i have to repartition some of my filesystems ...
I have just one HDD ....
df -k gives this :-
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 830107 45532 726468 6% /
/dev/dsk/c0t0d0s1 1987399 785728 1142050 41% /usr
/proc ... (1 Reply)
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hello Team i have a file with following data (as columns).
I need implement a syntax like below for altering table
ALTER TABLE1 TABLENAME
ADD COLUMN COL1 CHAR(5) NOT NULL WITH DEFAULT
ADD COLUMN COL2 CHAR(5)
..
..
ADD COLUMN COLn CHAR(5) NOT NULL... (1 Reply)
HI all,
I am confused when I am seeing the output of bdf command ioscan -fnC disk, there is no same files which i have seen in bdf output and ioscan output...One volume was mounted in one folder called /teldb and device file path was /dev/disk/disk48. The same i didnt found in ioscan disk... (6 Replies)
Hi I am a newbie here. I tried searching for the solution but I guess I either didn't find it or there hasn't been one posted.
my problem is I spooled the results of a query into a .txt file. When I cat the file the formating looks great. All the columns are aligned. However once I mailx the... (2 Replies)
Hi all,
I am having the file below
I need that as below
Thanks,
Arun (12 Replies)
Discussion started by: arunkumar_mca
12 Replies
LEARN ABOUT HPUX
iobind
iobind(1M)iobind(1M)NAME
iobind - bind a driver to a device
SYNOPSIS
instance]
DESCRIPTION
The command may be used to perform online unbinding of a device LUN hardware path from its current driver and binding a new driver to it.
As part of the binding operation, the specified driver will be bound to the LUN hardware path and also to its corresponding legacy hardware
paths.
The hardware path specified as the argument to the option must be of the form 64000/0x/0x. The driver name specified with the option will
be bound to the LUN and legacy hardware paths. The optional option specifies an instance number to be assigned to the device associated
with the hardware path. If this option is not used, the device will be assigned a new instance number in the new driver's class. The
optional forces the binding to occur at the next reboot if it cannot be done online.
The device must not be in use while the unbind operation is performed. The driver must support online unbinding and binding. If either of
these requirements is false and the option is not given, the user will be asked if the binding can take effect at the next reboot. The
user is given the option to proceed or not.
If a driver supports online unbinding and binding, then after completes, a device will have one of the following software states as shown
by the command:
The specified driver was successfully bound to the hardware path.
The specified driver cannot be used to claim the hardware at
the specified hardware path.
The device at the address is responding, but it is in an
error state.
The device at the specified hardware path is no longer responding.
The specified hardware path is locked. Try again later.
The driver failed.
Options
recognizes the following options:
Force the binding even though a driver does not support online unbinding
and binding or the device is in use. In this case, the binding will take effect at the next reboot.
The LUN hardware path of a device
must be of the form 64000/0x/0x.
The instance number to be assigned to the device.
The name of the driver that the LUN and legacy hardware paths are to be bound to.
RETURN VALUE
Exit values are:
Successful completion.
An error condition occurred.
EXAMPLES
Unbind the driver bound to the device at hardware path and bind the device to Use the default instance number of the driver's class.
Unbind the driver bound to the device at hardware path and bind the device to Assign it the instance number
Do a forced binding. If the driver does not support online binding or the device is busy, the binding will be deferred till next reboot.
WARNINGS
The and commands should not be run at the same time because both commands attempt to bind drivers. In particular, there may be a short
window while will leave a hardware path unbound. If runs during that window, it may bind a different driver to that hardware path. If
this happens, must be executed again to bind the desired driver.
may be executed only by the superuser.
SEE ALSO ioscan(1M), intro(7).
iobind(1M)