Hi you all, I have a BIG performance problem on an Sun E3500, the scenario is described below:
I have several users (30) accessing via samba to the E3500 using an application built on Visual Foxpro from their Windows PC , the problem is that the first guy that logs in demands 30% of the E3500... (2 Replies)
Hello,
i have a a1000 connected to an e6500. There's a raid 10 (12 disks) on the a1000.
If i do a
dd if=/dev/zero of=/mnt/1 bs=1024k count=1000
and then look at iostat it tells me there's a kw/s of 25000.
But if i do a
dd of=/dev/zero if=/mnt/1 bs=1024k count=1000
then i see only a... (1 Reply)
Hello,
I'm running a script on AIX to process lines in a file. I need to enclose the second column in quotation marks and write each line to a new file. I've come up with the following:
#!/bin/ksh
filename=$1
exec >> $filename.new
cat $filename | while read LINE
do
echo $LINE | awk... (2 Replies)
Hello all
We just built a storage cluster for our new xenserver farm. Using 3ware 9650SE raid controllers with 8 x 1TB WD sata disks in a raid 5, 256KB stripe size.
While making first performance test on the local storage server using dd (which simulates the read/write access to the disk... (1 Reply)
Hello,
we have a machine with Solaris Express 11, 2 LSI 9211 8i SAS 2 controllers (multipath to disks), multiport backplane, 16 Seagate Cheetah 15K RPM disks.
Each disk has a sequential performance of 220/230 MB/s and in fact if I do a
dd if=/dev/zero of=/dev/rdsk/<diskID_1> bs=1024k... (1 Reply)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)
Hi,
I am new registered user here in this UNIX forums.
I am a new system administrator for AIX 6.1. One of our servers performs poorly every time our application (FINACLE) runs many processes/instances. (see below for topas snapshot)
I use NMON or Topas to monitor the server utilization. I... (9 Replies)
Hi
We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g.
As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Just a quick note for macOS users.
I just installed (and removed) Parallels Desktop 15 Edition on my MacPro (2013) with 64GB memory and 12-cores, which is running the latest version of macOS Catalina as of this post. The reason for this install was to test some RIGOL test gear software which... (6 Replies)
Discussion started by: Neo
6 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)