We are intending to protect a set of user specified files using LVM mirroring where the protected space on which the user files are stored is mirrored on an LV on a different disk. Our problem is that for a user with a custom layout has installed linux with 2 partitons for swap and / and there is... (0 Replies)
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
Hello All, at our client VIOS Server there is shared ethernet adapter ent6,
when I run lsattr -El ent6 the output shows real adapter ent1 lsattr -El ent6
accounting disabled Enable per-client accounting of network statistics True
ctl_chan ent5 Control Channel... (2 Replies)
Hi
1- I want to create a cd or dvd of ubunto , that include a lot of installed packages entered by me .
2- automated installion (just enter the cd )and install by it self . (3 Replies)
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
I added in the configuration file of a whole root zone the following device match entries:
<device match="/dev/rmt/*"/>
<device match="/dev/sg/*"/>
after the reboot the zone was able to see all the devices of its global zone, and let under /dev/rmt and /dev/sg the special files created with... (1 Reply)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Hi,
I need to develop a bash script to create customized report from the server log (red hat 5.8 64 bit Operating system). The following is one of the log for our internal application task.
<2015.03.03 20:09:52 274 +0800><I><DSCTH01><http-0.0.0.0-443-2><security> GUI request succeeded for... (1 Reply)
Hi Guys,
this is the scenario:
ubuntu pc and I have 10 wireless devices that I need to check their firmware version.
I would like to create a script that it will ask me IP, after I enter it, I hit enter then it will show me the version of the firmware.
this is what i do.
ssh... (9 Replies)
Hello,
I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Discussion started by: amd103
4 Replies
LEARN ABOUT MINIX
mem
MEM(4) Linux Programmer's Manual MEM(4)NAME
mem, kmem, port - system memory, kernel memory and system ports
DESCRIPTION
/dev/mem is a character device file that is an image of the main memory of the computer. It may be used, for example, to examine (and even
patch) the system.
Byte addresses in /dev/mem are interpreted as physical memory addresses. References to nonexistent locations cause errors to be returned.
Examining and patching is likely to lead to unexpected results when read-only or write-only bits are present.
Since Linux 2.6.26, and depending on the architecture, the CONFIG_STRICT_DEVMEM kernel configuration option limits the areas which can be
accessed through this file. For example: on x86, RAM access is not allowed but accessing memory-mapped PCI regions is.
It is typically created by:
mknod -m 660 /dev/mem c 1 1
chown root:kmem /dev/mem
The file /dev/kmem is the same as /dev/mem, except that the kernel virtual memory rather than physical memory is accessed. Since Linux
2.6.26, this file is available only if the CONFIG_DEVKMEM kernel configuration option is enabled.
It is typically created by:
mknod -m 640 /dev/kmem c 1 2
chown root:kmem /dev/kmem
/dev/port is similar to /dev/mem, but the I/O ports are accessed.
It is typically created by:
mknod -m 660 /dev/port c 1 4
chown root:kmem /dev/port
FILES
/dev/mem
/dev/kmem
/dev/port
SEE ALSO chown(1), mknod(1), ioperm(2)COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2015-01-02 MEM(4)
09-26-2016
