04-24-2015
That's what I was just coming to grips with. Ok - first time for everything. I've got a mksysb from a couple of weeks ago. I've burned it (volumes 1 of 3) to a DVD and am trying to do the (re)install. interestingly enough I happen to have a new disk which I've swapped into as a replacement for the bad disk.
ok so far. Boot to that cd which works nicely thank you very much.
Trying to do the restore to the new disk and it is circling around a
image.data has invalid file system data.
Can not continue.
I suppose I could try to extract the image.data and look at it, but even if I could, I doubt I'd be able to "put it back" into the mksysb.
I see two options. (1) try to restore to what I think is a good disk and hope for the best, or (2) do a fresh install, then restore from backups, etc. Kind like not to do that one, but I may not have a choice.
10 More Discussions You Might Find Interesting
1. HP-UX
Hello again,
We need to install patches to HP-UX B.11.11 but would like to break the mirror it has (with out damaging it) so that in case of failure we can use this a meassure procedure.
Any ideas on how to do this
Thank you! (2 Replies)
Discussion started by: AQG
2 Replies
2. Solaris
Hi All,
How do you know if you need to break the mirror on solaris 8 patch update?
Here's the patch example, 117350-54. On the site, it's just a low type update and not a medium or critical.
Is breaking a mirror a best practice only or really a requirement to some patch?
Thanks,
itik (1 Reply)
Discussion started by: itik
1 Replies
3. Solaris
Hi All,
How do I break the solaris 8 mirror? And how do I make sure I will point the first hd mirror on reboot.
If the first break mirror won't boot. How do I make the copy mirror to boot?
Thanks in advance,
itik (2 Replies)
Discussion started by: itik
2 Replies
4. AIX
Hello
I have a question
I have a box with Aix 5.3 with rootvg on mirror.
I deleted a filesystem and I create a new one to install some software but when I type lsvg -l rootvg all my filesystems has mirror unless the new one.
My question is I can mirror this fs only ??? or I have to... (9 Replies)
Discussion started by: lo-lp-kl
9 Replies
5. AIX
We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
Discussion started by: jjgarrot
6 Replies
6. AIX
Guys,
In my AIX 6.1 box the rootvg was on hdisk2, I tried to migrated it to hdisk0
Added hisk0 to rootvg , mirrored rootvg and changed bootlist and and sucessfully rebooted from hdisk0
Now I tried to remove the hdisk2 from rootvg so breaked mirror
-bash-3.00# unmirrorvg rootvg hdisk2... (3 Replies)
Discussion started by: kkeng808
3 Replies
7. AIX
Hello all,
I need help for erasing IBM P5 machine running AIX 5.3.
I have 2 system disks (Hardware mirror) and i'm looking for a way like a LIVE CD bootable CD so I can boot with the cd and then format the system disks with a "secure erase" software. (7 Replies)
Discussion started by: kobi gabai
7 Replies
8. Solaris
Hello:
I have a machine built on 2 drives and mirrors have been created to a second set of 2 drives (4 total) on the same platform. SVM.
Might anyone provide guidance to create a second machine by breaking the mirrored set, moving the two mirrors (2) to another machine (same platform type),... (1 Reply)
Discussion started by: 4dailyrunner
1 Replies
9. AIX
Hello,
Few days ago I created both mksysb and savevg archives of rootvg.
How can I restore this rootvg now because the AIX crashed during some software tests. There is no way to start from hdisk0 because most of the system files are deleted (this includes libc.a).
I tough it will be trivial... (6 Replies)
Discussion started by: +Yan
6 Replies
10. Linux
Hi Guys,
I have a mirrored LVM volume, and wish to break the mirror leaving only copy1 (effectively removing copy 0).
Here's the config:
# lvs -a -o +devices
lvdata vg01 mwi-ao 2.19T lvdata_mlog 100.00 lvdata_mimage_0(0),lvdata_mimage_1(0)
vg01... (0 Replies)
Discussion started by: badoshi
0 Replies
LEARN ABOUT NETBSD
lvconvert
LVCONVERT(8) System Manager's Manual LVCONVERT(8)
NAME
lvconvert - convert a logical volume from linear to mirror or snapshot
SYNOPSIS
lvconvert -m|--mirrors Mirrors [--mirrorlog {disk|core}] [--corelog] [-R|--regionsize MirrorLogRegionSize] [-A|--alloc AllocationPolicy]
[-b|--background] [-i|--interval Seconds] [-h|-?|--help] [-v|--verbose] [--version]
LogicalVolume[Path] [PhysicalVolume[Path]...]
lvconvert -s|--snapshot [-c|--chunksize ChunkSize] [-h|-?|--help] [-v|--verbose] [-Z|--zero y|n] [--version]
OriginalLogicalVolume[Path] SnapshotLogicalVolume[Path]
DESCRIPTION
lvconvert will change a linear logical volume to a mirror logical volume or to a snapshot of linear volume and vice versa. It is also used
to add and remove disk logs from mirror devices.
OPTIONS
See lvm for common options.
Exactly one of --mirrors or --snapshot arguments required.
-m, --mirrors Mirrors
Specifies the degree of the mirror you wish to create. For example, "-m 1" would convert the original logical volume to a mirror
volume with 2-sides; that is, a linear volume plus one copy.
--mirrorlog {disk|core}
Specifies the type of log to use. The default is disk, which is persistent and requires a small amount of storage space, usually on
a separate device from the data being mirrored. Core may be useful for short-lived mirrors: It means the mirror is regenerated by
copying the data from the first device again every time the device is activated - perhaps, for example, after every reboot.
--corelog
The optional argument "--corelog" is the same as specifying "--mirrorlog core".
-R, --regionsize MirrorLogRegionSize
A mirror is divided into regions of this size (in MB), and the mirror log uses this granularity to track which regions are in sync.
-b, --background
Run the daemon in the background.
-i, --interval Seconds
Report progress as a percentage at regular intervals.
-s, --snapshot
Create a snapshot from existing logical volume using another existing logical volume as its origin.
-c, --chunksize ChunkSize
Power of 2 chunk size for the snapshot logical volume between 4k and 512k.
-Z, --zero y|n
Controls zeroing of the first KB of data in the snapshot. If the volume is read-only the snapshot will not be zeroed.
Examples
"lvconvert -m1 vg00/lvol1"
converts the linear logical volume "vg00/lvol1" to a two-way mirror logical volume.
"lvconvert --mirrorlog core vg00/lvol1"
converts a mirror with a disk log to a mirror with an in-memory log.
"lvconvert --mirrorlog disk vg00/lvol1"
converts a mirror with an in-memory log to a mirror with a disk log.
"lvconvert -m0 vg00/lvol1"
converts a mirror logical volume to a linear logical volume.
"lvconvert -s vg00/lvol1 vg00/lvol2"
converts logical volume "vg00/lvol2" to snapshot of original volume "vg00/lvol1"
SEE ALSO
lvm(8), vgcreate(8), lvremove(8), lvrename(8), lvextend(8), lvreduce(8), lvdisplay(8), lvscan(8)
Red Hat, Inc LVM TOOLS 2.02.44-cvs (02-17-09) LVCONVERT(8)