Hi all,
Can someone advice, why I'm getting a segmentation fault on a Linux system for a program which looks like the below one--:
typedef struct idev{
int p,
char q;
} Idev;
typedef struct abc{
int i;
Idev *idev_ptr;
} ABC;
int main(){
ABC a_var;
char str;
int... (4 Replies)
Is there a limit to the number of LUNS that can be concatenated using Solaris Volume manager with Soft partitions?
I have worked with some AIX admins in the past and there was such a limitation therefore limiting the size the filesystem could grow to.
Is there such a limitation in Solaris 9... (6 Replies)
I'm piping the results of a tcpdump into a shell script and want certain commands executed (specifically the firing of an SNMP alert) based on a grep for certain contents in the output of tcpdump.
For example, I have
#!/bin/bash
while read str; do
grep 'ttl 64' -q && sudo snmptrap -v 1... (2 Replies)
System: Sun M3000 and M4000
OS: Solaris 10 (fully up to date with latest patches)
iSCSI HBA: 2x QLE4060C (QLogic)
In each system are 2 QLE4060C iSCSI adapters.
I manage to set up both HBA's to connect to the LUNs on the SAN
However I don't manage to enable multi-pathing.
Made the... (4 Replies)
hi,
what are the steps to detect and configure a new attached lun in Solaris 10.
Is there any difference between cfgadm and luxadm command ?
rgds,
snjksh (5 Replies)
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
need to do LUN masking at qlogic HBA level..at RHEL 5.x
I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this..
Is there a way to do this at all ??
:wall: (0 Replies)
Hi All,
I'm using Solaris server, SunOS 5.10 Generic_144488-08 sun4u sparc SUNW, SPARC-Enterprise.
There is a newly created LUN of 250GB (EMC). I've scanned the system and able to see the new LUN.
For example:
103. emcpower19a <DGC-VRAID-0430 cyl 48638 alt 2 hd 256 sec 16>... (4 Replies)
Hi,
GetName()
{
if
then
echo " Please enter the name: "
read Name
tempvar=0
while read line
do
if
then
tempvar=`expr $tempvar + 1`
echo $tempvar
... (10 Replies)
How to get LUN WWN (i.e LUN mapped from a storage box say Symmetrix or clariion) in Solaris. fcinfo command does give the Target port wwn but what i'm looking for is the LUN WWN. Any help is appreciated. (2 Replies)
Discussion started by: Manish00712
2 Replies
LEARN ABOUT SUNOS
hba.conf
hba.conf(4)hba.conf(4)NAME
hba.conf - configuration file for the HBAAPI library
The /etc/hba.conf file is used to specify the Vendor-Specific Libraries that are installed on the system. This file is used by the Common
Library to load the individual VSLs when HBA_LoadLibrary(3HBAAPI) is called. If changes are made to the file while the library is in use,
the library should be freed and reloaded. A version 1 VSL is compatible only with a version 1 Common Library. A version 2 VSL is compatible
with both a version 1 and a version 2 Common Library.
Each VSL entry is a single line of the form:
"name" "library path"
where:
name is the description of library. The library name should be prepended with the domain of the manufacturer of the library.
library path is the absolute path to the shared object library file.
Example 1: Contents of /etc/hba.conf
#
# This file contains names and references to HBA libraries
#
# Format:
#
# <library name> <library pathname>
#
# The library name should be prepended with the domain of
# the manufacturer or driver author.
com.sun.fchba32 /usr/lib/libsun_fc.so.1
com.sun.fchba64 /usr/lib/sparcv9/libsun_fc.so.1
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
HBA_LoadLibrary(3HBAAPI), libhbaapi(3LIB), attributes(5)
The HBAAPI is provided in both 32- and 64-bit versions, but only one configuration file is specified. As a result, both 32- and 64-bit VSL
libraries must be specified within the same file. When using the 32-bit Common Library, the 64-bit VSLs will fail to load. When using the
64-bit Common Library, the 32-bit VSLs will fail to load. These failures are silently ignored by the Common Library during normal usage,
but can result in warning messages when running client applications in a debugger.
4 Sep 2003 hba.conf(4)