-r service_provider.conf]
The datadm utility maintains the DAT static registry file, dat.conf(4).
This administrative configuration program allows uDAPL service providers to add and remove themselves to the dat.conf file.
You can add or remove interface adapters that a service provider supports from a system after its installation. You can use datadm to
update the dat.conf file to reflect the current state of the system. A new set of interface adapters for all the service providers cur-
rently installed is regenerated.
The following options are supported:
-a service_provider.conf
Enumerate each device entry in the service_provider.conf(4) file into a list of interface adapters, that is, interfaces to external
network that are available to uDAPL consumers.
-r service_provider.conf
Remove the list of interface adapters that corresponds to the device entry in the service_provider.conf(4) file.
-u
Update the dat.conf to reflect the current state of the system with an up to date set of interface adapters for the service providers
that are currently listed in the DAT static registry.
-v
Display the DAT static registry file, dat.conf.
Example 1: Enumerating a Device Entry
The following example enumerates a device entry in the service_provider.conf(4) file into interface adapters in the dat.conf(4) file.
Assume that SUNW has a service provider library that supports the device tavor. It has a service_provider.conf(4) file installed in the
directory /usr/share/dat/SUNWudaplt.conf with a single entry as follows:
driver_name=tavor u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
tavor is an Infiniband Host Channel Adapter with two ports. Both IB ports exist in a single IB partition, 0x8001. If an IP interface is
plumbed to each port, there are two IPoIB device instances, ibd0 and ibd1:
# ls -l /dev/ibd*
/dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
/dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1
Running the command, datadm -a /usr/share/dat/SUNWudaplt.conf appends two new entries (if they do not already exists]) in the
/etc/dat/dat.conffile:
ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
Example 2: Updating the dat.conf to Reflect the Current State of the System
A new IB partition, 0x8002 is added to the above example covering port 1 of the Host Channel Adapter. If a new IP interface is plumbed to
port 1/partition 0x8002, there is a third IPoIB device instance: ibd2.
# ls -l /dev/ibd*
/dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
/dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1
/dev/ibd2 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8002,ipib:ibd2
Running datadm -u command, updates the /etc/dat/dat.conf file with a new entry added reflecting the current state of the system.
datadm -v shows that there are now three entries in the /etc/dat/dat.conf file:
ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd2 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
/etc/dat/dat.conf DAT static registry file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWudaplu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkgadd(1M), pkgrm(1M), libdat(3LIB), dat.conf(4), service_provider.conf(4). attributes(5)
18 Jun 2004 datadm(1M)
02-22-2017
)