I have vmware on my windows PC ( hostname : acer ).
vmware has RHEL 7 ( hostname : rhel7 ) installed recently.
RHEL IP configuration
IP : 192.168.5.128
Netmask : 255.255.255.0
ssh to rhel7 works from acer using putty
resolve.conf
host file of acer has the entry
192.168.5.1 acer
ping to acer from rhel 7 does not work.
Hello
I believe that 192.168.5.1 is your Acer windows PC, and there is no DNS server on it, which are you relies to.
You'll need to set some other DNS server for your Linux server in resolf.conf, for example 8.8.8.8 (Google DNS server).
If you need to be able ping your Acer PC by name from Linux server, you can add this line at /etc/hosts:
I think that you might need to improve your knowledge about DNS a little, this article can help a bit.
Last edited by imort; 04-06-2016 at 02:23 PM..
Reason: Forgot to add a link to article about DNS records
I'm nearly finished my program i've got everything in place and than when i run it it comes back with the reply mv: command not found. This is the code that seems to be causing the problem.
elif
then
echo "There are more than one '$1' files in the system."
echo "Please... (2 Replies)
Hi.
I just installed the HP-UX 11i V2.
I have problems with CDE - it is inoperative (after logon there is a message box: messaging system failure - or something like that, it asks to check /etc/hosts and network settings).
nslookup works by hostname and IP, hostname shown the correct... (7 Replies)
hi folks,
i've got a blank hp visualize C3000 workstation and installed HP-UX 11.11. When I want to start X, I get the following error message:
# X
Fatal server error:
Couldn't open X pointer device! Is one attached?
I've connected an mouse and a keyboard with an usb/ps2 connector.... (5 Replies)
Hi All,
My current setup is:
1x Windows Server (Windows 2000 server)
1x Unix Server
2x Windows machine
3x Unix Terminals (Hostnames = A, B and C)
Problem
The problem iam having is Unix terminal C cannot be ping across by Unix terminal A or B or Unix server by using the hostname. Unix... (1 Reply)
I recently installed Solaris 10 on my Sun workstation. I cannot ping using hostname from another computer on the same network.
But I can ping using the IP address. Also I can ping other systems using their hostnames.
Can anyone give some information regarding how to resolve this issue. (4 Replies)
Hello everyone
I have a partition with a problem with ping.
If I do a ping by ip for example ping 1.1.1.1 I got no problem but If I ping by hostname for example ping partition1 take almost a minute to respond me.
I have Aix 5.3 and I have another 19 partitions with no problem. The only... (5 Replies)
anyone ever seen this problem:
I can ping the server by IP address but I can't by hostname.
nslookup is working and dns query is ok.
# nslookup mwxnsb24
Server: 10.11.49.206
Address: 10.11.49.206#53
Name: mwxnsb24
Address: 10.10.58.175
# ping... (8 Replies)
Hi.
Here is beginning of my script
#!/usr/local/bin/expect --
set timeout 15
spawn /usr/local/account.sh -n modify
expect "Password:" {send "mypassword\r"}
But due to some terminal control sequences (or something else, dunno exactly) my password prompt is looking like this:
and expect... (3 Replies)
Hello, Unix-forums!
My problem:
read -p "Enter any number, please" number
sleep 1
echo $number | tr -d 0-9
test -z $number && echo "Thank you" || echo "This is not a number"Test always displays "This is not a number". It doesn't matter if I entered a or 1.
But if I order
echo... (2 Replies)
Discussion started by: intelinside
2 Replies
LEARN ABOUT FREEBSD
nos-tun
NOS-TUN(8) BSD System Manager's Manual NOS-TUN(8)NAME
nos-tun -- implement ``nos'' or ``ka9q'' style IP over IP tunnel
SYNOPSIS
nos-tun -t tunnel -s source -d destination -p protocol_number [source] target
DESCRIPTION
The nos-tun utility is used to establish an nos style tunnel, (also known as ka9q or IP-IP tunnel) using a tun(4) kernel interface.
Tunnel is the name of the tunnel device /dev/tun0 for example.
Source and destination are the addresses used on the tunnel device. If you configure the tunnel against a cisco router, use a netmask of
``255.255.255.252'' on the cisco. This is because the tunnel is a point-to-point interface in the FreeBSD end, a concept cisco does not
really implement.
Protocol number sets tunnel mode. Original KA9Q NOS uses 94 but many people use 4 on the worldwide backbone of ampr.org.
Target is the address of the remote tunnel device, this must match the source address set on the remote end.
EXAMPLES
This end, a FreeBSD box on address 192.168.59.34:
nos-tun -t /dev/tun0 -s 192.168.61.1 -d 192.168.61.2 192.168.56.45
Remote cisco on address 192.168.56.45:
interface tunnel 0
ip address 192.168.61.2 255.255.255.252
tunnel mode nos
tunnel destination 192.168.59.34
tunnel source 192.168.56.45
AUTHORS
Nickolay N. Dudorov <nnd@itfs.nsk.su> wrote the program, Poul-Henning Kamp <phk@FreeBSD.org> wrote the man-page. Isao SEKI
<iseki@gongon.com> added a new flag, IP protocol number.
BUGS
We do not allow for setting our source address for multihomed machines.
BSD April 11, 1998 BSD