08-08-2015
In my experience most "long beeps" are generated by the hardware's BIOS and indicate memory problems. I would recommend you re-seat all the RAM memory first (in case of a simple poor connection between the memory module and the motherboard), followed by selected removal and testing of a subset of memory modules until the beeps cease. Of course, I could be completely wrong.
This User Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi friends,
i am getting the following error while booting my system which has SCo UNIX .
=========================
H iinit
PANIC: srmountfun-Error 22
mounting of rootdev hd(1/42)
cannot dump 40863 pages to dempdev hd(1/41) : Space for only 0 pages.
Dump not completed.
safe to power off... (3 Replies)
Discussion started by: sveera
3 Replies
2. SCO
hi, i m a newbie and installed sco unix on my machine. Also i installed win-xp. i tried to modify the boot.ini file but it does not give me a choice in the begining.
please guide me on this. do we get a boot loader for unix like LILO or GRUB?
:confused: (3 Replies)
Discussion started by: 187final
3 Replies
3. SCO
anyone know where I can download or get a boot disk for sco unix v/386? I have an old PC running sco unix v/386 3.2. I dont have an install or boot disk. I need to reset the root password. I have looked all over the internet and cannot find it anywhere. any help would be greatly appreciated.... (5 Replies)
Discussion started by: format
5 Replies
4. HP-UX
I am new to HP-UX. I have a external SCSI drive with HP-UX on it. I was trying to clone it to another external scsi drive. I added the new drive to existing LVM. Then I used dd command. But it failed with I/O error. Now I cannot boot it from original drive. It's saying panic: LVM: Configuration... (11 Replies)
Discussion started by: forhad
11 Replies
5. SCO
Hi i have a problem after boot with N1 disk and putting N2 disk and pressing the enter in this message:Insert N2(filesystem) floppy and press after by this(pressing enter) the system is reboot!! why??? :confused:
my old pc is a Pentium II 333mhz 3gb hd 64mb ram
please help!! :( (3 Replies)
Discussion started by: panos_pit
3 Replies
6. SCO
Our system is not booting up properly. It keeps going to this screen:
Enter Run Level (0-6, s or S):
I tried to hit all nos# 0-6 is just goes to hung state.
Tried s or S & it brings me to single user mode. I've checked the file systems & found out that all three had 98%. I tried to... (86 Replies)
Discussion started by: jedimaster
86 Replies
7. UNIX for Dummies Questions & Answers
UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/bootWhat to do? (2 Replies)
Discussion started by: Joaoalpande
2 Replies
8. SCO
UNIX sco release 5.05 system does not boot:
cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/boot
what to do? (1 Reply)
Discussion started by: Joaoalpande
1 Replies
9. UNIX for Advanced & Expert Users
UNIX sco release 5.05 system does not boot:
cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/boot
what to do? (5 Replies)
Discussion started by: Joaoalpande
5 Replies
10. SCO
hi
i have image SCo Unix 5.0.6 and I want transfer on my HP ML350 G5
after Transfer show this message :
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
this hp server used smart array E200i and P400 and sco not recognized HDD
tanks (7 Replies)
Discussion started by: moein.mojtaba
7 Replies
LEARN ABOUT FREEBSD
pnpbios
PNPBIOS(4) BSD/i386 Kernel Interfaces Manual PNPBIOS(4)
NAME
pnpbios -- support for embedded devices on the motherboard
DESCRIPTION
The pnpbios driver enumerates embedded ISA devices on the motherboard whose BIOS supports ``Plug and Play BIOS Specification''. It assigns
ISA bus resources (interrupt line, DMA channel, I/O ports, and memory region) to each device and activates it.
If it cannot assign necessary resources to a device without causing conflict with other devices in the system, the device will not be acti-
vated and will be unavailable to programs.
CAVEATS
There is no explicit way to disable individual embedded devices. The pnpbios driver will find all devices reported by the ``Plug and Play
(PnP)'' BIOS and try to activate them all.
There is no way to explicitly assign particular resource to a device. The resource assignment is fully automatic and there is no provision
for manual override.
SEE ALSO
pnp(4)
STANDARDS
Compaq, Phenix, and Intel, Plug and Play BIOS Specification Version 1.0A, May 5, 1994.
Compaq, Phenix, and Intel, Plug and Play BIOS CLARIFICATION Paper for Plug and Play BIOS Specification Version 1.0A, October 6, 1994.
HISTORY
The pnpbios driver first appeared in FreeBSD 4.0.
AUTHORS
The pnpbios driver was written by Mike Smith.
BSD
September 20, 2001 BSD