Sponsored Content
Operating Systems AIX Setup 1 Digi PortServer II with 5 x AIX boxes Post 302973130 by richardsantink on Saturday 14th of May 2016 10:23:49 PM
Old 05-14-2016
IBM Setup 1 Digi PortServer II with 5 x AIX boxes

Hi everyone,
My latest challenge sees me assisting with the setup of one of our classroom labs.

We are trying to configure the lab so that the (5) IBM 9115-505 servers (all running AIX7.1) have their serial 0 ports connected to a Digi PortServer II, which is on the classroom LAN, along with the students' laptops. The hope is that the students can Telnet to the PS II (192.168.2.200:xxxx) where xxxx is the port for each serial port on the PortServer.

After reading the Digi documentation (I have no prior experience with the Digi products), I'm finding the initial setup very confusing, and I have been so far unsuccessful.

I've seen mention of RealPort drivers, but I don't think that's the issue because we would need to access these *before* the servers are powered on (to access ASMI).

On the PortServer II, I have the 5 ports we will use as follows:
Baud: 19200 (to appease AIX.. Smilie
Data/Parity/Stop/Flow: 8N1-Hardware

Additionally, each one is configured with ports 2001-2005.

I'm thinking it might have something to do with the cabling, so I've been referring to one of the guides from Digi which talks about the pinouts. Does anyone know if a standard roll-over cable with an RJ-45-to DB9 works?

EDIT: I should have noted earlier, that the students' laptops are all Windows-based; only the servers are AIX.

I know I may not have included all the relevant information, but I'm not even sure if I'm asking the right questions!

Thanks for any insight or direction..

Cheers,

R
 

10 More Discussions You Might Find Interesting

1. Programming

text boxes, radio buttons , check boxes in c++ on unix

Hi ! Please tell me how to get radio buttons, text boxes , check boxes , option buttons , pull down menus in C++ on Unix. I think it would be done using curses.h ..but that's all i know. TIA, Devyani. (3 Replies)
Discussion started by: devy8
3 Replies

2. AIX

setup of 2 gateways on AIX

Please, anybody help on resolving the following problem? I have 2 netwotks ( 10.0.0.0 and 10.0.11.0 ) on 2 different areas I need both networks to telnet the corresponding ethernet card. This is a prblem because AIX is configured with a default gateway. Please advice how to assign 2... (2 Replies)
Discussion started by: mynikolas
2 Replies

3. AIX

Print server setup on AIX

Hi, I'm very new to AIX, I have to setup a D-Link print server with HP Laserjet 1300 printer on AIX, any body can guide me thru simple steps to acheive this, like how to install print server, driver and then which services i have to restart after adding the print server all this kind of stuff. ... (1 Reply)
Discussion started by: patras
1 Replies

4. AIX

Routing setup - AIX

Hi All, I know there is a way to do this in routers. The question is whether it is posisble to do this in AIX. For our Web Focus ODBC connection to the Disaster Recovery servers, we want to restrict the access to the ODBC ports so that only the IP address of the Web Focus server can get to... (1 Reply)
Discussion started by: strunz
1 Replies

5. AIX

Capturing Process on AIX boxes - IMP

Guys we all know what command 'COLUMNS=2047 /usr/bin/ps –eo pid,ppid,uid,user,args' does.It prints 5-column output for the running processes on a AIX box. Here is simple thing i need: I need to insert this tabular data in a db2 table. How do i need? I have created table with these five... (0 Replies)
Discussion started by: ak835
0 Replies

6. AIX

mail setup in AIX

Hi All, We are using IBM AIX. I have to send an automated mail from unix. For which i tried mail -s "test message" <mail id> It didn't give me any error message. but i didn't get any mail. On checking mail command, i see the below details. Final-Recipient: RFC822;... (3 Replies)
Discussion started by: mjdarm
3 Replies

7. AIX

Daily checks for AIX business critical boxes.

Hi all, I will like to know what are all sanitary checks which should be done on daily basis on all business critical AIX boxes without fail. (7 Replies)
Discussion started by: deepm
7 Replies

8. SCO

Migrating Digi PortServer TS 16

Hi I am migrating from SCO 5.05 to SCO 6. The SCO 5.05 is on old hardware. I have installed SCO 6.0 on a new Dell server. I am manualy migrating the users, printer config and profiles. When I finsh migrating I plan to switch the IP address from the old server to new server, and shut... (2 Replies)
Discussion started by: atish0
2 Replies

9. AIX

AIX GPFS Setup

:cool:Hello, can someone guide me how to create a GPFS filesystem, I've read a couple of redbooks however certain things are still not certain, like if you require to download files or licenses... any help would be appreciated! (2 Replies)
Discussion started by: ollie01
2 Replies

