Sponsored Content
Operating Systems HP-UX HPUX 11.23 - server is crawling Post 302947084 by bakunin on Monday 15th of June 2015 10:00:44 AM
Old 06-15-2015
Quote:
Originally Posted by waytec
but when I opened SAM and entered network config it basically locked up and crawl over 2 hours before opening the net config SAM window.
I am in no way a "HP-UX master", but this sounds suspiciously like a resolution problem. Most times when the system is fine but network response is infinitely bad it is for one of two reasons:

1) The DNS server you are using responds very slowly (or not at all). This might come from a severed link between the two machines (for instance a firewall blocking port 53) or whatever. Have a look at /etc/nsswitch, "files" should go before "bind", meaning name resolution first tries a local /etc/hosts file and only then the DNS server. You might want to put all the "important" systems into /etc/hosts so that you do not have to rely on DNS being available.

2) Another possible scenario would be a "physically" severed link to the network. Possible causes would be a switch port set to half-duplex while the system port is set to full-duplex (or vice versa), different link speeds, Auto-Negotiation gone awry, or similar. Half-duplex vs full-duplex is tricky because "ping" will work (most of the time, anyways) but the line speed will be reduced to near zilch.

I hope this helps.

bakunin
This User Gave Thanks to bakunin For This Post:
 

10 More Discussions You Might Find Interesting

1. HP-UX

Finding server Model on HPUX

Hi i am just wondering is there a command in hp that you can find the server model on hpux? Thanks (4 Replies)
Discussion started by: lnineill
4 Replies

2. UNIX for Dummies Questions & Answers

Configuration of email on HPUX server

I am working in an developer 2000 based application where backend is Oracle9i in unix environment. My application has the functionality if email generation. But I am not able to test this functionality as my HPUX server is not configured for emails. Please let me know the steps for configuring mail... (1 Reply)
Discussion started by: sharmavr
1 Replies

3. UNIX for Dummies Questions & Answers

Need an advise Backup HPUX Server while online

I will perform a "fbackup -f /dev/rmt/0m -i /". Can any body advise me on the following: 1. Is this a full backup of the entire file system or like the entire image of the server. Is it ok to do a backup while the server is online. 2. If it is not advisable to do a backup while the server is... (2 Replies)
Discussion started by: real-chess
2 Replies

4. HP-UX

Can't start the cpp server in hpux

Hello, I have writtern the makefile and successfully produce the server exe. But, it doesn't run in hpux11.11 server. compile and link option: /opt/aCC/bin/aCC -Aa -Wl,+s /cc/smc3/root/development/auto_activation/AA_global/obj/smc3/aa_config.o... (0 Replies)
Discussion started by: onlyforforum
0 Replies

5. HP-UX

how to execute script from my desktop windows xp to my HPUX server?

Good day, i would like to get some advice, how will i execute my script in hp ux servers, and how to configure rsh and rexec. thanks (2 Replies)
Discussion started by: kenshinhimura
2 Replies

6. HP-UX

Ignite issue on HPUX server

Hi All, I am getting below error while igniting(restoring image) on 2470 server. i tried with different images it is giving same error. please help me out to resolve this issue * Making VxFS filesystem for "/usr/aethos/snss/suppimpapp1", (/dev/vg00/rsuppimpapp1). *... (3 Replies)
Discussion started by: Prabhu H
3 Replies

7. Shell Programming and Scripting

Need Script to Use CPUs on a HPUX server to simulate Workload Manager on HPUX.

I am running HPUX and using WLM (workload manager). I want to write a script to fork CPUs to basically take CPUs from other servers to show that the communication is working and CPU licensing is working. Basically, I want to build a script that will use up CPU on a server. Any ideas? (2 Replies)
Discussion started by: cpolikowsky
2 Replies

8. UNIX for Advanced & Expert Users

Crawling a MS-Doc using scripting

Hi Everyone How you doing all.Im planning to write a script that will crawl a MS-Document and should take the values from it.Is it possible at all.Im not a scripting guru just want to know your thoughts.. Im planning to do some thing like this: Microsoft Document has: Servername:... (1 Reply)
Discussion started by: coolkid
1 Replies

9. HP-UX

Problem in Configuring kerberos Server on HPUX

Hi, I am getting this error during kerberos server setup in HPUX 11.31 : kdb_create: unknown LDAP backend error while adding master entry to the database ps -ef|grep ldap root 3905 1 0 13:11:36 ? 0:00 /opt/ldapux/bin/ldapclientd Unable to find out the meaning of this... (1 Reply)
Discussion started by: Amit Kulkarni
1 Replies

10. UNIX for Advanced & Expert Users

How to send mail with attachments in hpux server?

I am trying to send a mail alongwith attachments in hpux server. Its not throwing any error but it seems the command is still running,neither its sending the mail. The commands i am using is- uuencode 00PZ00000012OHJMA2.csv | mailx -s "Hello" abc@hp.com uuencode Shell_Script_Sample.ksh |... (1 Reply)
Discussion started by: saga20
1 Replies
TXP(4)							   BSD Kernel Interfaces Manual 						    TXP(4)

NAME
txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device txp Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_txp_load="YES" DESCRIPTION
The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the 3Com Typhoon/Sidewinder chipset. Basic Ethernet functions are provided as well as support for vlan(4) tag removal and insertion assistance, receive ip(4), tcp(4), and udp(4) checksum offloading, and transmit ip(4) checksum offloading. There is currently no support for transmit tcp(4) or udp(4) checksum offload- ing, tcp(4) segmentation, nor ipsec(4) acceleration. Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl(2). The txp interface employs the address resolu- tion protocol described in arp(4) to dynamically map between Internet and Ethernet addresses on the local network. When a txp interface is brought up, by default, it will attempt to auto-negotiate the link speed and duplex mode. The speeds, in order of attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and 10 Mb/s Half Duplex. The txp supports several media types, which are selected via the ifconfig(8) command. The supported media types are: media autoselect Attempt to autoselect the media type (default) media 100baseTX mediaopt full-duplex Use 100baseTX, full duplex media 100baseTX [mediaopt half-duplex] Use 100baseTX, half duplex media 10baseT mediaopt full-duplex Use 10baseT, full duplex media 10baseT [mediaopt half-duplex] Use 10baseT, half duplex HARDWARE
The txp driver supports the following cards: o 3Com 3CR990-TX-95 o 3Com 3CR990-TX-97 o 3Com 3cR990B-TXM o 3Com 3CR990SVR95 o 3Com 3CR990SVR97 o 3Com 3cR990B-SRV SEE ALSO
altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4), vlan(4), ifconfig(8) HISTORY
The txp driver first appeared in OpenBSD 2.9. BSD
March 12, 2009 BSD
All times are GMT -4. The time now is 11:04 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy