i have to repartition some of my filesystems ...
I have just one HDD ....
df -k gives this :-
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 830107 45532 726468 6% /
/dev/dsk/c0t0d0s1 1987399 785728 1142050 41% /usr
/proc ... (1 Reply)
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hello Team i have a file with following data (as columns).
I need implement a syntax like below for altering table
ALTER TABLE1 TABLENAME
ADD COLUMN COL1 CHAR(5) NOT NULL WITH DEFAULT
ADD COLUMN COL2 CHAR(5)
..
..
ADD COLUMN COLn CHAR(5) NOT NULL... (1 Reply)
HI all,
I am confused when I am seeing the output of bdf command ioscan -fnC disk, there is no same files which i have seen in bdf output and ioscan output...One volume was mounted in one folder called /teldb and device file path was /dev/disk/disk48. The same i didnt found in ioscan disk... (6 Replies)
Hi I am a newbie here. I tried searching for the solution but I guess I either didn't find it or there hasn't been one posted.
my problem is I spooled the results of a query into a .txt file. When I cat the file the formating looks great. All the columns are aligned. However once I mailx the... (2 Replies)
Hi all,
I am having the file below
I need that as below
Thanks,
Arun (12 Replies)
Discussion started by: arunkumar_mca
12 Replies
LEARN ABOUT SUNOS
metaimport
metaimport(1M)metaimport(1M)NAME
metaimport - imports disk sets into existing Solaris Volume Manager configurations
SYNOPSIS
metaimport -s setname [-n] [-v] [-f] [disks...]
metaimport -r [disks...]
metaimport -V
metaimport -?
The metaimport command allows the importing of disk sets, including replicated disk sets, into an existing Solaris Volume Manager configu-
ration. Replicated disk sets are disk sets created using remote replication software.
The default Solaris Volume Manager configuration specifies a maximum number of disk sets that can be configured. The metaimport command
fails if importing the disk set would result in exceeding the number of disk sets configured on the system. To increase the number of disk
sets allowed on a system, see the .
Use metaset(1M) or metastat(1M) to view the configuration of the imported set.
You must run metaimport as root.
metaimport requires a functional Solaris Volume Manager configuration before it runs.
The following options are supported:
-f Force the import, even if a quorum of replicas from the imported disk set is not available. This option could
result in corrupt configurations and should only be used when metaimport fails with the "Insufficient quorum
detected; exiting" error. If only a partial disk set is available, this option might be necessary to successfully
import. Some or all data could be corrupted or unavailable when importing a partial set or a set lacking a replica
quorum.
-n Does not actually perform the operation, but shows the output or errors that would have resulted from the opera-
tion, had it been run.
-r Report on the non-configured disk sets found on the system. If no disk device or LUN is specified, metaimport
reports on all non-configured disk sets attached to the system. When the name of one disk is specified, metaimport
reports on the disk set (or virtual LUN) containing the specified disk. If two or more disks are specified, metaim-
port reports on the set (or sets, if they belong to different disk sets) containing the specified disks. If two or
more disks are specified, metaimport reports on the set (or sets, if they belong to different disk sets) containing
the specified disks.
-s setname Specify the disk set name to use when importing. The imported disk set will be called setname, without regard to
the name it may have had on a different system.
-v Verbose. Provides detailed information about the metadb replica location and status.
-V Version information.
-? Display a help message.
Example 1: Importing a Disk Set
The following example creates a disk set called blue and identifies c1t5d0 as a disk containing a state database replica from the disk set
being imported.
# metaimport -s blue c1t5d0
Example 2: Reporting Disk Sets to Import
The following example scans all disks and LUNs attached to the system and configured as part of the system. It scans for disks that could
be part of a disk set to be imported. Components that are already part of the Solaris Volume Manager configuration are ignored.
This use of metaimport provides suggested forms of the metaimport command to use to actually import the disk sets that have been found. You
can specify a component on the command line to reduce the scope of the scan and generate results more quickly.
# metaimport -r
0 Successful completion.
>0 An error occurred.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M),
metarecover(1M), metareplace(1M), metaroot(1M), metaset(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), attributes(5)
16 May 2005 metaimport(1M)