at the end of October i upgraded the distro to 8.10 at first it seemed fine until i restarted my machine the boot seqence started i logged in after that nothing? tried booting again and the same thing happened did i do something wrong during the upgrade to 8.10 did everything the computer asked me... (1 Reply)
Dear all,
I have created a KornShell script containing swiches with getopts (command line switches). Normally, my script should work like this:
$ ./myscript.ksh -a 12 -b 4 -c 78
The switch a was selected with the argument 12
The switch b was selected with the argument 4
The switch c was... (3 Replies)
When I try to speak to the microphone, there is no echo in the speaker. I test it again by dialing Skype, there is still no sound in my side while I can hear the other side.
What can I do?
Thanks in advance! (4 Replies)
Hi all,
I'm having a problem here my environment as follows.
AIX 5.3 TL 10 running on a P6 p520 sever with 3 fibre channel cards and Tivoli Storage Manager TSM 5.4 and TS3200 Tape Library with 2 drives and 2 media changers.
My problem as follows smc1 doesn't show up , I ran cfgmgr multiple... (6 Replies)
Hi all,
I have a problem here
root@host1 / # lsdev -Cc tape
rmt0 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
rmt1 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
smc0 Defined 07-00-02 IBM 3573 Tape Medium Changer (FCP)
root@host1 / # cfgmgr -l fcs2
Method error... (2 Replies)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfileThis code works well in... (1 Reply)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfile
This code... (1 Reply)
Hi,
My environement
OS: Linux Fedora Core 17 X86_64
KSH version: sh (AT&T Research) 93u+ 2012-08-01
As I understand inside a Kornshell script, the getopts statement allows to collect information about the switches provided for the script (if any). Besides, it is possible to... (3 Replies)
I have a Dell XPS M1330 laptop. The OS is Windows 10. I had to replace the motherboard because it was bad. After replacing the motherboard I noticed the optical (DVD/CD) drive is neither detected in BIOS and OS nor making any noise at all. Everything else seems to be working fine. The optical drive... (3 Replies)
Discussion started by: milhan
3 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)