08-29-2015
Hello hicksd8...Yes the drive is having same problem with other machine....Tried also to clone but got same issue....Like corrupted already :-(
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
Discussion started by: rein
5 Replies
2. Solaris
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Discussion started by: deckard
6 Replies
3. Filesystems, Disks and Memory
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Discussion started by: wesweshahaha
0 Replies
4. UNIX for Advanced & Expert Users
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Discussion started by: ravinandan
0 Replies
5. Solaris
Hello All,
I m very new to this forum.
i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM.
i m trying this server for SUN 10 Practise.
As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt
***************************
#boot cdrom
or
#boot cdrom... (16 Replies)
Discussion started by: amrut_k
16 Replies
6. Solaris
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
Discussion started by: Resadija
6 Replies
7. Solaris
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
Discussion started by: Aon
4 Replies
8. Solaris
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
Discussion started by: sirius20d
1 Replies
9. Solaris
Is there a way to recover label?
I could install (sparc) Solaris again, but it would take a lot of time. (5 Replies)
Discussion started by: orange47
5 Replies
10. Solaris
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
Discussion started by: dunkpancakes
2 Replies
AMMT(8) System Manager's Manual AMMT(8)
NAME
ammt - Amanda version of mt
SYNOPSIS
ammt [ -d ] [ -f|-t device ] command [ count ]
DESCRIPTION
Ammt provides just enough of the standard mt command for the needs of Amanda. This is handy when doing a full restore and the standard mt
program has not yet been found.
Ammt also provides access to the Amanda output drivers that support various tape simulations.
See the amanda(8) man page for more details about Amanda. See the OUTPUT DRIVERS section of amanda(8) for more information on the Amanda
output drivers.
OPTIONS
-d Turn on debugging output.
-f device
Access tape device device. If not specified, the TAPE environment variable is used.
-t device
Same as -f.
command count
Which command to issue, and an optional count of operations.
COMMANDS
Each command may be abbreviated to whatever length makes it unique.
eof|weof count
Write count (default: 1) end of file marks (tapemarks).
fsf count
Skip forward count (default: 1) files.
bsf count
Skip backward count (default: 1) files.
asf count
Position to file number count (default: 0) where zero is beginning of tape. This is the same as a rewind followed by a fsf count.
rewind Rewind to beginning of tape.
offline|rewoffl
Rewind to beginning of tape and unload the tape from the drive.
status Report status information about the drive. Which data reported, and what it means, depends on the underlying operating system, and
may include:
ONLINE Indicates the drive is online and ready.
OFFLINE
Indicates the drive is offline or not ready.
BOT Indicates the drive is at beginning of tape.
EOT Indicates the drive is at end of tape.
PROTECTED
Indicates the tape is write protected.
ds Device status.
er Error register.
fileno Current tape file number.
blkno Current tape block number file.
NOTE: many systems only report good data when a tape is in the drive and ready.
AUTHOR
Marc Mengel <mengel@fnal.gov>
John R. Jackson <jrj@purdue.edu>
SEE ALSO
amanda(8)
AMMT(8)