Is There a Method to Obtain EEPROM Info from SFP+ Post: 302977345

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

How to read EEPROM Locations

Dear Sir, I am Shidlingayya India, i am new to unix script..my problem is present-> I have to read the eeprom locations from 0 to 255 locations in separate file..i wrote the code for this as follows @eep_save_all ;<filename> store eeprom data to intel hex file kr 0,,02/n wf %1,...

2. UNIX for Advanced & Expert Users

Does admintool write to eeprom?

Hi: I was setting up a modem on an Ultra5 running 2.6. (yes I know, how quaint) There are 15 systems that are interlinked but not accessible to the outside world. This will end soon with new updated sun systems but until then the system needs to be accessed by the outside world. Hence the...

3. UNIX for Advanced & Expert Users

EEPROM password

hello i have sun machine and i need to reset EEPROM password where evrytime machine boot i should put password to start in booting any one can help me how i can remove this password Thanks

4. Solaris

doubt reg EEPROM

Hi , Am new to solaris can anyone tell me what is the use of setting the eeprom variable to true or false ...

5. UNIX for Dummies Questions & Answers

EEPROM CKSUM - Is there such thing?

Hi all, So I have a binary file and I need to generate an expected EEPROM checksum for it. Ideally, I would like to input the file (with the path) and output a computed checksum. Ive been using (cksum file1) with no avail and I was just curious as to whether there is such thing as EEPROM...

6. Shell Programming and Scripting

EEPROM CKSUM? what is this?

7. UNIX for Advanced & Expert Users

Transferring Eeprom to Virtual machine

Hello all, I am currently trying to find a solution to replacing some 10 year old Solaris boxes because it is obvious that they are going to fail soon. The problem is that they are license servers, and I need the eeprom serial to transfer to a new computer. Now, I could request that we get new...

8. UNIX for Dummies Questions & Answers

Get the eeprom dump using PCI bus address

Hi, I need to get an output that is the same as "ethtool -e eth0" But I need to use another method that does not use the eth port ID (ethX). Does anyone know of any method? Thanks!!

9. Shell Programming and Scripting

How to obtain info from whois?

Hello, do you know any clever way to get information whether certain domain name become avaialble for registration from bash script? Would be good to check for the availability like every 100miliseconds, i want to catch domain.

LEARN ABOUT DEBIAN

via-diag

VIA-DIAG(8)						      System Manager's Manual						       VIA-DIAG(8)

NAME

       via-diag - EEPROM setup and diagnostic program for the VIA Rhine vt86c100 and vt3043 Ethernet controller chips.

SYNOPSIS

       via-diag [options]

DESCRIPTION

       via-diag is a program that you can use to diagnose problems with VIA Rhine vt86c100 and vt3043 Ethernet controller chips.

OPTIONS

       These  programs	follow	the  usual  GNU  command  line	syntax, with long options starting with two dashes (`-').  A summary of options is
       included below.

       -h, --help
	      Show summary of options.

       -V, --version
	      Show version of program.

       -v, --verbose
	      Verbose mode.

       -q, --quiet
	      Be very unverbose.

       -# <cardnum>
	      Use card number <cardnum>.

       -a, --show_all_registers
	      Print all registers.

       -e, --show-eeprom
	      Dump EEPROM contents to stdout.

       -E, --emergency-rewrite
	      Re-write a corrupted EEPROM.

       -p, --base-address <port>
	      Specify port to use.

       -A, --Advertise <mediaype>
	      Advertise media type. Valid Options are: 10baseT, 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD, 10baseT-FD and 10baseHD.

       -F, --new-interface <interface>
	      Interface number. Options that make sense are: 10baseT, 10base2, AUI, 100baseTx, 10baseT-FDX, 100baseTx-FDX,  100baseT4,	100baseFx,
	      100baseFx-FDX, MII, HomePNA and Autosense.

       -H, --new-hwaddress <address>
	      Set card to a new hardware address.

       -m, --show-mii
	      Dump MII management registers.

       -R, --reset
	      Reset the transceiver.

       -T, --test
	      Do register and SRAM test.

       -w, --write-EEPROM <values>
	      Write to the EEPROMS with the specified values. Do not use this, if you do not know what you do!

       -f, --force-detection
	      Try to identify the card, even if it is active.

       -t, --chip-type <card>
	      Explicitly set the chip. To get all valid numbers, run via-diag with the options '-t -1'.

SEE ALSO

       mii-diag(8)

AUTHOR

       via-diag  was  written  and  is	still  maintained  by  Donald  Becker <becker@scyld.com>.  This manual page was written by Alain Schroeder
       <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).

								 February 18, 2002						       VIA-DIAG(8)