04-25-2016
Looks like you have to go and see on the server if there are no flashing led on the drive also, and take a cleaning tape with you I think it needs a feew passes of cleaning tape...
did you try offl option of mt to kick the tape out? As I suspect it will not give you back the tape... But if it works - quick give a clean, and check the drive, and be prepared to call HP support...
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
/dev/rmt/0: No such device or address
I get this when I do a "mt -f /dev/rmt/0 rewind"
This is on a Solaris 7 system.
I tried
devfsadm -c tape
and
drvconfig ; tape
and both didn't work.
Help please....... :confused: (4 Replies)
Discussion started by: shorty
4 Replies
2. UNIX for Dummies Questions & Answers
Hello guys,
on my Red Hat machine the /bin/mt status command gives the output dev/tape: inappropriate ioctl for device. This messages comes up after the Server has been rebooted.
Anybody an idea?
Thx
masterofdesaster (8 Replies)
Discussion started by: masterofdesaste
8 Replies
3. UNIX Desktop Questions & Answers
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (0 Replies)
Discussion started by: blianna
0 Replies
4. UNIX and Linux Applications
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (1 Reply)
Discussion started by: blianna
1 Replies
5. SuSE
Dear all,
we are running SLES 11 where an iscsi tape library is
attached. To load the tape in a slot we are using for
instance the command #mtx -f /dev/sg1 load 2 which is doing
very well.
But after a server's reboot the device name of the loader is now
/dev/sg4 or /dev/sg5 I mean it is... (1 Reply)
Discussion started by: xunil321
1 Replies
6. Solaris
I have an HP Proliant DL380 with Intel Processors that I recently loaded Solaris 10 with latest patches on it. I'm trying to do a ufsdump to an HP DAT 40 tape drive via SCSI, but I can't get it to do anything because /dev/rmt is empty. I've tried the following with luck:
touch /reconfigure,... (7 Replies)
Discussion started by: cvaughn
7 Replies
7. Hardware
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (1 Reply)
Discussion started by: vickyingle5
1 Replies
8. Solaris
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (5 Replies)
Discussion started by: vickyingle5
5 Replies
9. Hardware
hello to everybody
I have Ubuntu Lucid 10.04 installed on my Desktop and I have a PCI serial card in my computer and it has only one serial port.
Actually I want to use this serial port for the serial communication and for that I executed this command :
$ setserial -g /dev/ttyS
and I... (0 Replies)
Discussion started by: piyush011
0 Replies
10. UNIX for Advanced & Expert Users
Is there a trick to mounting swap in n a lvm? I can't get it to work.
# swapon -va
swapon on /dev/mapper/VG-lv_swap
swapon: /dev/mapper/VG-lv_swap: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/mapper/VG-lv_swap: pagesize=4096, swapsize=4294967296,... (1 Reply)
Discussion started by: cokedude
1 Replies
LEARN ABOUT CENTOS
amtape
AMTAPE(8) System Administration Commands AMTAPE(8)
NAME
amtape - Control Amanda changers
SYNOPSIS
amtape [-o configoption...] config subcommand [subcommand_options...]
DESCRIPTION
Amtape is the command-line interface to Amanda's tape changers (amanda-changers(7)) and to the taperscan algorithm (amanda-taperscan(7)).
Tape changers maintain a notion of the current slot for each configuration. This may or may not correspond to an actual physical state of
the device, but is used by some taperscan algorithms to minimize searching through the slots.
Amtape uses the default changer. To use a different changer, use the config override option, e.g., -otpchanger=otherchanger.
SUBCOMMANDS
label label
Search for and load the Amanda tape with label [label], also setting the current slot.
slot slot
Load the volume in the given slot, also setting the current slot. The slot names current, next, first, and last have special meaning.
current
Shorthand for slot current.
inventory
Show the contents of all slots, based on the changer's cached metadata. This is a quick operation as it does not load or unload any
volumes, but is not supported by all changers.
show [slots]
Show the contents of all slots (or listed slots) by loading each slot and reading its label. This can be very slow. The slots arguments
is of the form 1,3-5,7.
reset
Reset the changer to a known state. This subcommand is intended to clear any unknown and potentially incorrect state the changer may
have stored.
eject [drive]
Eject the tape currently in the drive. This only applies to some changers. Specify a drive (by drive number) if more than one drive is
available.
clean [drive]
If a cleaning tape is defined for the changer, used it to clean the specified drive. The [drive] is optional if the changer only has
one drive.
taper
Run the taperscan algorithm (see amanda-taperscan(7)), displaying information about the progress of the scan.
update [what]
Update changer state. Consult amanda-changers(7) for changer-specific details on the format of what.
-o configoption
See the "CONFIGURATION OVERRIDE" section in amanda(8).
SEE ALSO
amanda(8), amanda-changers(7), amanda-taperscan(7), amanda-devices(7)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORS
Dustin J. Mitchell <dustin@zmanda.com>
Zmanda, Inc. (http://www.zmanda.com)
James da Silva <jds@amanda.org>
Stefan G. Weichinger <sgw@amanda.org>
Amanda 3.3.3 01/10/2013 AMTAPE(8)