Sponsored Content
Operating Systems Solaris Solaris 9 x86 check disk mirror status Post 302973586 by frustrated1 on Thursday 19th of May 2016 04:06:38 AM
Old 05-19-2016
Solaris 9 x86 check disk mirror status

We have Proliant DL380 G2 running Solaris 9 x86
There are 6 physical disks installed which I believe are mirrored at hardware level to 3 sets to present 3 disks to the OS.

Is there any way to check the mirror status at OS level ?
I am guessing not and it may need a trip to site as we have no ilom access remotely but hoping someone has a different answer Smilie


Solaris 9 8/03 s9x_u4wos_08b x86

Code:
# df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c1t0d0s0      9.6G   6.5G   3.0G    69%    /
/proc                    0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
fd                       0K     0K     0K     0%    /dev/fd
swap                   940M   148K   939M     1%    /var/run
swap                   952M    13M   939M     2%    /tmp
/dev/dsk/c1t0d0s4      3.8G    37M   3.8G     1%    /users
/dev/dsk/c1t1d0s3      7.9G   3.1G   4.7G    40%    /logs
/dev/dsk/c1t2d0s3      9.9G   7.7G   2.1G    79%    /scratch1
/dev/dsk/c1t2d0s0       49G    27G    22G    56%    /opt/mysql/



Code:
# format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <DEFAULT cyl 4342 alt 2 hd 255 sec 32>
          /pci@0,0/pcie11,4080@1/sd@0,0
       1. c1t1d0 <DEFAULT cyl 4424 alt 2 hd 255 sec 63>
          /pci@0,0/pcie11,4080@1/sd@1,0
       2. c1t2d0 <DEFAULT cyl 8851 alt 2 hd 255 sec 63>
          /pci@0,0/pcie11,4080@1/sd@2,0



Moderator's Comments:
Mod Comment Please use code tags as required by forum rules!

Last edited by RudiC; 05-19-2016 at 05:49 AM.. Reason: Added code tags.
 

10 More Discussions You Might Find Interesting

1. Solaris

Disk devices in solaris 10 x86

I'm trying to mirror 2 eide disks on a solaris 10 x86 system. Im trying to use the prtvtoc | fmthard command to mirror the vtoc. How do they represent the entire disk like in solaris 9 (c0t0d0s2 = entire device) 0. c0d0 <DEFAULT cyl 26497 alt 2 hd 16 sec 63> ... (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies

2. Solaris

Disk Mirror in Solaris 9 via Solaris Volume Manager

Hello, I am trying to do mirror in solaris 9. I have total 0-7 disks 4 5 6 7 0 1 2 3 Drive 0 and Drive 4 = Boot Drives Need to Mirror following drives. Drive 1 and Drive 5 = Need to mirror Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5. Then i... (3 Replies)
Discussion started by: deal732
3 Replies

3. Solaris

Solaris 10 - breaking of mirror and change new hard disk

Hi, am a newbie at solaris. Need advice and help on this. 1) How do I break the mirror between 2 hard disks. (wish to keep 1 good hard disk as backup) 2) After remove 1 hard disk and put in new hard disk, how do I initialise or fomat the new hard disk? 3) How do I put back the backup... (3 Replies)
Discussion started by: chongkls77
3 Replies

4. Solaris

Disk Mirroring for Solaris 10 x86

I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the... (2 Replies)
Discussion started by: chuck43
2 Replies

5. Solaris

x86 Sun Machine and Solaris Soft Mirror

Hi everyone, Normally it always easier in Sparc machine, i can set or manually use the boot-device in NVram to boot the mirrored disk. However I have a big trouble about x86 mirror for a long time. I have been doing anything i can: search document, google, ask the others. Recently i did as... (5 Replies)
Discussion started by: tien86
5 Replies

6. Solaris

How to create mirror disk in solaris machine?

hi, I'm newbie in Solaris 10. can someone explain me the steps of how to create mirror disk in Solaris machine. thanks in advance (5 Replies)
Discussion started by: Wong_Cilacap
5 Replies

7. Solaris

Create a boot disk mirror on Solaris 10 x86

I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Discussion started by: TKD
6 Replies

8. Solaris

Solaris patching using mirror disk backup? need help!

hi friends, need help.. it is my first time patching using mirror disk backup approach, not so sure about the steps :confused: how do you detach, patch it, boot it and reattach it ? any kind soul here can advise ? thanks in advance..:) below is the information from my machine: Filesystem ... (3 Replies)
Discussion started by: Exposure
3 Replies

9. Solaris

Unable to boot from mirror disk on x86 server configured under VxVM

Hi, Can you help me on booting x86 server configured under VxVM. Server boots fine normally from both the disks but if I try to boot server from mirror disk without starting veritas, then it does not boot. vxplex -g rootdg dis var-02 vxplex -g rootdg dis swapvol-02 vxplex -g rootdg dis... (2 Replies)
Discussion started by: milindphanse604
2 Replies

10. Solaris

Solaris x86 extend disk

hi all! i extend disk on SPARC solaris without problems, but with x86 Solaris 10 i have some troubles . Help pls iostat show me updated disk size, but in format i can't choose Auto configure options to use modified slice # iostat -E c0d1 cmdk1 Soft Errors: 0 Hard Errors: 0 Transport... (4 Replies)
Discussion started by: ijj
4 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 03:26 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy