Sunfire V880 Post: 302980924

10 More Discussions You Might Find Interesting

1. Solaris

X6799A PCI cards and Sunfire v880

Hi, Can X6799A PCI single fiber channel cards be fitted into the top 2 slots of a Sunfire v880. These 2 slots are 66Mhz and X6799A are supposed to be able to connect at this speed. However , I believe the cards are 5volts , whilst the slots are 3.3volts.

2. Solaris

KVM for V880's

We have 3 V880's and we need to purchase a KVM for them. I've never purchased one before. Does anyone have a recommendation for one?

3. Solaris

Sun V880

I have two mechine, one is SUN V880 and another is IBM p570. I run the same script on V880 and p570 , why the cpu usage always under 50% on V880 but the cpu usage can growth to 100% on p570.

4. UNIX for Advanced & Expert Users

V890 Benefits over V880

Hello, Need to know all benefits\differences for V890 over V880. We are really keen to know about this. Can anybody please take out some time and get us the information. Regards, Narinder

5. Solaris

Serial Port Connection to a Sunfire V880 (having Solaris 10)

Hi, I'mtrying to connect a Device via the serial port to my Solaris 10 environment (Sunfire V880). I have setup ttyb to connect to the Device. I am getting a connected status in my Port Listing (Using a separate Module that I have in the app running in the environment) but the moment I try to...

6. Solaris

Host ID of v880

Hello All, I am not a sun expert, but in my network administration job I had to deal with SUN servers. We've to replace a faulty motherboard of SF V880. As per my understanding, host id of machines is programmed in PROM. So will host ID be changed with the replacement of V880 motherboard?...

7. Solaris

V880 and T3 array issue

We're trying to install a third T3 array onto our V880. The other two T3's are connected to a qlogic fibre card. We can see this connection fine when we do a luxadm probe -p command. The full device paths are shown etc. ie: the first T3's logical name is c2t1d0 and the second one is c3t1d0. ...

8. Solaris

install solaris on v880

Hi everyone, i am totally new to unix i just purchase a sun v880, 16gb ram/8x900 cpu/6 73 gb hd. i want to learn unix/linux i have solaris 10 os instal, i turn on the system it finish check everything and right now i am at {7} ok, what do i do from there. any help would be a blessing from the...

9. Solaris

Sunfire V880 Internal Disk Problem

Any help on this would be greatly appreciated. I have read other threads on similar subject but still not clear on what this is telling me and what action to take. Do I have a couple of disks that are slowly dying? While checking disk usage on the V880 I noticed the following: # format...

10. Solaris

Attaching 1TB external drive to SunFire v880

Hi I have a 1TB external drive that I want to attach to a SunFire v880 server which runs on Solaris 9. After attaching the external drive what commands should I issue so that the drive will be seen by the server?

LEARN ABOUT DEBIAN

splitdns323fw

SPLITDNS323FW(1)						   User Commands						  SPLITDNS323FW(1)

NAME

       splitdns323fw - extract data from DNS-323 (and other) firmware images

SYNOPSIS

       splitdns323fw [-k KERNEL] [-i INITRD] [-d DEFAULTS] firmwarefile

DESCRIPTION

       splitdns323fw parses an existing firmware image for a device such as the D-Link DNS-323, DNS-321, and Conceptronics CH3SNAS.

       By default, if only the firmwarefile (R)option is given, the script verifies the checksums of the included components and prints a bunch of
       useful info about the image.  If you specify one or more of the other options, however, the corresponding section  of  the  firmware  image
       will be written to that file.

       -k kernel, --kernel=kernel

	      Write the kernel part of the firmware image to the specified file.

       -i initrd, --initrd=initrd

	      Write the initrd part of the firmware image to the specified file.

       -d defaults.tar.gz, --defaults=defaults.tar.gz

	      Write the defaults part of the firmware image to the specified file.

BUGS

       E-mail  bug  reports to theshed+dns323-firmware-tools@hezmatt.org.  I don't guarantee to be able to help, but I'll give it a shot.  Patches
       are far more helpful.

AUTHOR

       splitdns323fw was written by Matt Palmer, based on reverse-engineering work done by Leschinsky Oleg.

COPYRIGHT

       Copyright (C) 2008 Matt Palmer.
       This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
       LAR PURPOSE, to the extent permitted by law.

SEE ALSO

       mkimage(1), mkdns323fw(1).

dns323-firmware-tools 0.3					   November 2008						  SPLITDNS323FW(1)

10 More Discussions You Might Find Interesting

1. Solaris

X6799A PCI cards and Sunfire v880

Discussion started by: markdr011

2. Solaris

KVM for V880's

Discussion started by: dangral

3. Solaris

Sun V880

Discussion started by: golden

4. UNIX for Advanced & Expert Users

V890 Benefits over V880

Discussion started by: narinderd