Number to bit vector Post: 302967887

6 More Discussions You Might Find Interesting

1. Programming

copying or concatinating string from 1st bit, leaving 0th bit

Hello, If i have 2 strings str1 and str2, i would like to copy/concatenate str2 to str1, from 1st bit leaving the 0th bit. How do i do it?

2. Shell Programming and Scripting

Help needed in converting number to bit

Hi, I have the following file input:- 542 4795 61 543 4795 61 544 0 0 545 292 ...

3. Programming

Help with bit vector and setting its bits?

void shuffle (card_t cards, card_t cards2, char *bitvec) { int i; unsigned char temp, r; srand(time(NULL)); for (i = 0; i < 52; i++) { r = rand() % 52; temp = bitvec; if (!(temp & (1 << (8- (r % 8))))) { temp |= (1 << (8- (r % 8)));------->is this my problem? } } } ok so I am...

4. Shell Programming and Scripting

How to handle 64 bit arithmetic operation at 32 bit compiled perl interpreter?H

Hi, Here is the issue. From the program snippet I have Base: 0x1800000000, Size: 0x3FFE7FFFFFFFF which are of 40 and 56 bits. SO I used use bignum to do the math but summing them up I always failed having correct result. perl interpreter info, perl, v5.8.8 built for...

5. Programming

How bit representation of a number can be done in c?

I have an assignment in which a character is the input of which some bits(from a position to certain position) are to be inverted (1's complement) and then the resultant character is to be returned....for example unsigned char x = J from p = 3 to offset n = 5 01001010 inverted to...

6. Windows & DOS: Issues & Discussions

Which version of Windows Vista to install with a product key? 32-bit or 64-bit?

Hello everyone. I bought a dell laptop (XPS M1330) online which came without a hard drive. There is a Windows Vista Ultimate OEMAct sticker with product key at the bottom case. I checked dell website (here) for this model and it says this model supports both 32 and 64-bit version of Windows...

LEARN ABOUT MOJAVE

vtysh

VTYSH(1)                                                          Version 0.96.5                                                          VTYSH(1)

NAME

       vtysh - a integrated shell for Quagga routing software

SYNOPSIS

       vtysh [ -b ]
       vtysh [ -E ] [ -d daemon ] ] [ -c command ]

DESCRIPTION

       vtysh is a integrated shell for Quagga routing engine.

OPTIONS

       Options available for the vtysh command:

       -b, --boot
              Execute  boot  startup configuration. It makes sense only if integrated config file is in use (not default in Quagga). See Info file
              Quagga for more info.

       -c, --command command
              Specify command to be executed under batch mode. It behaves like -c option in any other shell - command is executed and vtysh exits.

              It's useful for gathering info from Quagga routing software or reconfiguring daemons from inside shell scripts, etc.  Note that mul-
              tiple commands may be executed by using more than one -c option and/or embedding linefeed characters inside the command string.

       -d, --daemon daemon_name
              Specify  which  daemon to connect to.  By default, vtysh attempts to connect to all Quagga daemons running on the system.  With this
              flag, one can specify a single daemon to connect to instead.  For example, specifying '-d ospfd' will connect only to  ospfd.   This
              can be particularly useful inside scripts with -c where the command is targeted for a single daemon.

       -e, --execute command
              Alias  for  -c.  It's  here  only  for  compatibility with Zebra routing software and older Quagga versions. This will be removed in
              future.

       -E, --echo
              When the -c option is being used, this flag will cause the standard vtysh prompt and command to be echoed prior  to  displaying  the
              results.  This is particularly useful to separate the results when executing multiple commands.

       -h, --help
              Display a usage message on standard output and exit.

ENVIRONMENT VARIABLES

       VTYSH_PAGER
              This should be the name of the pager to use. Default is more.

FILES

       /usr/local/etc/vtysh.conf
              The default location of the vtysh config file.

       /usr/local/etc/Quagga.conf
              The default location of the integrated Quagga routing engine config file if integrated config file is in use (not default).

WARNING

       This man page is intended to be a quick reference for command line options. The definitive document is the Info file Quagga.

SEE ALSO

       bgpd(8), ripd(8), ripngd(8), ospfd(8), ospf6d(8), isisd(8), zebra(8)

BUGS

       vtysh eats bugs for breakfast. If you have food for the maintainers try http://bugzilla.quagga.net

AUTHORS

       See http://www.zebra.org and http://www.quagga.net or the Info file for an accurate list of authors.

Quagga VTY shell                                                   27 July 2006                                                           VTYSH(1)