Hi Jim. I'd better give a bit more info. I'm generating a new listener file for a gateway from a script so I have to assign a port. There will be multiple listeners running on different ports on that same host. If I choose one that's already in use the new listener obviously won't start. The range I'll choose this from is not the important part, I'll simply stick to the default range defined for Oracle. I just need to know the best way to determine if the port I choose is in use already. Thanks.
---------- Post updated at 11:53 AM ---------- Previous update was at 10:42 AM ----------
So this should work, right? Or am I missing something?
/* Linux Slackware */
Nmap shows the following ports open on the gateway.
21/tcp ftp
22/tcp ssh
23/tcp telnet
25/tcp smtp
37/tcp time
80/tcp http
113/tcp auth
515/tcp printer
587/tcp submission
1024/tcp kdm
6000/tcp x11
-------------------------------
i would like to close as... (10 Replies)
Hello, i need a script (bash type maybe?..), which would check open ports on 127.0.0.1 and then compare open ports with "registered/allowed" port list and try to kill the program who uses unregistered ports. It would be great that script would be started lets say every 5 or 10 minutes.
You see i... (2 Replies)
Hello,
I have a number of Solaris 8 Sun servers that have open ports that I cannot identify. I see some with 1012-1020 (which are reserved ports according to the IANA. Lsof does not identify these. One server has all these on and one server just has 1017.
*.1023 ... (3 Replies)
Hello,
I have a number of Solaris 8 Sun servers that have open ports that I cannot identify. I see some with 1013-1023 (which are reserved ports according to the IANA. Lsof does not identify these. I rebooted the server and they went off, but this morning I saw they were all back on again. Any... (1 Reply)
My requirement is
I need to write a program in shell scripting to check 2 TCP unused unique port numbers in SOLARIS and I have to lock the same ports so that it will not be used in any other new process and the same port numbers should be used and locked in the LINUX machine to communicate... (2 Replies)
hi guys,
may i know the exact steps to open a port in solaris.i have some rough idea - which is adding the port number in /etc/services.
but i am not sure the correct conventions, steps or any other steps.
kindly advise.thanks guys ! (1 Reply)
We have a system and we have modified the /etc/ind.conf and the
/etc/services and the /etc/rc.tcpip file to turn off specific applications.
I need to know what is the correct procedure for locking down unused
ports that still appear to be in a listen mode even... (1 Reply)
Hello,
I have a file with multiple columns of which the first two columns are like
a1_144601_144650 ABC_yellow_144608_16785
a1_144651_144700 ABC_yellow_144608_16785
a1_144701_144751 ABC_yellow_144608_16785
So Based on column 1 (red values) I need to check if its falling in... (3 Replies)
Discussion started by: Diya123
3 Replies
LEARN ABOUT DEBIAN
ibv_srq_pingpong
IBV_SRQ_PINGPONG(1) USER COMMANDS IBV_SRQ_PINGPONG(1)NAME
ibv_srq_pingpong - simple InfiniBand shared receive queue test
SYNOPSIS
ibv_srq_pingpong [-p port] [-d device] [-i ib port] [-s size] [-q num QPs] [-r rx depth] [-n iters] [-l sl] [-e] HOSTNAME
ibv_srq_pingpong [-p port] [-d device] [-i ib port] [-s size] [-q num QPs] [-r rx depth] [-n iters] [-l sl] [-e]
DESCRIPTION
Run a simple ping-pong test over InfiniBand via the reliable connected (RC) transport, using multiple queue pairs (QPs) and a single shared
receive queue (SRQ).
OPTIONS -p, --port=PORT
use TCP port PORT for initial synchronization (default 18515)
-d, --ib-dev=DEVICE
use IB device DEVICE (default first device found)
-i, --ib-port=PORT
use IB port PORT (default port 1)
-s, --size=SIZE
ping-pong messages of size SIZE (default 4096)
-q, --num-qp=NUM
use NUM queue pairs for test (default 16)
-r, --rx-depth=DEPTH
post DEPTH receives at a time (default 1000)
-n, --iters=ITERS
perform ITERS message exchanges (default 1000)
-l, --sl=SL
use SL as the service level value of the QPs (default 0)
-e, --events
sleep while waiting for work completion events (default is to poll for completions)
SEE ALSO ibv_rc_pingpong(1), ibv_uc_pingpong(1), ibv_ud_pingpong(1)AUTHORS
Roland Dreier
<rolandd@cisco.com>
BUGS
The network synchronization between client and server instances is weak, and does not prevent incompatible options from being used on the
two instances. The method used for retrieving work completions is not strictly correct, and race conditions may cause failures on some
systems.
libibverbs August 30, 2005 IBV_SRQ_PINGPONG(1)