Sponsored Content
Special Forums IP Networking Dual Router (routing problem) Post 302954130 by matteo on Friday 4th of September 2015 12:36:52 PM
Old 09-04-2015
Here it is:

Code:
admin@RTN66U:/tmp/home/root# route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
231.111.7.1     0.0.0.0         255.255.255.255 UH    0      0        0 eth0
10.10.202.0     10.10.201.1     255.255.255.0   UG    1      0        0 br0
10.10.100.0     0.0.0.0         255.255.255.0   U     0      0        0 tun21
10.10.200.0     10.10.201.1     255.255.255.0   UG    1      0        0 br0
10.10.201.0     0.0.0.0         255.255.255.0   U     0      0        0 br0
10.10.101.0     10.10.201.1     255.255.255.0   UG    1      0        0 br0
231.111.7.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         231.111.7.1     0.0.0.0         UG    0      0        0 eth0


admin@RTAC3200:/tmp/home/root# route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
231.111.7.1     0.0.0.0         255.255.255.255 UH    0      0        0 vlan2
10.10.202.0     0.0.0.0         255.255.255.0   U     0      0        0 br0
10.10.100.0     10.10.202.1     255.255.255.0   UG    1      0        0 br0
10.10.200.0     10.10.202.1     255.255.255.0   UG    1      0        0 br0
10.10.201.0     10.10.202.1     255.255.255.0   UG    1      0        0 br0
10.10.101.0     0.0.0.0         255.255.255.0   U     0      0        0 tun21
231.111.7.0     0.0.0.0         255.255.255.0   U     0      0        0 vlan2
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         231.111.7.1     0.0.0.0         UG    0      0        0 vlan2


root@LINUXBOX1:/home/root# route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.10.201.254   0.0.0.0         UG    0      0        0 eth1
10.10.101.0     10.10.202.254   255.255.255.0   UG    0      0        0 eth2
10.10.200.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
10.10.201.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
10.10.202.0     0.0.0.0         255.255.255.0   U     0      0        0 eth2

BTW, can you suggest me a book/online course where I can learn how to investigate and solve this kind of problems?

Last edited by matteo; 09-04-2015 at 01:52 PM..
 

10 More Discussions You Might Find Interesting

1. IP Networking

Routing problem

Hi I know this problem is more likely some windows problem but it has also something to do with unix. We have a windows nt environment wich uses AIX (unix) machines as file servers (samba). In our windows network environment we nicely see al the unix file servers via the 10 MB network. Last... (2 Replies)
Discussion started by: Mark Detrez
2 Replies

2. IP Networking

routing problem

following Problem. I configured my SuSE Linux 8.0 as a router. I4l, named, ip_forward, iptables (NAT/MASQUERADING) are running or are aktivatet. I just can get a internet connection about the proxy server squid, but if i want to use other protocols i need functional routing. (I had this... (1 Reply)
Discussion started by: razor
1 Replies

3. IP Networking

Routing Problem

I have a question concerning networking. Could any forum members explain to me why I might be getting "no route to host" messages when I try to connect through ftp and http protocols? I have went to my etc/hosts file and everything seems to be configured properly. I can connect within my... (1 Reply)
Discussion started by: cstovall
1 Replies

4. IP Networking

DI-524 router problem

Hello all, I recently bought D-link (DI-524) router and I have following problem. I setup the network and its running smoothly no problem.. but there is a minor problem that I need to solve. Users can access each other documents etc. but they cannot access each other trough web browser using IP... (1 Reply)
Discussion started by: c0mrade
1 Replies

5. Linux

routing rules for dmz in debian router.

Hi to all. There are eth0(wan) eth1(lan) and eth3(dmz) in my debian router. In dmz is planing dns, ad, dhcp, smtp/pop/imap, https(web-based imap client). I don't configured rules on "iptables" and "route" loads for right relation lan clients with dmz services. Please explain me example... (0 Replies)
Discussion started by: sotich82
0 Replies

6. Slackware

Slackware router problem

I have a Slackware box that I've set up as a router for my home network. It does that and zoneminder and that's pretty much it. It's worked fine for a few years doing this until today. Today the power went out and the UPS could only keep this machine up for about 45 mins before it ran out of... (1 Reply)
Discussion started by: orsty9001
1 Replies

7. AIX

Aix Routing Problem

I need the following solution , please help me... Current situation ip: 192.168.0.12 persistent and 192.168.254.12 service ip gateway: 192.168.0.254 subnet: 255.255.255.0 i have added a new ip on a new nic ip: 10.10.255.40 gateway: 10.10.255.62 subnet: 255.255.255.224 ... (1 Reply)
Discussion started by: rajibimran
1 Replies

8. IP Networking

routing problem/question

Internet Gateway 192.168.0.201 Server 1 192.168.0.101 192.168.1.101 192.168.2.101 gateway: 192.168.0.201 VIP: 192.168.1.100 VIP: 192.168.2.100 Server 2 192.168.0.102 192.168.1.102 192.168.2.102 gateway: 192.168.0.201 Client 1 192.168.2.201 gateway: 192.168.2.100 (1 Reply)
Discussion started by: hopfensp
1 Replies

9. Solaris

Routing problem

Hi, I have two physical interfaces on a servers. We have connected them to differerent subnets. 1) First interface: 10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1 (It is added as default gateway) It is existing set up. It works well 2) Second interface: ... (1 Reply)
Discussion started by: sri243
1 Replies

10. IP Networking

Router problem or ISP problem ?

Hi everyone, I am experiencing discontinuity of Internet service, this started 1 month ago. Everything worked very well for 1 year of intensive use, but now, I have problems reaching my gateway. The gateway is not my router but a node belonging to my ISP and I share the same public IP with... (3 Replies)
Discussion started by: remic
3 Replies
netmasks(4)							   File Formats 						       netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 03:00 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy