Unsupported hardware detected error for SSD hard drive Post: 302970709

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

3. Solaris

Hard Drive error

I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is...

4. Solaris

Netra 240 Hard disk are not detected

Hi All, I have new Netra 240 box which is not detecting its harddisk equiped with itse same har disk are detected when I swap with another machine. Same time If I swap hardisk of other machine to this Netra 240 box, also do not work. I have checked chassis, cabling etc and all looks fine. ...

5. Solaris

Hard Error:DAT Tape Drive

Well I have just added new tape drive to my server (lto) However I am getting few errors in using it. I have checked status with #iostat -En : giving me few hard errors, few soft errors and execution error. Also tape status is not visible as "no sense" its coming as "no additional sense". I...

6. Solaris

USB drive not being detected -ehci1

Hi All, I am trying to get SanDisk 16GB usb drive to be read by my x4270 Solaris10 server, but I get the below error when I plug it in: root@server1>rmformat -l Looking for devices... No removables found. root@server1> root@server1>dmesg | tail Apr 28 16:02:52 server1 genunix: ...

7. Solaris

solaris hard disk not detected

Dear all, I have a Sol 10 server. When I put df -h , it is showing the mount points of all file systems, but when I format the server it is showing the below output bash-3.00# format Searching for disks...done No disks found! Pl let me know what is the problem for this. ...

8. Solaris

Jumpstart Error: Unsupported version (3.0).

Hello, The OS version of the ZFS flar is Solaris 10 U9 . Here is the screen output from my attempted jumpstart: System identification is completed. System identification complete. Starting Solaris installation program... Searching for JumpStart directory... Using rules.ok from...

9. HP-UX

Need Hardware help on a RP4440 that lost the RTC and does not see both hard drives

Since the lost of the rtc all the settings became default. Does anyone remember what needs to be reset to discover both Hard drives? It sees the DVD and the scsi disk (intscsib.0) in 0/1/1/1.0 (disk 1 slot) but not 0/1/1/0.1 (intscsia.1)(disk 0 slot). Right now, from the service menu, scsi shows...

LEARN ABOUT CENTOS

pmdavmware

PMDAVMWARE(1)						       Performance Co-Pilot						     PMDAVMWARE(1)

NAME

       pmdavmware - VMware performance metrics domain agent (PMDA)

DESCRIPTION

       pmdavmware is a Performance Metrics Domain Agent (PMDA) which exports metric values from a (possibly remote) VMware virtualisation host.

       This implementation uses the VMare Perl API (refer to the online docs at http://www.vmware.com/support/developer/viperltoolkit).  VIPerl is
       a prerequisite for this PMDA, it needs to be installed and configured before attempting to use this agent.  It is highly recommended that
       you test your VIPerl installation using the demo programs that are shipped with VIPerl, before attempting to use this PMDA.

INSTALLATION

       In order to access performance data using the VIPerl API, it is necessary to be able to login to the metrics source.  Hence, a valid VMware
       server name, user name and pass word are needed by the PMDA.  These can be passed in on the command line (via the pmcd.conf file) or via a
       vmware.conf file in the PMDA directory.

	       # cd $PCP_PMDAS_DIR/vmware
	       # [ edit vmware.conf ]

       This file should contain three lines, such as:

	       $server = 'vm.server.net';
	       $username = 'XXXX';
	       $password  = 'YYYY';

       Once this is setup, you can access the names and values for the vmware performance metrics by doing the following as root:

	       # cd $PCP_PMDAS_DIR/vmware
	       # ./Install

       If you want to undo the installation, do the following as root:

	       # cd $PCP_PMDAS_DIR/vmware
	       # ./Remove

       pmdavmware is launched by pmcd(1) and should never be executed directly.  The Install and Remove scripts notify pmcd(1) when the agent is
       installed or removed.

FILES

       $PCP_PMDAS_DIR/vmware/vmware.conf
	   configuration file for the pmdavmware agent

       $PCP_PMDAS_DIR/vmware/Install
	   installation script for the pmdavmware agent

       $PCP_PMDAS_DIR/vmware/Remove
	   undo installation script for the pmdavmware agent

       $PCP_LOG_DIR/pmcd/vmware.log
	   default log file for error messages from pmdavmware

SEE ALSO

       pmcd(1).

3.8.10							       Performance Co-Pilot						     PMDAVMWARE(1)