10. UNIX for Beginners Questions & Answers

New to AIX: How do I setup high availability on an AIX System

I am new to AIX but not new to unix. I have an interview for an AIX systems admin position and I know they want someone who has knowledge of High Availability, Failover and LPARs From my research so far, It appear powerha is used to setup high availability and failover on Power systems but is... (2 Replies)
Discussion started by: mathisecure
2 Replies
PUC(4)							   BSD Kernel Interfaces Manual 						    PUC(4)

NAME
puc -- PCI ``universal'' communications card driver SYNOPSIS
puc* at pci? dev ? function ? com* at puc? port ? lpt* at puc? port ? DESCRIPTION
The puc driver provides support for PCI communications cards containing simple communications ports, such as NS16550-family (com) serial ports and standard PC-like (lpt) parallel ports. The driver is called ``universal'' because the interfaces to these devices aren't nearly as well defined and standard as they should be. The driver currently supports the following cards: ADDI-DATA APCI-7800 (8 port serial) Actiontec 56K PCI Master Advantech PCI-1604UP (2 port serial) Advantech PCI-1610 (4 port serial) Advantech PCI-1612 (4 port serial) Advantech PCI-1620 (8 port serial) Avlab Low Profile PCI 4S Quartet (4 port serial) Avlab Low Profile PCI 4 Serial (4 port serial) Avlab PCI 2S (2 port serial) Boca Research Turbo Serial 654 (4 port serial) Boca Research Turbo Serial 658 (8 port serial) Chase Research / Perle PCI-FAST4 (4 port serial) Chase Research / Perle PCI-FAST8 (8 port serial) Comtrol RocketPort 550/4 series (4 port serial) Comtrol RocketPort 550/8 series (8 port serial) Comtrol RocketPort 550/16 series (16 port serial) Decision Computer Inc PCCOM PCI 2 Port (2 port serial) Decision Computer Inc PCCOM PCI 4 Port (4 port serial) Decision Computer Inc PCCOM PCI 8 Port (8 port serial) Digi International Digi Neo 4 (4 port serial) Digi International Digi Neo 8 (8 port serial) Dolphin Peripherals 4014 (dual parallel) Dolphin Peripherals 4035 (dual serial) Dolphin Peripherals 4036 (dual serial) EXAR XR17D152 (2 port serial) EXAR XR17D154 (4 port serial) EXAR XR17D158 (8 port serial) Exsys EX-41098 (4 port serial) IBM 4810 SurePOS 300 Series SCC (4 port serial) InnoSys Keyspan SX Pro (4 port serial) Intel chipset internal Serial over LAN I-O DATA RSA-PCI (2 port serial) I-O DATA RSA-PCI2 (2 port serial) I-O DATA RSA-PCI2/P4 (4 port serial) I-O DATA RSA-PCI2/P8 (8 port serial) Lava Computers 2SP-PCI (single parallel) Lava Computers Octopus (8 port serial) Lava Computers Quatro-PCI (4 port serial) Lava Computers dual serial Lava Computers SSERIAL-PCI (single serial) Middle Digital, Inc. Weasel serial port Moxa Technologies SmartIO C104H/PCI (4 port serial) Moxa Technologies SmartIO C168EL-A/PCIe (8 port serial) Moxa Technologies SmartIO C168EL/PCIe (8 port serial) Moxa Technologies SmartIO C168H/PCI (8 port serial) Moxa Technologies SmartIO C168U/PCI (8 port serial) Moxa Technologies SmartIO CP-114/PCI (4 port serial) Moxa Technologies SmartIO CP-102/PCI (2 port serial) Moxa Technologies SmartIO CP-104-EL/PCIe (4 port serial) Moxa Technologies SmartIO CP-104-V2/PCI (4 port serial) Moxa Technologies SmartIO CP-104/PCI (4 port serial) Multi-Tech ISI5634PCI/4 (4 port serial) NEC PK-UG-X001 K56flex PCI Modem NEC PK-UG-X008 NetMos 1P PCI (single parallel) NetMos 2S1P PCI 16C650 (dual serial and single parallel) NetMos 4S1P PCI NM9845 (4 port serial and single parallel) NetMos NM9805 1284 (single parallel) NetMos NM9815 Dual 1284 (dual parallel) NetMos NM9835 series (up to dual serial and single parallel) NetMos NM9845 series (up to 6 serial and 1 parallel) NetMos NM9865 series (up to 4 serial and 2 parallel) NetMos NM9901 PCIe (1 serial or 1 parallel) NetMos NM9904 PCIe (4 port serial) NetMos NM9922 PCIe (2 port serial) Oxford Semiconductor OX16PCI952 (dual serial and single parallel) Oxford Semiconductor OX16PCI954 (4 port serial) Oxford Semiconductor