For two fields and assuming that line 1 in a file could also be your special character, you could try:
which, with your sample input produces the output:
If you want to try this on a Solaris/SunOS system, change awk to /usr/xpg4/bin/awk.
PS. Just to be clear, the above code produces the same output if the input file is:
instead of the provided sample, while the other suggestions in this thread don't seem to produce the desired output in this case. It isn't clear to me from the provided description of the input file format whether or not this matters for the submitter's real world data.
Last edited by Don Cragun; 07-29-2015 at 03:04 PM..
Reason: Add PS.
hi, i have an awk script and I managed to figure out how to search the max value but Im having difficulty in searching for the min field value.
BEGIN {FS=","; max=0}
NF == 7 {if (max < $6) max = $6;}
END { print man, min}
where $6 is the column of a field separated by a comma (3 Replies)
I'm trying to iterate a UNIX awk script that returns min/max temperature data for each day from a monthly weather data file (01_weath.dat). The temperature data is held in $5. The temps are reported each minute so each day contains 1440 temperature enteries. The below code has gotten me as far as... (5 Replies)
I am running a program as follows (using uniface)
"chngpasswd.sh drg_ldos1 manager64 manager65 SMART2AP"
in which manager64 , manager65 is a variables and keeps on changing, above command works fine but in case we have special characters it fails as shown below
"chngpasswd.sh drg_ldos1... (3 Replies)
Hi guys!
I'm new to scripting and I need to write a script in awk.
Here is example of file on which I'm working
ATOM 4688 HG1 PRO A 322 18.080 59.680 137.020 1.00 0.00
ATOM 4689 HG2 PRO A 322 18.850 61.220 137.010 1.00 0.00
ATOM 4690 CD ... (18 Replies)
Hi,
I have a file which looks like this:
FID IID MISS_PHENO N_MISS N_GENO F_MISS
12AB43131 12AB43131 N 17774 906341 0.01961
65HJ87451 65HJ87451 N 10149 906341 0.0112
43JJ21345 43JJ21345 N 2826 906341 0.003118I would... (11 Replies)
aaa: 3 ms
aaa: 2 ms
aaa: 5 ms
aaa: 10 ms
..........
to get the 3 2 5 10 ...'s min avg and max
something like
min: 2 ms avg: 5 ms max: 10 ms (2 Replies)
I need to find the max/min of columns 1 and 2 of a 2 column file what contains the special character ">".
I know that this will find the max value of column 1.
awk 'BEGIN {max = 0} {if ($1>max) max=$1} END {print max}' input.file
But what if I needed to ignore special characters in the... (3 Replies)
Hi,
I need your kind help to get min and max values from file based on value in $5 .
File1
SP12.3 stc 2240806 2240808 + ID1_N003 ID2_N003T0
SP12.3 sto 2241682 2241684 + ID1_N003 ID2_N003T0
SP12.3 XE 2239943 2240011 + ID1_N003 ID2_N003T0
SP12.3 XE 2240077 2241254 + ID1_N003 ... (12 Replies)
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)