12-09-2015
From Diags screen, I only see the SAS RAID Adapter and Services Device. Do I suppose to see 2 SAS disks listed here. And Hit F7 to "commit" but it does not do anything :-(
+ sissas0 0 P1-C14-T1 PCIe3 x8 SAS RAID Internal Adapter 6Gb
+ ses0 P2-Y1 - SAS Enclosure Services Device
+ cd0 1 P2-D15 1 SATA DVD-RAM Drive
I will try to find other hard drive to replace it. But do I need to create RAID or it can bypass the RAID?
Thanks.
10 More Discussions You Might Find Interesting
1. AIX
Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed.
Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another..
cheers
Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies
2. AIX
Hello everybody, had a question.
Iam having a p650 box here, System Model: IBM,7038-6M2
Machine Serial Number: 1078DCC
managed system - 1 which has 2 lpars on it
i added memory to the box(made sure that memory added was in proper quads and was verified by a CE)
after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies
3. AIX
Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But... (5 Replies)
Discussion started by: filosophizer
5 Replies
4. AIX
I started the AIX install with a fiber channel disk, and let it run:
restricted by GSA ADP Schedule Contract with IBM Corp.
. . . . . << End of copyright notice for perfagent.tools >>. . . .
... (2 Replies)
Discussion started by: Gideon1a
2 Replies
5. AIX
Hello All,
Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies
6. AIX
Read "Migration to POWER8" article to get prepared for migration to POWER8:
link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies
7. AIX
Hello,
Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine.
Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX.
Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
8. AIX
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
9. AIX
Hi There,
First of all I'm new to *nix world, so bear with me and English is not my native tongue :)
Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation)
I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies
10. AIX
wasn't quite sure which forum to post in.
What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
MPII(4) BSD Kernel Interfaces Manual MPII(4)
NAME
mpii -- LSI Logic Fusion-MPT Message Passing Interface II
SYNOPSIS
mpii* at pci? dev ? function ?
DESCRIPTION
The mpii driver provides support for storage controllers using the LSI Logic Fusion-MPT Message Passing Interface II family of chipsets:
- LSISAS2004, LSISAS2008
These chipsets can be found on the following controllers:
- Dell PERC H200
- LSI SAS 9200-8e, SAS 9211-4i, SAS 9211-8i
Some models of these controllers have varying degrees of support for RAID 0 and RAID 1.
mpii supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.
EVENTS
The mpii driver is able to send events to powerd(8) if a logical drive in the controller is not online. The state-changed event will be sent
to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO
intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)
HISTORY
The mpii driver first appeared in OpenBSD 4.7.
AUTHORS
The mpii driver was written by James Giannoules and Mike Belopuhov.
BUGS
The chips supported by mpii do not use a SCSI-like identifier. Instead they use an opaque ID and leave discovery order up to the operating
system. The code to handle this is currently not implemented and therefore it is not a good idea to run this driver on a multi-boot machine
or with more than 1 drive.
BSD
April 19, 2012 BSD