Hard Drives Undetected on My Machine - But Mounts on All Other Machines Post: 302952378

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Will some one tell me what this means. "warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20." I'm running SCO 505 on a proliant 1600r. Thnank you in advance.

2. Linux

No Hard Drives Have Been Found

I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives...

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

I have a Solaris machine running OpenSolaris v5.11. It came with a hard drive. It's called /dev/dsk/c4d0s0. I added two new hard drives into the box. I can't figure out what it's called in /dev/dsk. There are 210 filenames in /dev/dsk. How do I find out which filename corresponds to the...

4. Solaris

formating and repartitioning an external hard drives

Version: solaris 10 x86 I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac. I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there...

5. Filesystems, Disks and Memory

Help adding new hard drives

Folks; I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version. Is there a command i can use to add the new space or even see if the system can sees them?

6. Solaris

Reinstall old hard drives

I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot...

7. Hardware

Hard Drives and MBR

Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank...

8. Solaris

Trying to boot Solaris without hard drives in T5220

I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode. I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management. Tinkering around I...

9. Solaris

Solaris 8 - Accessing Hard Drives

Hi, I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa? Thank you.

10. UNIX for Beginners Questions & Answers

Understanding volumes and hard drives

Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i...

LEARN ABOUT FREEBSD

ehci

EHCI(4) 						   BSD Kernel Interfaces Manual 						   EHCI(4)

NAME

     ehci -- USB Enhanced Host Controller driver

SYNOPSIS

     device ehci

DESCRIPTION

     The ehci driver provides support for the USB Enhanced Host Controller Interface, which is used by USB 2.0 controllers.

     EHCI controllers are peculiar in that they can only handle the USB 2.0 protocol.  This means that they normally have one or more companion
     controllers (i.e., ohci(4) or uhci(4)) handling USB 1.x devices.  Consequently each USB connector is electrically connected to two USB con-
     trollers.	The handling of this is totally automatic, but can be noticed since USB 1.x and USB 2.0 devices plugged in to the same connector
     appear to connect to different USB busses.

SEE ALSO

     ohci(4), uhci(4), usb(4), xhci(4)

HISTORY

     The ehci device driver first appeared in FreeBSD 5.1.

LOADER TUNABLES

     When the kernel has been compiled with options USB_DEBUG, some tunables become available that affect the behavior of ehci.  These tunables
     can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5).

     hw.usb.ehci.lostintrbug
	     This tunable enables the lost interrupt quirk.  The default value is 0 (off).

     hw.usb.ehci.iaadbug
	     This tunable enables the EHCI doorbell quirk.  The default value is 0 (off).

     hw.usb.ehci.no_hs
	     This tunable disables USB devices to attach like HIGH-speed ones and will force all attached devices to attach to the FULL- or LOW-
	     speed companion controller.  The default value is 0 (off).

BSD
								   March 4, 2012							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Discussion started by: franruiz

2. Linux

No Hard Drives Have Been Found

Discussion started by: tamcomng

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

Discussion started by: sqa777

4. Solaris

formating and repartitioning an external hard drives

Discussion started by: seyiisq