100Mb/s full duplex link Post: 302945435

10 More Discussions You Might Find Interesting

1. IP Networking

Problems switching to Full Duplex

We run Compaq UNIX Tru64 5.1. After a switch got replaced our ethernet-card was magically set to half duplex! We saw, that the card was set to Autonegotiate: vmunix: ee1: Autonegotiated, 100 Mbps full duplex So we set the card with ifconfig to 100 Mbps full duplex with the following...

2. UNIX for Dummies Questions & Answers

How to configure Full Duplex and TCP/IP

We are using ZIX 4.3.3 and we need to configure the NIC for ful duplexing and we also need to configure it for a TCP/IP default gateway and DNS server to acccess the Interent. Can you please tell me the commands and procedures for configuring this? Thanks Marc

3. UNIX for Dummies Questions & Answers

Full duplex at HUB?

Ok at the moment I have a hub whit 5 computers connected to it. It's a 10/100 NetGear hub. Ok I heard that there is some command I can run or a file I edit or something like that. But what the command/file/script/whatever does is tells you what connect speed it's connecting to the hub to. ...

4. UNIX for Dummies Questions & Answers

Full Duplex Howto

Dear Members, I was reading a few posts and saw something about installing two Nics so one could use Full Duplex. I remember back in the day of dial up, you could have two modems and use one for upstream and one for downstream. This was called shotgunning. It seems that you can now do the same...

5. Programming

full -duplex ?

what is meant by full duplex and half duplex? b'coz in differences b\w hub and switch ,i heard lot this duplex word so please help me

6. Solaris

How to force a full duplex

I need to change some Ip addresses for my servers to reflect in the NIS map. I also need to force full duplex on the 10/100 cards & 1/2 duplex in the 10 cards. I can change the IP by doing ifconfig <NIC card > plumb up <newip>. Not quite sure on how to force the full / half duplex & how to...

7. SuSE

configure full duplex

How do I configure full duplex on suse 8.2 I tried ethtool -s eth0 speed 100 duplex full autoneg off the above works but when I reboot the machine the configure was lost. How do I configure full duplex so that when the machine get rebooted the configuration will stay. My interface...

8. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1

9. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

10. Programming

C++/Java full-duplex communication

Hello, here's my situation: I have a C++ server running on a well known machine and a number of Java clients running on other machines (assumed as unknown) on the same LAN. What I want to achieve is full duplex communication between those applications, in order to exchange complex objects and data...

LEARN ABOUT CENTOS

pethtool

PETHTOOL(8)															       PETHTOOL(8)

NAME

       pethtool - Display or change ethernet card settings

SYNOPSIS

       pethtool [OPTIONS] [<INTERFACE>]

DESCRIPTION

       This script mimic ethtool behavior, but is written purely in python and python module ethtool.

OPTIONS

       INTERFACE
	   Is the name of the ethernet device on which pethtool should operate.

       -h, --help
	   Show help message and exit.

       -c|--show-coalesce
	   Show coalesce options

       -C|--coalesce
	   Set coalesce options

	       adaptive-rx on|off
	       adaptive-tx on|off
	       rx-usecs N
	       rx-frames N
	       rx-usecs-irq N
	       rx-frames-irq N
	       tx-usecs N
	       tx-frames N
	       tx-usecs-irq N
	       tx-frames-irq N
	       stats-block-usecs N
	       pkt-rate-low N
	       rx-usecs-low N
	       rx-frames-low N
	       tx-usecs-low N
	       tx-frames-low N
	       pkt-rate-high N
	       rx-usecs-high N
	       rx-frames-high N
	       tx-usecs-high N
	       tx-frames-high N
	       sample-interval N

       -i|--driver
	   Show driver information

       -k|--show-offload
	   Get protocol offload information

       -K|--offload

	   Set protocol offload
	       [ tso on|off ]

SEE ALSO

       ethtool(8)

AUTHORS

       Arnaldo Carvalho de Melo <acme@redhat.com>

       Man page written by Miroslav Suchy <msuchy@redhat.com>

								    06/10/2014							       PETHTOOL(8)

10 More Discussions You Might Find Interesting

1. IP Networking

Problems switching to Full Duplex

Discussion started by: arn_ch

2. UNIX for Dummies Questions & Answers

How to configure Full Duplex and TCP/IP

Discussion started by: marc3483

3. UNIX for Dummies Questions & Answers

Full duplex at HUB?

Discussion started by: merlin

4. UNIX for Dummies Questions & Answers

Full Duplex Howto

Discussion started by: Phobos