:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is... (5 Replies)
Hi All,
I have new Netra 240 box which is not detecting its harddisk equiped with itse same har disk are detected when I swap with another machine.
Same time If I swap hardisk of other machine to this Netra 240 box, also do not work. I have checked chassis, cabling etc and all looks fine. ... (1 Reply)
Well I have just added new tape drive to my server (lto)
However I am getting few errors in using it. I have checked status with
#iostat -En : giving me few hard errors, few soft errors and execution error.
Also tape status is not visible as "no sense" its coming as "no additional sense".
I... (5 Replies)
Hi All,
I am trying to get SanDisk 16GB usb drive to be read by my x4270 Solaris10 server, but I get the below error when I plug it in:
root@server1>rmformat -l
Looking for devices...
No removables found.
root@server1>
root@server1>dmesg | tail
Apr 28 16:02:52 server1 genunix: ... (0 Replies)
Dear all,
I have a Sol 10 server.
When I put df -h , it is showing the mount points of all file systems,
but when I format the server it is showing the below output
bash-3.00# format
Searching for disks...done
No disks found!
Pl let me know what is the problem for this.
... (5 Replies)
Hello,
The OS version of the ZFS flar is Solaris 10 U9 .
Here is the screen output from my attempted jumpstart:
System identification is completed.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from... (5 Replies)
Since the lost of the rtc all the settings became default. Does anyone remember what needs to be reset to discover both Hard drives? It sees the DVD and the scsi disk (intscsib.0) in 0/1/1/1.0 (disk 1 slot) but not 0/1/1/0.1 (intscsia.1)(disk 0 slot).
Right now, from the service menu, scsi shows... (3 Replies)
Discussion started by: mrmurdock
3 Replies
LEARN ABOUT SUSE
grub-install.unsupported
GRUB-INSTALL(8) FSF GRUB-INSTALL(8)NAME
grub-install - install GRUB on your drive
SYNOPSIS
grub-install [OPTION] install_device
DESCRIPTION
Install GRUB on your drive.
-h, --help
print this message and exit
-v, --version
print the version information and exit
--root-directory=DIR
install GRUB images under the directory DIR instead of the root directory
--grub-shell=FILE
use FILE as the grub shell
--no-floppy
do not probe any floppy drive
--force-lba
force GRUB to use LBA mode even for a buggy BIOS
--recheck
probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by --root-directory, and uses the grub shell to install grub into the
boot sector.
The grub source distribution carries this script to ease the installation of grub as a boot loader. In Suse Linux however, grub installa-
tion is much better handled by Yast; use of this script is generally discouraged and therefore unsupported. Consequently, the script has
been renamed to grub-install.unsupported.
In order to (re-)install grub for the currently running system, simply use Yast. For an installation aiming at a differing system, the
crafting of an appropriate device.map and grub shell script is strongly advised, e.g. "grub --batch --device-map=target-device.map < tar-
get-grub.conf"
SEE ALSO
The full documentation for grub-install is maintained as a Texinfo manual. If the info and grub-install programs are properly installed at
your site, the command
info grub-install
should give you access to the complete manual.
grub-install (GNU GRUB 0.97) May 2005 GRUB-INSTALL(8)