12-09-2015
From Diags screen, I only see the SAS RAID Adapter and Services Device. Do I suppose to see 2 SAS disks listed here. And Hit F7 to "commit" but it does not do anything :-(
+ sissas0 0 P1-C14-T1 PCIe3 x8 SAS RAID Internal Adapter 6Gb
+ ses0 P2-Y1 - SAS Enclosure Services Device
+ cd0 1 P2-D15 1 SATA DVD-RAM Drive
I will try to find other hard drive to replace it. But do I need to create RAID or it can bypass the RAID?
Thanks.
10 More Discussions You Might Find Interesting
1. AIX
Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed.
Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another..
cheers
Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies
2. AIX
Hello everybody, had a question.
Iam having a p650 box here, System Model: IBM,7038-6M2
Machine Serial Number: 1078DCC
managed system - 1 which has 2 lpars on it
i added memory to the box(made sure that memory added was in proper quads and was verified by a CE)
after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies
3. AIX
Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But... (5 Replies)
Discussion started by: filosophizer
5 Replies
4. AIX
I started the AIX install with a fiber channel disk, and let it run:
restricted by GSA ADP Schedule Contract with IBM Corp.
. . . . . << End of copyright notice for perfagent.tools >>. . . .
... (2 Replies)
Discussion started by: Gideon1a
2 Replies
5. AIX
Hello All,
Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies
6. AIX
Read "Migration to POWER8" article to get prepared for migration to POWER8:
link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies
7. AIX
Hello,
Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine.
Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX.
Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
8. AIX
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
9. AIX
Hi There,
First of all I'm new to *nix world, so bear with me and English is not my native tongue :)
Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation)
I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies
10. AIX
wasn't quite sure which forum to post in.
What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
AAC(4) BSD Kernel Interfaces Manual AAC(4)
NAME
aac -- Adaptec AdvancedRAID Controller driver
SYNOPSIS
aac* at pci? dev ? function ?
ld* at aac? unit ?
DESCRIPTION
The aac driver provides support for the Adaptec AAC family of SCSI and SATA RAID controllers. These controllers support RAID 0, 1, 5, 10,
and volume sets. They have four channels in the add-in version or 1-2 channels in the motherboard integrated version, and are most often
found rebadged by Dell, Hewlett-Packard or IBM. Supported controllers include:
o Adaptec AAC-364
o Adaptec SCSI RAID 2120S
o Adaptec SCSI RAID 2200S
o Adaptec SATA RAID 2410SA
o Adaptec SATA RAID 3405
o Adaptec SCSI RAID 5400S
o Dell PERC 2/Si
o Dell PERC 2/QC
o Dell PERC 3/Di
o Dell PERC 3/Si
o Dell PERC 320/DC
o Dell CERC SATA RAID 1.5/6ch
o HP NetRAID 4M
o HP ML110 G2 (Adaptec SATA RAID 2610SA)
o IBM ServeRAID 8k
Access to RAID containers is available via the ld device driver. Individual drives cannot be accessed unless they are part of a container or
volume set, and non-fixed disks cannot be accessed. Containers can be configured by using the on-board BIOS utility of the card.
DIAGNOSTICS
The adapter can send status and alert messages asynchronously to the driver. These messages are printed on the system console.
SEE ALSO
intro(4), ld(4)
HISTORY
The aac driver first appeared in NetBSD 1.6, and was based on the FreeBSD driver of the same name.
BUGS
This driver is not compatible with controllers that have version 1.x firmware. The firmware version is the same as the kernel version
printed in the BIOS POST and driver attach messages.
BSD
February 19, 2011 BSD