Sponsored Content
Operating Systems Solaris Use 'dd' to copy boot disk to larger target disk Post 302983183 by sparcman on Friday 7th of October 2016 11:19:55 AM
Old 10-07-2016
Use 'dd' to copy boot disk to larger target disk

Hi,

I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger?

Code:
dd if=/dev/rdsk/device-name of=/dev/rdsk/device-name bs=block-size

Thanks for your help!

Last edited by rbatte1; 10-10-2016 at 06:22 AM.. Reason: Added CODE tags & removed bold in code line
 

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Upgrade Hard Disk to a larger one

Hello folks, I have a sun sparcstation 20, I would like to upgrade one of the hard disks to a larger one. The one I would like to upgrade only contains user data. Here are my thoughts: 1. Backup the specific file system 2. Replace the disk with the larger disk 3. Create a new file... (2 Replies)
Discussion started by: DLongan
2 Replies

2. UNIX for Dummies Questions & Answers

The hard disk at channel 2, target 1 had a soft error.

Hi there! I received the following error message The hard disk at channel 2, target 1 had a soft error. The output of a system check reveiled the following (see entry <2,1> ): SWXCR xcr0 error counters: RAID Array 200 Controller Family Information Utility V1.03... (1 Reply)
Discussion started by: Ivo
1 Replies

3. Solaris

Upgrading To Larger Disk?

I have just been assigned the task of upgrading to a larger disk on a e250; however, I am use to working on Linux and x86 hardware. I would be very appreciative if someone could inform me on how this procedure can be done safely. To begin with, the e250 has a 18 Gig primary scsi disk and a 18... (3 Replies)
Discussion started by: cstovall
3 Replies

4. Solaris

Controller target disk?

Hi, I am a newbie to Solaris. I want to know how to find out the controller target and disk number on a SunFire V890 box that has 6X72GB disks. The probe-scsi output is as shown below: /pci@8,600000/SUNW,qlc@2 LiD HA LUN --- Port WWN --- ----- Disk description ----- 0 0 0 ... (1 Reply)
Discussion started by: sudhir_shet
1 Replies

5. UNIX for Dummies Questions & Answers

How to find a file whick is consuming larger disk space in file system

Hello, Can anybody please tell me the command to find out the filesystem or a file which is consuming larger disk space sing i want to find out the file and want to compress it please help me out any help would be appreciated (6 Replies)
Discussion started by: lokeshpashine
6 Replies

6. AIX

Clone or mirror your AIX OS larger disk to smaller disk ?

hello folks, I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Discussion started by: filosophizer
9 Replies

7. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Discussion started by: gjackson123
0 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 07:21 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy