Sorry if it isn't the right subforum I am using windows 7 before partitioning my mobile's (Samsung Galaxy S7) SD card I did backup to all folders that were installed on it.
Then I partitioned the SD card using the utility called "Mini Tool Partition" as per the snapshot below (SD card named as Disk2 not 1 and size is 32 GB)
I created 3 partitions as per some online recommendation and as below :
8 GB Fat32
16 GB Ext2
8 GB Swap
I wanted to copy the backup apps to partition named "Ext2" which utility will let me do that ?
So far I tried ext2explore and Ext2Fsd-0.68 with no joy
Hi,
I have a hard time to think of writing a tool or call its an API utility in order to migrate the data from an old-system (DB2) to a new-system (Oracle). I never do this before. There are many records in the old database DB2. I can't just map each of them to the new database by manually. ... (1 Reply)
Hi all,
I was installing linux, so i want to know the basic difference between /ext2 and /ext3 filetype..
what is the significance of using /ext2 and /ext3
pls clarify
Thanks
Vasikaran (2 Replies)
Hi,
I am a beginner. I need an example of using DB2 Load Utility in Shell script.
I appreciate if anyone could help me about it.
Thanks,
Paris (0 Replies)
HI
I have a messaging s/w daemon(TIBCO rvrd) provided by vendor which will accept connections from various clients and routes messages to the destinations. In order to route it internally uses two ports(one tcp adn one udp).
I want to know on which port(tcp/udp) it is transmitting... (3 Replies)
I need to find all the files that have group Read or Write permission or files that have user write permission.
This is what I have so far:
find . -exec ls -l {} \; | awk '/-...rw..w./ {print $1 " " $3 " " $4 " " $9}'
It shows me all files where group read = true, group write = true... (5 Replies)
Hi all,
I have a problem with some read/write functions.
I have a .bin file which contains a lot of structures as follows:
struct alumno
{
char id;
char apellido1;
char apellido2;
char nombre;
float nota1p;
float nota2p;
float notamedia;
char photofilename;
};
What I have... (3 Replies)
Hi,
We have smb client running on two of the linux boxes and smb server on another linux system. During a backup operation which uses smb, read of a file was allowed while write to the same file was going on.Also simultaneous writes to the same file were allowed.Following are the settings in the... (1 Reply)
HI
I need to implement a client/server TCP application. the customer is the client and the bartender is the server.
When the customer enter the Bar, client connects to the server
Server should reply the client immediately. Other wise if the server is busy, it should send an update message... (10 Replies)
Can someone help me to write this program in C in QNX?
Using the FIFO queues write a simple communication system consisting of programs write and read. The program write the parameters given strings enclosed in single quotes. These strings are written to the FIFO file. Reads the program read... (1 Reply)
Discussion started by: ebasse2
1 Replies
LEARN ABOUT REDHAT
dummy_cs
DUMMY_CS(4) Kernel Interfaces Manual DUMMY_CS(4)NAME
dummy_cs - PCMCIA dummy device driver
SYNOPSIS
insmod dummy_cs.o [pc_debug=n] [free_ports=n] [irq_list=i,j,...]
DESCRIPTION
The dummy_cs module has two purposes. It is intended as a demonstration of how to write the PCMCIA interface code for a client driver, and
the source code is heavily commented. It is also written to function as a sort of generic ``point enabler'': when bound to any PCMCIA IO
card, it will read the card's Configuration Information Structure, and configure the card appropriately. The configuration includes set-
ting up IO and memory windows, configuring the card for interrupts, and initializing the card's PCMCIA configuration registers.
It turns out that many cards report incomplete or inaccurate configuration information, due to vendor carelessness and the complexity of
the data format. A vendor driver can generally take for granted many configuration details, so there is not much incentive for vendors to
ensure that the on-card information is complete. Thus, the dummy_cs module is limited by its generality: since it makes no assumptions
about card types, it is forced to rely on the card information, for better or worse.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
free_ports=n
A flag indicating if the IO ports allocated for the card should be freed from the kernel resource maps. This is useful if the dummy
driver is being used to configure a card in preparation for loading a specific PCMCIA-unaware driver. The default is 0 (false).
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO cardmgr(8), pcmcia(5).
pcmcia-cs 2000/06/12 21:24:47 DUMMY_CS(4)