Sponsored Content
Full Discussion: Help with ping6
Top Forums UNIX for Advanced & Expert Users Help with ping6 Post 302986179 by Meow613 on Tuesday 22nd of November 2016 12:06:20 PM
Old 11-22-2016
Scrutinizer -

Thanks.

Debian 8.5

---------- Post updated 11-22-16 at 12:11 AM ---------- Previous update was 11-21-16 at 12:22 PM ----------

I don't know, but if this helps...
Code:
root@server1:/home/server1# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:23:ae:27:b9:ec brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DORMANT group default qlen 1000
    link/ether 00:24:2c:49:d1:d8 brd ff:ff:ff:ff:ff:ff
root@server1:/home/server1# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    1024   0        0 wlan0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 wlan0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 wlan0

[COLOR="#738fbf"]---------- Post updated at 12:00 PM ---------- Previous update was at 12:11 AM ----------[/CO

---------- Post updated at 12:06 PM ---------- Previous update was at 12:00 PM ----------

Anybody elwse wish to chime in?
 

We Also Found This Discussion For You

1. UNIX for Beginners Questions & Answers

Help with ping6

Please help me with the inability to use ping6 root@server1:/home/server1# ifconfig eth0 Link encap:Ethernet HWaddr 00:23:ae:27:b9:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0... (1 Reply)
Discussion started by: Meow613
1 Replies
asadmin-restart-instance(1AS)					   User Commands				     asadmin-restart-instance(1AS)

NAME
asadmin-restart-instance, restart-instance - restarts the specified server instance and all the services associated with it SYNOPSIS
restart-instance [--user admin_user] [--password admin_password] [--host localhost] [--port 4848] [--local=false] [--domain domain_name] [--passwordfile filename] [--secure|-s]instance_name Use the restart-instance to restart the instance with the instance name specified. The restart-instance command can be run both locally and remotely. To restart remotely, the administration server must be running on the hostname and port number specified. The user authenticates using the password identified for the administration server. Additionally, the instance must already exist within the domain served by the administration server, and the instance must be running. The restart-instance command is not supported on Windows. OPTIONS
--user administrative user associated for the instance. --password administrative password corresponding to the administrative user. --host host name of the machine hosting the administrative instance. --port administrative port number associated with the administrative host. --local determines if the command should delegate the request to administrative instance or run locally. --domain name of the domain. --passwordfile file containing passwords appropriate for the command (e.g., administrative instance). --secure if true, uses SSL/TLS to communicate with the administrative instance. OPERANDS
instance_name name of the instance to be restarted. Example 1: Using restart-instance in local mode asadmin> restart-instance --local --domain domain1 server1 Instance server1 started Where: server1 is the name of the instance restarted on the domain1 domain. Example 2: Using restart-instance in remote mode asadmin> restart-instance --user admin --password adminadmin --host bluestar --port 4848 server1 Instance server1 started Where: server1 is the name of the instance restarted. The restarted instance is associated with the user, password, host, and port number specified. EXIT STATUS
0 command executed successfully 1 error in executing the command INTERFACE EQUIVALENT
Server Instance page asadmin-delete-instance(1AS), asadmin-start-instance(1AS), asadmin-create-instance(1AS), asadmin-stop-instance(1AS), asadmin-start- appserv(1AS), asadmin-stop-appserv(1AS), asadmin-start-domain(1AS), asadmin-stop-domain(1AS) J2EE 1.4 SDK March 2004 asadmin-restart-instance(1AS)
All times are GMT -4. The time now is 03:15 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy