Sponsored Content
Operating Systems Linux Ubuntu Scan and create file systems in new LUNs Post 302956364 by Peasant on Tuesday 29th of September 2015 07:56:30 AM
Old 09-29-2015
Have you checked the messages log after issuing lip ?
Messages there should give you some clue what is going on.

There is no need for it btw, this is how you rescan, but lip will also work (this is mostly used when new storage is added to machine)
Code:
echo "- - -" > /sys/class/fc_host/hostN/scan

Where N is the number you know from previous output.

Are you using multipath ?
You should not use those devices directly (/dev/sd....) but their multipath name (/dev/mapper/...) or else you risk if one card dies multipath will not work.

Check out this document :
https://help.ubuntu.com/lts/servergu...h-devices.html
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies

2. Shell Programming and Scripting

File Scan

Hi everyone , i m working on Sun solaris and i have a file "smsapp.cur" which has information like this paragraph given below , there are millions of such paragraphs From:923212802736 To:923222326807 logMessage: 07-04-08 17:34:29 Getting message topup from code page default in language English... (2 Replies)
Discussion started by: Dastard
2 Replies

3. Solaris

how to create luns in A1000

hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below.. Set serial port parameters to: �... (1 Reply)
Discussion started by: tv.praveenkumar
1 Replies

4. Shell Programming and Scripting

Log File Scan

I need to read the last line of a log file and save it, sleep for X minutes and read the last line again. If the line is the same, exit 1, otherwise sleep for X minutes until the last line contains 'Status: Process completed'. Can anyone offer advice here? Thanks. (2 Replies)
Discussion started by: mode09
2 Replies

5. Red Hat

Scan For new LUNS

In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices. Can someone please tell me what file needs to be update in Redhat Linux 5 for the same. Second part of the question is WWN for HBA's can be found (atleast in my... (1 Reply)
Discussion started by: Tirmazi
1 Replies

6. Shell Programming and Scripting

Help with create multiple directories under diff file systems

Hi, Need help ...I want to create multiple directories in different /file systems using for loop..eg.../ORCL_data01/oradata/orcl/ctl. ../ORCL_data01/oradata/orcl/data. ../ORCL_data01/oradata/orcl/redo. Script :- ========= for dir in `ls -d... (8 Replies)
Discussion started by: Linux6.5
8 Replies

7. Red Hat

Scan for new LUN and create a new file system

Hi Please I dont have a lot of redhat skills, but I need some help on creating a file system. I need to rescan for this new LUN, so I try to check existing LUNs: fdisk -l Disk /dev/sda: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders Units = cylinders of... (8 Replies)
Discussion started by: fretagi
8 Replies

8. Solaris

How to scan for LUNs in SunOS sun4v sparc?

Hi everyone, We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue. SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v Update: -------- I... (9 Replies)
Discussion started by: babinlonston
9 Replies

9. Shell Programming and Scripting

Scan directories and create a list of files

Gents, Please can you help. I want to create a list which contends the complete patch of the location of some directories with the size of each file. need to select only .txt file In this case I am try to find the subdirectories tp1 and tp2 and create the output list. jd175-1 tp1... (3 Replies)
Discussion started by: jiam912
3 Replies

10. Shell Programming and Scripting

Create automated scan of specific directory using bash

I am trying to use bash to automate the scan of a specific directory using clamav. Having this in place is a network requirement. The below is an attempt to: 1. count the extensions (.txt, .jpeg) in a directory and write them to a virus-scan.log (section in bold) 2. scan each folder in the... (6 Replies)
Discussion started by: cmccabe
6 Replies
GERMINATE-PKG-DIFF(1)					  Ubuntu General Commands Manual				     GERMINATE-PKG-DIFF(1)

NAME
germinate-pkg-diff -- compare seeds against currently installed packages SYNOPSIS
germinate-pkg-diff [-l file] [-m {i|r|d}] [-a arch] [seeds] DESCRIPTION
germinate-pkg-diff compares the expansion of a list of seed packages against the set of packages installed on the current system. When con- structing seeds for a software distribution, it can be used to iteratively find packages installed on developers' systems that should be included in the seeds. A list of seeds against which to compare may be supplied as non-option arguments. Seeds from which they inherit will be added automatically. The default is 'desktop'. OPTIONS
-l, --list file Read the list of currently installed packages from file. The default is to read the output of dpkg --get-selections, and any supplied file should be in the same format. -m, --mode {i|r|d} Set the output mode as follows: i Show the dpkg selections needed to install just these seeds. List unseeded but installed files as ``deinstall'', and seeded but uninstalled files as ``install''. r List unseeded but installed files as ``install'', and seeded but uninstalled files as ``deinstall''. d Show the differences between the packages specified by the seeds and the list of installed packages, in a somewhat diff-like for- mat. -S, --seed-source source,... Fetch seeds from the specified sources. The default is http://people.canonical.com/~ubuntu-archive/seeds/. -s, --seed-dist dist Fetch seeds for distribution dist. The default is ubuntu.precise. -d, --dist dist,... Operate on the specified distributions. The default is precise. Listing multiple distributions may be useful, for example, when exam- ining both a released distribution and its security updates. -a, --arch arch Operate on architecture arch. The default is i386. BUGS
--mode r is useless as dpkg --set-selections input. AUTHORS
Lamont Jones <lamont@ubuntu.com> Colin Watson <cjwatson@canonical.com> germinate-pkg-diff is copyright (C) 2004, 2005, 2006, 2007, 2008 Canonical Ltd. See the GNU General Public License version 2 or later for copying conditions. A copy of the GNU General Public License is available in /usr/share/common-licenses/GPL. Ubuntu Jul 18, 2007 Ubuntu
All times are GMT -4. The time now is 06:13 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy