IOSTAT(8)						    BSD System Manager's Manual 						 IOSTAT(8)

NAME

     iostat -- report I/O statistics

SYNOPSIS

     iostat [-CUdKIoT?] [-c count] [-n devs] [-w wait] [drives]

DESCRIPTION

     Iostat displays kernel I/O statistics on terminal, device and cpu operations.  The first statistics that are printed are averaged over the
     system uptime.  To get information about the current activity, a suitable wait time should be specified, so that the subsequent sets of
     printed statistics will be averaged over that time.

     The options are as follows:

     -?    Display a usage statement and exit.

     -C    Display CPU statistics.  This is on by default, unless -d is specified.

     -c    Repeat the display count times.  If no wait interval is specified, the default is 1 second.

     -d    Display only device statistics.  If this flag is turned on, only device statistics will be displayed, unless -C or -U or -T is also
	   specfied to enable the display of CPU, load average or TTY statistics.

     -I    Display total statstics for a given time period, rather than average statistics for each second during that time period.

     -K    In the blocks transferred display (-o), display block count in kilobytes rather then the device native block size.

     -n    Display up to devs number of devices.  iostat will display fewer devices if there aren't devs devices present.

     -o    Display old-style iostat device statistics.	Sectors per second, transfers per second, and miliseconds per seek are displayed.  If -I
	   is specified, total blocks/sectors, total transfers, and miliseconds per seek are displayed.

     -T    Display TTY statistics.  This is on by default, unless -d is specified.

     -U    Display system load averages.  This is on by default, unless -d is specified.

     -w    Pause wait seconds between each display.  If no repeat count is specified, the default is infinity.

     Iostat displays its information in the following format:

     tty
	   tin	   characters read from terminals
	   tout    characters written to terminals

     devices
	   Device operations.  The header of the field is the device name and unit number.  iostat will display as many devices as will fit in a
	   standard 80 column screen, or the maximum number of devices in the system, whichever is smaller.  If -n is specified on the command
	   line, iostat will display the smaller of the requested number of devices, and the maximum number of devices in the system.  To force
	   iostat to display specific drives, their names may be supplied on the command line.	iostat will not display more devices than will fit
	   in an 80 column screen, unless the -n argument is given on the command line to specify a maximum number of devices to display, or the
	   list of specified devices exceeds 80 columns.  If fewer devices are specified on the command line than will fit in an 80 column screen,
	   iostat will show only the specified devices.

	   The standard iostat device display shows the following statistics:

	   KB/t    kilobytes per transfer
	   tps	   transfers per second
	   MB/s    megabytes per second

	   The standard iostat device display, with the -I flag specified, shows the following statistics:

	   KB/t    kilobytes per transfer
	   xfrs    total number of transfers
	   MB	   total number of megabytes transferred

	   The old-style iostat display (using -o) shows the following statistics:

	   sps	   sectors transferred per second
	   tps	   transfers per second
	   msps    average milliseconds per transaction

	   The old-style iostat display, with the -I flag specified, shows the following statistics:

	   blk	   total blocks/sectors transferred
	   xfr	   total transfers
	   msps    average milliseconds per transaction

     cpu
	   us	   % of cpu time in user mode
	   sy	   % of cpu time in system mode
	   id	   % of cpu time in idle mode

EXAMPLES

	   iostat -w 1 disk0 disk2

     Display statistics for the first and third disk devices device every second ad infinitum.

	   iostat -c 2

     Display the statistics for the first four devices in the system twice, with a one second display interval.

	   iostat -Iw 3

     Display total statistics every three seconds ad infinitum.

	   iostat -odICTw 2 -c 9

     Display total statistics using the old-style output format 9 times, with a two second interval between each measurement/display.  The -d flag
     generally disables the TTY and CPU displays, but since the -T and -C flags are given, the TTY and CPU displays will be displayed.

SEE ALSO

     fstat(1), netstat(1), nfsstat(1), ps(1), pstat(8)

     The sections starting with ``Interpreting system activity'' in Installing and Operating 4.3BSD.

HISTORY

     This version of iostat first appeared in FreeBSD 3.0.

BSD
								September 27, 2001							       BSD