10-01-2015
You used the word RAID in your subject line, but since you only speak of one disk in the post itself, I am going to assume that you have a single SCSI disk.
Here are some approaches you might take.
1. Corner the market for 9,18,and 33gb scsi disks. You can use disk duplication programs like hdclone to make a copy of your current disk, although you will not be able to change the logical size of the disk. That is, if you copy your 9gb disk to a 33gb disk, when you install the 33gb disk it will still appear to be 9. Put several of these on the shelf, and if the disk fails, install a replacement, and restore the latest tape. Cost 100-200$US per disk.
2. Toss the tape drive, and install a DVD writer. Purchase Microlite Edge, and do backups of the entire system to dvd. This software also allows you to create a bootable cd/dvd with a menu driven restore procedure. Cost 600US$
3. Upgrade the entire system to a new I3 processor with 4gb memory and 32gb SSD with DVD and backup to either USB or DVD and SCO 6.0.0. Cost less than 5k (hardware, software and installation.)
This User Gave Thanks to jgt For This Post:
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than... (1 Reply)
Discussion started by: pko60
1 Replies
2. Filesystems, Disks and Memory
Hi,
I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690.
When the RAID is attached, it boots up and says the following:
Controller Bus #00, Device#1F, Function#02: 00 Ports
No device found
AHCI BIOS not... (0 Replies)
Discussion started by: user23
0 Replies
3. Red Hat
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Discussion started by: amir07
1 Replies
4. UNIX for Dummies Questions & Answers
I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years.
I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd... (2 Replies)
Discussion started by: pcmacd
2 Replies
5. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
6. Hardware
Hi guys.
if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies
7. Linux
I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it.
The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically.
I installed Windows first to see if... (2 Replies)
Discussion started by: lorewap3
2 Replies
8. Filesystems, Disks and Memory
First time poster and a very new Unix user, so I'll just pre-apologize for stupid questions now.
Does anybody know of a good RAID 1 hard drive backup that is Unix friendly? I want to avoid any hardcore programming. Can you recommend both NAS and non-NAS options? I need to do nightly backups... (31 Replies)
Discussion started by: c.wakeman
31 Replies
9. Hardware
We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the... (0 Replies)
Discussion started by: Krendoshazin
0 Replies
LEARN ABOUT DEBIAN
backup_addhost
BACKUP_ADDHOST(8) AFS Command Reference BACKUP_ADDHOST(8)
NAME
backup_addhost - Adds a Tape Coordinator entry to the Backup Database
SYNOPSIS
backup addhost -tapehost <tape machine name>
[-portoffset <TC port offset>]
[-localauth] [-cell <cell name>] [-help]
backup addh -t <tape machine name>
[-p <TC port offset>]
[-l] [-c <cell name>] [-h]
DESCRIPTION
The backup addhost command creates a Tape Coordinator entry in the Backup Database. The entry records
o The host name of the Tape Coordinator machine where the Tape Coordinator (butc) process runs, as specified with the -tapehost argument.
o The Tape Coordinator's port offset number, as specified with the -portoffset argument. An entry for the port offset must also appear in
the /var/lib/openafs/backup/tapeconfig file on the Tape Coordinator machine, where it is mapped to a UNIX device name (for a tape
device) or pathname (for a backup data file).
Each Tape Coordinator must have its own port offset number, and the command fails if a Backup Database entry already exists for the
requested port offset number. To display existing Tape Coordinator entries, use the backup listhosts command.
OPTIONS
-tapehost <tape machine name>
Specifies the fully-qualified hostname of the machine for which to create a Tape Coordinator entry in the Backup Database. The machine
must have an entry in either the cell's naming service (such as the Domain Name Service) or the host file (/etc/hosts or equivalent) on
the machine where the command is issued.
-portoffset <TC port offset>
Specifies the Tape Coordinator's port offset number. Provide an integer from the range 0 through 58510, or omit this argument to use
the default value of 0 (zero). The value must match the port offset number recorded for the same combination of Tape Coordinator and
tape device or file in the /var/lib/openafs/backup/tapeconfig file on the Tape Coordinator machine named by the -tapehost argument.
-localauth
Constructs a server ticket using a key from the local /etc/openafs/server/KeyFile file. The backup command interpreter presents it to
the Backup Server, Volume Server and VL Server during mutual authentication. Do not combine this flag with the -cell argument. For more
details, see backup(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see backup(8).
-help
Prints the online help for this command. All other valid options are ignored.
EXAMPLES
The following command creates an entry in the Backup Database that assigns port offset number 4 to a Tape Coordinator running on the
machine "backup1.abc.com":
% backup addhost -tapehost backup1.abc.com -portoffset 4
The following command creates a Backup Database entry that assigns port offset number 0 to a Tape Coordinator on the machine
"backup3.abc.com":
% backup addhost backup3.abc.com
PRIVILEGE REQUIRED
The issuer must be listed in the /etc/openafs/server/UserList file on every machine where the Backup Server is running, or must be logged
onto a server machine as the local superuser "root" if the -localauth flag is included.
SEE ALSO
backup(8), backup_delhost(8), backup_listhosts(8)
COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas
Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2012-03-26 BACKUP_ADDHOST(8)