These flags get added during next boot. As long as you see "u" flag for the new disk and no "UPPERCASE" flags (ie. WMDFSRB) present you are good with SVM.
Just ensure the
command executed after any disk change with the replaced device name. This command update the device relocation information. You can check this by running
and look for the last few lines of output
I'm running sun volume manager on solaris 9. I have two hotspares and
are currently on standby. Both are not being utilized.
Can I newfs both of them? Do I need to deleted the hostpares first,
then newfs?
hsp002: 2 hot spares
Device Status Length Reloc
... (3 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Hello friends,
I need to test some of the solaris 10 concepts and veritas volume manager.i want to know ,where i get the testing labs or E-labs(online) for this practice.i ready to pay for this labs.pls kindly help me to get the details or website names...Thanks in Advance
-Jay (6 Replies)
Hi All,
I have to do disk mirroring, for that I have to create a metadb as disk mirroring have to do with SVM. However I do not have any slice free for metadb.
What are the options? Please suggest (4 Replies)
Hello All,
I have small doubt. It's related to SVM in solaris 10. I have created raid 0 (striping) using 3 slices of 500 MB size (default interlace value as 32KB)
d2: Concat/Stripe ---- Interlace value is 32 KB
Size: 2923830 blocks (1.4 GB)
Stripe 0: (interlace: 64 blocks)
Device Start... (1 Reply)
Hi Friends,
I have to migrate my raid-1 volume to raid -5 online.
Can anyone please help me, If possible then send me the step by step commands for online migration.
Thanks in advance. (2 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hello Admins..
I am going through solaris volume manager guide for RAID-0 concatenation and stripes, I do not understand the concept of stripe from following example of concatenation.
There is an eample for concatenation:
# metainit d25 1 1 c0t1d0s2
d25: Concat/Stripe is setup
the... (5 Replies)
Discussion started by: snchaudhari2
5 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)