06-27-2015
I just read the Unixware 714 getting started guide.
An upgrade install is possible. But, it installs using pkgadd. You must be able to boot the 711 system in order to do the upgrade. This procedure is different to the Openserver 5 upgrade installation procedure, where you boot from the newer version CD and select the upgrade install.
For the fresh install (of 714), there does not appear to be an option to preserve non root file systems that are on disk 0. So if your RAID5 system is configured as a single logical drive with multiple partitions, you do not have secondary drives.
The RAID controller supports both SAS and SATA drives, although not mixed. I have not checked to see if a standard 2.5in SATA drive will fit in the carrier, or whether you have to purchase an HP drive.
http://sco.com/support/docs/unixware...t/getstart.pdf
Last edited by jgt; 06-27-2015 at 08:50 AM..
Reason: add link
10 More Discussions You Might Find Interesting
1. Programming
dear all ,
iam trying to compile a progam using gcc compiler on a sun 280 R machine running solaris 9 .
iam getting an error in the last step when the compiler tries to link the objects , although the compiler executes some applicarions that contains no objects smoothly,
the error that... (1 Reply)
Discussion started by: ppass
1 Replies
2. UNIX for Dummies Questions & Answers
Hi
i have both Linux and Windows XP on my PC.
i used to use grub as a boot loader and everything was perfect, until
i reinstalled Windows.
apparently, Windows installer installed its own bootloader, that
doesn't recognize Linux.
i tried using a tool called GrubInstaller for Windows, and now... (4 Replies)
Discussion started by: shx2
4 Replies
3. Programming
Hi,
I just pulled out my code from source control, then I compiled, the compilation is successful at that time.
Then I modified one of the source file, Then I compiled, I got the following error
ld: fatal: Symbol referencing errors. No output written to ../../CM/bin/cato
Before... (1 Reply)
Discussion started by: sarwan
1 Replies
4. UNIX for Dummies Questions & Answers
zero experience Unix user here. Cannot boot our Sparc10.
Running:
SunOS release 5.3 Version Generic_Patch
message says:
(Can't load swapgeneric)
Program terminated
Tried to 'boot -s' , but this looks like a problem w/ Generic_Patch maybe?
At bootup, the devices come up fine and it... (0 Replies)
Discussion started by: man_of_action
0 Replies
5. Solaris
I modified the partitions on my Solaris 10 disk using format command in "boot cdrom -s" mode and then tried rebooting with "reboot". It said "Boot load failed".
Why does this happen?
I have faced this error before:( and I went in for a fresh installation of the OS.Can anyone tell me the reason as... (1 Reply)
Discussion started by: lydiaEd
1 Replies
6. SCO
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies
7. Solaris
This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up... (5 Replies)
Discussion started by: trinityforce
5 Replies
8. Solaris
Dear all,
I Need your help,my server v240 with sun solaris 10 can't remote login.I try conncet via rsc and then go to OK prom....and i get the status :
{1} ok boot -a
FATAL: system is not bootable, boot command is disabled
{1} ok boot cdrom -s
FATAL: system is not bootable, boot command is... (2 Replies)
Discussion started by: fredginting
2 Replies
9. Solaris
I have M10-1. Installation OS 10 from cdrom external.
Here message from OK Prompt
{0} ok probe-scsi-all
/pci@8000/pci@4/pci@0/pci@2/pci@0/usb@4,1/cdrom@1
Unit 0 Removable Read Only device HL-DT-STDVDRAM GP65NB60 PF00
But..
{0} ok boot... (3 Replies)
Discussion started by: mbahjiman
3 Replies
10. What is on Your Mind?
Today, I noticed some errors in our SSL cert renewal log files, mostly related to domains where the IP address had changed. Concerned about this, rebuilt out SSL cert, which normally goes well without a hiccup.
However, for today, for some reason which I cannot explain, there was a PHP error... (0 Replies)
Discussion started by: Neo
0 Replies
LEARN ABOUT NETBSD
mlxctl
MLXCTL(8) BSD System Manager's Manual MLXCTL(8)
NAME
mlxctl -- Mylex DAC960 family management utility
SYNOPSIS
mlxctl [-f dev] [-v] [-a] status [drive] [...]
mlxctl [-f dev] [-a] detach [drive] [...]
mlxctl [-f dev] [-a] check [drive] [...]
mlxctl [-f dev] rebuild channel:target
mlxctl [-f dev] cstatus
mlxctl [-f dev] rescan
mlxctl [-f dev] config
DESCRIPTION
The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.
The following options are available:
-a Apply the action to all drives attached to the controller.
-f dev Specify the control device to use. The default is /dev/mlx0.
-v Increased verbosity.
The following commands are available:
cstatus Display the controller's current status.
status Display the status of the specified drives. This command returns 0 if all drives tested are online, 1 if one or more drives are
critical and 2 if one or more are offline.
rescan Re-scan the logical drive table, and attach or detach devices from the system as necessary.
detach Detach the specified drives. Drives must be unmounted and unopened for this command to succeed.
check Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5). This command returns imme-
diately. The status command can be used to monitor the progress of the check.
rebuild Rebuild onto the specified physical drive. Note that there can be only one running rebuild operation per controller at any given
time. This command returns immediately. The cstatus command can be used to monitor the progress of the rebuild.
config Write the current system drive configuration to stdout.
EXAMPLES
Display the status of drive ld3 attached to the controller mlx1:
mlxctl -f /dev/mlx1 -v status ld3
SEE ALSO
ld(4), mlx(4)
HISTORY
The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.
BUGS
Modifying drive configuration is not yet supported.
Some commands do not work with older firmware revisions.
Error log extraction is not yet supported.
BSD
April 10, 2000 BSD