OX16PCI958 (8 port serial) Oxford Semiconductor OXPCIe952 (2 port serial, legacy mode) Oxford Semiconductor OXmPCI952 (2 port serial) Perle Systems PCI-RAS 4 modem ports Perle Systems PCI-RAS 8 modem ports Perle Systems PCI-RASV92 4 modem ports Perle Systems PCI-RASV92 8 modem ports SIIG Cyber 2P1S PCI series (dual parallel and single serial) SIIG Cyber 2S1P PCI series (dual serial and single parallel) SIIG Cyber 4 PCI 16550 (4 port serial) SIIG Cyber 4S PCI series (quad serial) SIIG Cyber I/O PCI series (single serial and single parallel) SIIG Cyber Parallel Dual PCI series (dual parallel) SIIG Cyber Parallel PCI series (single parallel) SIIG Cyber Serial Dual PCI series (dual serial) SIIG Cyber Serial PCI series (single serial) SIIG PS8000 PCI 8S series (8 port serial) SUNIX 400x (1 port parallel) SUNIX 401x (2 port parallel) SUNIX 402x (1 port serial) SUNIX 403x (2 port serial) SUNIX 405x (4 port serial) SUNIX 406x (8 port serial) SUNIX 407x (2 port serial and 1 port parallel) SUNIX 408x (2 port serial and 2 port parallel) SUNIX 409x (4 port serial and 2 port parallel) SUNIX 5008 (1 port parallel) SUNIX 5016 (8 port serial) SUNIX 5027 (1 port serial) SUNIX 5037 (2 port serial) SUNIX 5056 (4 port serial) SUNIX 5066 (8 port serial) SUNIX 5069 (1 port serial and 1 port parallel) SUNIX 5079 (2 port serial and 1 port parallel) SUNIX 5099 (4 port serial and 1 port parallel) Syba Tech Ltd. PCI-4S Syba Tech Ltd. PCI-4S2P-550-ECP SystemBase SB16C1054PCI (4 port serial) SystemBase SB16C1058PCI (8 port serial) US Robotics (3Com) 3CP5609 PCI 16550 Modem VScom PCI-010HV2 (1 port parallel) VScom PCI-010L (1 port parallel) VScom PCI-011H (1 port parallel) VScom PCI-100H (1 port serial) VScom PCI-100L (1 port serial) VScom PCI-110L (1 port serial and 1 port parallel) VScom PCI-200 (dual serial) VScom PCI-200H (dual serial) VScom PCI-200HV2 (dual serial) VScom PCI-200L (dual serial) VScom PCI-200Li (dual serial) VScom PCI-210L (2 port serial and 1 port parallel) VScom PCI-400 (4 port serial) VScom PCI-400L (4 port serial) VScom PCI-800 (8 port serial) VScom PCI-800H (8 port serial) VScom PCI-800L (8 port serial) The driver does not support the cards: Dolphin Peripherals 4006 (single parallel) Dolphin Peripherals 4025 (single serial) Dolphin Peripherals 4078 (dual serial and single parallel) but support for them (and for similar cards) should be trivial to add. The port locator is used to identify the port (starting from 0) on the communications card that a subdevice is supposed to attach to. Typi- cally, the numbering of ports is explained in a card's hardware documentation, and the port numbers used by the driver are the same as (or one off from, e.g. the manual uses ports numbered starting from 1) those described in the documentation. SEE ALSO
com(4), lpt(4), pci(4) HISTORY
The puc driver appeared in NetBSD 1.4. AUTHORS
The puc driver was written by Chris Demetriou. BUGS
The current design of this driver keeps any com ports on these cards from easily being used as console. Of course, because boards with those are PCI boards, they also suffer from dynamic address assignment, which also means that they can't easily be used as console. Some of the cards supported by this driver have jumper-selectable com port clock multipliers, which are unsupported by this driver. Those can be easily accommodated with driver flags, or by using a properly scaled baud rate when talking to the card. Some of the cards supported by this driver, e.g. the VScom PCI-800, have software-selectable com port clock multipliers, which are unsup- ported by this driver. Those can be accommodated using internal driver flags, or by using a properly scaled baud rate when talking to the card. Some ports use an lpt driver other than the machine-independent driver. Those ports will not be able to use lpt ports attached to puc devices. BSD
October 26, 2012 BSD
All times are GMT -4. The time now is 05:19 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy