I unplugged both power cords and then plugged them again. Pushed Esc at boot and tried to Reset SC but it still keeps on asking login prompt :
Code:
ALOM BOOTMON v1.6.4
ALOM Build Release: 002
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake Did not get a boot protocol message.
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: R
,
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.4
ALOM Build Release: 002
Reset register: 00000000
Check for Handshake
Returned from Boot Monitor and Handshake
Loading the runtime image...
Sun(tm) Advanced Lights Out Manager 1.6.4 (vitalqip)
VxDiag not performed.
Please login:
SC Alert: SC System booted.
Every time I would try to send a break to my T2000 I would get this
Debugging requested; hardware watchdog suspended.
c)ontinue, s)ync, r)eset?
I couldn't get into OBP.
Here's what I found to do...
sc> bootmode
Bootmode: normal
sc> bootmode reset_nvram
sc> bootmode... (3 Replies)
Hi,
I have forgot the sc and console login password in sun v125 server,
can anyone suggest me how to reset sc password in sun v125 server.
Thanks
Rjs (3 Replies)
Hi guys,
I'm in trouble with a Sunfire T2000.
The OS (Solaris10) is up and running, but I can't log in the sc>I think the terminal server is crashed!
Does anyone know if I can reset the sc> from the OS?
How can I do that?
Thx (6 Replies)
Hi,
I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection.
... (0 Replies)
I have bought from eBay a second hand Sun Fire V210 server and I'm really stumped at the lack of complete instructions on how to connect to it.
I don't have a Windows machine, I've only got Ubuntu and OS X computers. None of them have an old RS-232 port on them either.
In saying that, I have... (12 Replies)
Hello.
I have a sun v245 and I have no hard drive for it yet but i would like to connect it to my home router by ethernet cable so I can use Alom remotely. Could someone please tell me how to set it up.
Thank You (1 Reply)
Hi all,
I made some calculations and it seems that fans are working more than they supposed to keep the internals at the specified values. Is there a way to adjust this ?
I have 2 approaches ;
-from ALOM sc|ok prompt
-from Solaris 10
or
-from a HW Switch
I am pretty sure that... (5 Replies)
Discussion started by: y33t
5 Replies
LEARN ABOUT MOJAVE
test::requires
Test::Requires(3) User Contributed Perl Documentation Test::Requires(3)NAME
Test::Requires - Checks to see if the module can be loaded
SYNOPSIS
# in your Makefile.PL
use inc::Module::Install;
test_requires 'Test::Requires';
# in your test
use Test::More tests => 10;
use Test::Requires {
'HTTP::MobileAttribute' => 0.01, # skip all if HTTP::MobileAttribute doesn't installed
};
isa_ok HTTP::MobileAttribute->new, 'HTTP::MobileAttribute::NonMobile';
# or
use Test::More tests => 10;
use Test::Requires qw(
HTTP::MobileAttribute
);
isa_ok HTTP::MobileAttribute->new, 'HTTP::MobileAttribute::NonMobile';
# or
use Test::More tests => 10;
use Test::Requires;
test_requires 'Some::Optional::Test::Required::Modules';
isa_ok HTTP::MobileAttribute->new, 'HTTP::MobileAttribute::NonMobile';
DESCRIPTION
Test::Requires checks to see if the module can be loaded.
If this fails rather than failing tests this skips all tests.
Test::Requires can also be used to require a minimum version of Perl:
use Test::Requires "5.010"; # quoting is necessary!!
# or
use Test::Requires "v5.10";
AUTHOR
Tokuhiro Matsuno <tokuhirom @*(#RJKLFHFSDLJF gmail.com>
THANKS TO
kazuho++ # some tricky stuff
miyagawa++ # original code from t/TestPlagger.pm
tomyhero++ # reported issue related older test::builder
tobyink++ # documented that Test::Requires "5.010" works
ENVIRONMENT
If the "RELEASE_TESTING" environment variable is true, then instead of skipping tests, Test::Requires bails out.
SEE ALSO
"TestPlagger.pm" in t
LICENSE
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.18.2 2017-10-06 Test::Requires(3)