I downloaded some applications from CD on a windows2000 PC to a Unix Sco machine using the WS-FTP program.
When I tried to run the applications on the Unix machines I got an error. The files must have been corrupted in the process of transferring files from a Windows 2000 to a Unix Sco... (9 Replies)
hi ,
how do i get boot on sco5.04 if it has a kernel corruption .
and no kernel backup . is there any option on the boot : before i hit enter ?
thx
art
:) (3 Replies)
I'm getting the following error after we replaced a failed disk in a mirrored logical volume. We cleared the device entry in ODM before adding the new disk but when we create the mirror we get the following error after running lslv.
0516-022 lslv: Illegal parameter or structure value.... (1 Reply)
Hello!
Do you know the meaning of...
"crw-rw---- 1 informix informix 64 0x020001 Jan 21 2004 rifxroot"
I don't know what the first "c" means. Furthermor, if I try to copy this file (rifxroot) it appears a message:
"cp: cannot open rifxroot: No such device or address"
I don't... (1 Reply)
I've got a backuptape in cpio format that was accidentally overwritten with a very small batch file. As I assume that the cpio header has been overwritten, I cannot extract files from the backup in the conventional manner:
( cpio -itv </dev/rct0
cpio: this is not a cpio file, bad header)
... (0 Replies)
KDE's Kontact PIM breaks quoted-printable vcard files because it
linebreaks in the middle of a word. Take this text for example:
NOTE;CHARSET=UTF-8;ENCODING=QUOTED-PRINTABLE:=D7=A9=D7=95=D7=A8=D7=94 =D7=A
8=D7=90=D7=A9=D7=95=D7=A0=D7=94.\n=D7=94=D7=A9=D7=95=D7=A8=D7=94 =D7=94=D7=
... (7 Replies)
I was installing sfw sudo and its dependencies (libiconv, libintl, libgcc)on Solaris 10, running on an x86 x4200 and I corrupted some PAM library files. It's a standard Solaris 10 base install, with some added software & libraries from a vendor.
I am on console trying to get root access back,... (1 Reply)
In my Windows 2003 server machine I have a winrar or winzip file that i around 3GB.
This zip/rar file is ftped to a unix mahine (HPUX) . FTP is successful. But when it get this file to check if its has been ftped correctly, the file is corrupted.
Is there something wrong that i am doing while... (4 Replies)
Hi all ,
i have an issue in netra 20 server
when i boot the system its getting rebooting
and it is giving tha" /etc/name_to_sysnum " file not found
i done
OK> boot -ar
then also not solved
please can any body send the answer ASAP
regards (3 Replies)
dear all ,
i was trying to run a cron as root , something happened because it displayed
"/tmp/crontabC5a4lB" 14 lines, 495 characters
cron may not be running - call your system administrator
does anyone knows the problems?
thanks
---------- Post updated at 01:05 PM... (2 Replies)
Discussion started by: semaan
2 Replies
LEARN ABOUT ULTRIX
dhq
dhq(4) Kernel Interfaces Manual dhq(4)Name
dhq - DHQ11 communications interface
Syntax
device dhu0 at uba? csr 0160440 flags 0x?? vector dhurint dhuxint
Description
A DHQ11 provides eight communication lines with modem control.
Each line attached to the DHQ11 communications multiplexer behaves as described in Input and output for each line can be set independently
to run at any of 16 speeds. See for the coding.
Bit i of flags can be specified for a DHQ11 to say that a line is not properly connected and that the line should be treated as hardwired
with carrier always present. Thus, specifying ``flags 0x04'' in the specification of would cause the third line to be treated in this way.
The driver operates under the control of the driver.
Diagnostics
dhu%d %d: DMA ERROR
The indicated channel failed to transfer DMA data within 21.3 microseconds of the bus request being acknowledged or there was a memory par-
ity error.
dhu%d: DIAG. FAILURE
The DHQ11 failed the diagnostics that run at initialization time.
dhu%d: recv. fifo overflow
The character input fifo overflowed before it could be serviced. This can happen if a hard error occurs when the CPU is running with ele-
vated priority. Interrupts are disabled, and the system then prints a message on the console.
dhu%d: DHU HARDWARE ERROR. TX.DMA.START failed
The dhq failed to clear the start bit. Normally, this is cleared to signal that a DMA transfer has completed.
Files
Dialups
See Alsotty(4), MAKEDEV(8)dhq(4)